PlainWorker
Employers › IL

Manufacturing · Greenville, IL

Masa Milling, INC.

According to OSHA enforcement records (2010–2026), Masa Milling, INC. has a concerning safety record: 11 violations across 3 inspections. See the full breakdown below.

Top 25% by penalty55% serious
$18,502
OSHA penalties
11
Violations cited
3
OSHA inspections
#19,207
of 100,495 penalized employers

Masa Milling, INC. in Greenville, IL has been the subject of 3 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $18,502. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Masa Milling, INC. 3 times over 2 years, roughly annually. These inspections resulted in 11 violations, averaging 3.7 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Cemline Corporation in Cheswick, PA is another manufacturing employer with 4 OSHA inspections on record and $18,501 in current penalties.

3.7
violations per inspection
54.5%
of violations were serious
81%
of penalized employers rank lower

How Masa Milling, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Masa Milling, INC. runs moderately above peers (1.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$18,502 Bottom 19% least affordable more affordable than 19% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Masa Milling, INC.

The federal enforcement record for Masa Milling, INC. in Greenville, IL includes 3 OSHA inspections and 11 violations, translating to 3.67 violations per inspection. Of those violations, 6 (54.5%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $32,538 in initial penalties against this employer, later adjusted to a current total of $18,502 - a 43.1% reduction. Average penalty per inspection works out to $6,167. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.2x the sector average).

Inspection activity spans from 2021-12-28 to 2024-05-23, a window of roughly 2 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2021-12-28

Last Inspection

2024-05-23

Inspection Span

2 yrs

Violations / Inspection

3.7

Avg Penalty / Inspection

$6,167

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 2 years, averaging 3.7 violations per visit. That's $6,167 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

6

Serious

54.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

45.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$32,538

Current Penalty Amount

$18,502

Penalty Reduction

43.1%

What this shows Penalties were reduced by $14,036 from the initial assessment of $32,538. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Masa Milling, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Masa Milling, INC. Industry Avg
Inspections 3 2.5
Violations 11 7.8
Total Penalty $18,502 $15,410
Avg Penalty per Inspection $6,167 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Magnode a Shape CORP. Company
Trenton, OH
2 inspections $18,502
Cemline Corporation
Cheswick, PA
4 inspections $18,501
Caltech Manufacturing, INC.
Ivyland, PA
2 inspections $18,501
Altec Industries, INC.
Saint Joseph, MO
3 inspections $18,504
Middlefield Holding Company
Middlefield, OH
2 inspections $18,504

Compare Masa Milling, INC. vs Magnode a Shape CORP. Company side-by-side →

Frequently Asked Questions

Is Masa Milling, INC. safe to work at? ▼
Based on OSHA records, Masa Milling, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 11 violations across 3 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Masa Milling, INC. have? ▼
Masa Milling, INC. has 11 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $18,502.
How many OSHA inspections has Masa Milling, INC. had? ▼
Masa Milling, INC. has had 3 OSHA inspections, with the first recorded on 2021-12-28 and the most recent on 2024-05-23. This averages 3.7 violations per inspection.
What is the total penalty amount for Masa Milling, INC.? ▼
Masa Milling, INC. has been assessed $18,502 in current OSHA penalties, reduced from an initial assessment of $32,538 (a 43.1% reduction).
Does Masa Milling, INC. have any serious or willful violations? ▼
Yes. Masa Milling, INC. has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Masa Milling, INC. operate in? ▼
Masa Milling, INC. operates in the Manufacturing sector (NAICS code 311211). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Masa Milling, INC.'s safety record compare to industry average? ▼
Masa Milling, INC.'s total OSHA penalty of $18,502 is above the Manufacturing industry average of $15,410 per employer (1.2x the average). The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Cemline Corporation in Cheswick, PA is a similar manufacturing employer with $18,501 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in IL

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Masa Milling, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.