PlainWorker
Employers › PA

Manufacturing · Carnegie, PA

Mechanical & Ceramic Solutions INC.

According to OSHA enforcement records (2010–2026), Mechanical & Ceramic Solutions INC. ranks #27,664 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 4 inspections.

Upper half by penalty92% serious
$13,049
OSHA penalties
13
Violations cited
4
OSHA inspections
#27,664
of 99,447 penalized employers

Mechanical & Ceramic Solutions INC. in Carnegie, PA has been the subject of 4 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $13,049. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Mechanical & Ceramic Solutions INC. 4 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 13 violations, averaging 3.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #27,664 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Custom Manufacturing Services INC. in Princeton, WV is another manufacturing employer with 3 OSHA inspections on record and $13,050 in current penalties.

3.3
violations per inspection
92.3%
of violations were serious
#27,664
of 99,447 penalized employers

Compliance score

F 43/100
  • F OSHA safety compliance: 13 violations across 4 OSHA inspections (3.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Mechanical & Ceramic Solutions INC. sits roughly in line with peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$13,049 Bottom 28% least affordable more affordable than 28% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Mechanical & Ceramic Solutions INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.0019.138.357.476.5OSHA inspectionsViolations citedPM ENGINEERED SOLUTI…, OSHA inspections: 4 · Violations cited: 73FANTASY COOKIE CORP., OSHA inspections: 4 · Violations cited: 9ARCH WOOD PROTECTION…, OSHA inspections: 4 · Violations cited: 14CUSTOM CAST MARBLEWO…, OSHA inspections: 4 · Violations cited: 34JAMES SKINNER BAKING…, OSHA inspections: 4 · Violations cited: 3PILGRIM'S PRIDE CORP…, OSHA inspections: 4 · Violations cited: 41BUSHNELL ILLINOIS TA…, OSHA inspections: 4 · Violations cited: 17CANAM BRIDGES US INC., OSHA inspections: 4 · Violations cited: 5CUSTOM ALUMINUM PROD…, OSHA inspections: 4 · Violations cited: 14OHIO VALLEY STAVE, I…, OSHA inspections: 4 · Violations cited: 13MINERVA DAIRY, INC., OSHA inspections: 4 · Violations cited: 15PEET'S COFFEE, INC., OSHA inspections: 4 · Violations cited: 3MIS INC, OSHA inspections: 4 · Violations cited: 20AMTEX-NMS, INC., OSHA inspections: 4 · Violations cited: 11AMANDA MANUFACTURING, OSHA inspections: 4 · Violations cited: 5AMERICAN CRYSTAL SUG…, OSHA inspections: 4 · Violations cited: 9AMERICAN PLASTIC TOY…, OSHA inspections: 4 · Violations cited: 35LAKESHORE PALLET, INC., OSHA inspections: 4 · Violations cited: 19BROTHERS FINE FOODS …, OSHA inspections: 4 · Violations cited: 20EAGLE FAMILY FOODS G…, OSHA inspections: 4 · Violations cited: 2Mechanical & Ceramic…, OSHA inspections: 4 · Violations cited: 13
Mechanical & Ceramic Solutions INC. has 4 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Mechanical & Ceramic Solutions INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Mechanical & Ceramic Solutions INC. ranks #12,869 at $13,049 current penalty.

How Mechanical & Ceramic Solutions INC. Compares

Mechanical & Ceramic Solutions INC.'s 3.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2014-01-30

Last Inspection

2023-08-31

Inspection Span

10 yrs

Violations / Inspection

3.3

Avg Penalty / Inspection

$3,262

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 10 years, averaging 3.3 violations per visit. That's $3,262 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

92.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

7.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$18,238

Current Penalty Amount

$13,049

Penalty Reduction

28.5%

What this shows Penalties were reduced by $5,189 from the initial assessment of $18,238. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Mechanical & Ceramic Solutions INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Mechanical & Ceramic Solutions INC. Industry Avg
Inspections 4 2.6
Violations 13 8.0
Total Penalty $13,049 $15,763
Avg Penalty per Inspection $3,262 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Mechanical & Ceramic Solutions INC., both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($13,049 here).

The Oakwood Group $13,050 MI Custom Manufacturing Services INC. $13,050 WV Lee Kum Kee (USA) Foods INC. $13,050 CA Eastern Vault CO., INC. $13,050 WV

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

PM Engineered Solutions INC. 4 insp. Watertown, CT Fantasy Cookie CORP. 4 insp. Sylmar, CA Arch Wood Protection, INC. 4 insp. Conley, GA Custom Cast Marbleworks, INC. 4 insp. Cincinnati, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Robson Corporation
Sarasota, FL
1 inspections $11,532
Standard Iron Works
Scranton, PA
3 inspections $13,050
The Oakwood Group
Taylor, MI
3 inspections $13,050
Custom Manufacturing Services INC.
Princeton, WV
3 inspections $13,050
Lee Kum Kee (USA) Foods INC.
City of Industry, CA
2 inspections $13,050

Compare Mechanical & Ceramic Solutions INC. vs Robson Corporation side-by-side →

What to do with this record

Use Mechanical & Ceramic Solutions INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Mechanical & Ceramic Solutions INC. against Robson Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Mechanical & Ceramic Solutions INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Mechanical & Ceramic Solutions INC. safe to work at? ▼
Based on OSHA records, Mechanical & Ceramic Solutions INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 4 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Mechanical & Ceramic Solutions INC. have? ▼
Mechanical & Ceramic Solutions INC. has 13 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $13,049.
How many OSHA inspections has Mechanical & Ceramic Solutions INC. had? ▼
Mechanical & Ceramic Solutions INC. has had 4 OSHA inspections, with the first recorded on 2014-01-30 and the most recent on 2023-08-31. This averages 3.3 violations per inspection.
What is the total penalty amount for Mechanical & Ceramic Solutions INC.? ▼
Mechanical & Ceramic Solutions INC. has been assessed $13,049 in current OSHA penalties, reduced from an initial assessment of $18,238 (a 28.5% reduction).
Does Mechanical & Ceramic Solutions INC. have any serious or willful violations? ▼
Yes. Mechanical & Ceramic Solutions INC. has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Mechanical & Ceramic Solutions INC. operate in? ▼
Mechanical & Ceramic Solutions INC. operates in the Manufacturing sector (NAICS code 339999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Mechanical & Ceramic Solutions INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Mechanical & Ceramic Solutions INC. ranks #27,664 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Mechanical & Ceramic Solutions INC.'s safety record compare to industry average? ▼
Mechanical & Ceramic Solutions INC.'s total OSHA penalty of $13,049 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Custom Manufacturing Services INC. in Princeton, WV is a similar manufacturing employer with $13,050 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.