PlainWorker
Employers › GA

Manufacturing · Warner Robins, GA

Marble Masters of Middle Georgia, INC.

According to OSHA enforcement records (2010–2026), Marble Masters of Middle Georgia, INC. ranks #31,895 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 20 violations across 3 inspections.

Upper half by penalty80% serious
$11,200
OSHA penalties
20
Violations cited
3
OSHA inspections
#31,895
of 99,447 penalized employers

Marble Masters of Middle Georgia, INC. in Warner Robins, GA has been the subject of 3 OSHA workplace inspections and 20 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,200. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Marble Masters of Middle Georgia, INC. 3 times over 2 years, roughly annually. These inspections resulted in 20 violations, averaging 6.7 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #31,895 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 16 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Global Boundaries INC. in Sarasota, FL is another manufacturing employer with 2 OSHA inspections on record and $11,200 in current penalties.

6.7
violations per inspection
80.0%
of violations were serious
#31,895
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 20 violations across 3 OSHA inspections (6.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Marble Masters of Middle Georgia, INC. runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$11,200 Bottom 32% least affordable more affordable than 32% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Marble Masters of Middle Georgia, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.88.214.520.827.1OSHA inspectionsViolations citedA-BRITE PLATING COMP…, OSHA inspections: 3 · Violations cited: 17SUOMINEN US HOLDINGS…, OSHA inspections: 3 · Violations cited: 22NIDRA LLC, OSHA inspections: 3 · Violations cited: 26ARCELORMITTAL, OSHA inspections: 3 · Violations cited: 21AMTECH SOUTHEAST LLC, OSHA inspections: 3 · Violations cited: 18TENNECO-WALKER MANUF…, OSHA inspections: 3 · Violations cited: 10COSMEC, INC., OSHA inspections: 3 · Violations cited: 15SHERMAN ROTO TANK, LLC, OSHA inspections: 3 · Violations cited: 20STELLA-JONES CORPORA…, OSHA inspections: 3 · Violations cited: 3APEL CONSTRUCTION SE…, OSHA inspections: 3 · Violations cited: 11TORCH STEEL PROCESSI…, OSHA inspections: 3 · Violations cited: 10ARSENAL COMMUNICATIO…, OSHA inspections: 3 · Violations cited: 14GA RICHARDS, OSHA inspections: 3 · Violations cited: 3ADVANTAGE SALES & SU…, OSHA inspections: 3 · Violations cited: 5CUMAR INC., OSHA inspections: 3 · Violations cited: 16EXTRUSIONS INC, OSHA inspections: 3 · Violations cited: 6MAF INDUSTRIES INC, OSHA inspections: 3 · Violations cited: 4INDIAN RIVER BEVERAG…, OSHA inspections: 3 · Violations cited: 8DUNN PALLET CO., OSHA inspections: 3 · Violations cited: 3POLYMER CORPORATION, OSHA inspections: 3 · Violations cited: 19Marble Masters of Mi…, OSHA inspections: 3 · Violations cited: 20
Marble Masters of Middle Georgia, INC. has 3 OSHA inspections on record and 20 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Marble Masters of Middle Georgia, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Marble Masters of Middle Georgia, INC. ranks #14,566 at $11,200 current penalty.

How Marble Masters of Middle Georgia, INC. Compares

Marble Masters of Middle Georgia, INC.'s 6.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-10-29

Last Inspection

2014-05-07

Inspection Span

2 yrs

Violations / Inspection

6.7

Avg Penalty / Inspection

$3,733

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 6.7 violations per visit. That's $3,733 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

16

Serious

80.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

20.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$40,400

Current Penalty Amount

$11,200

Penalty Reduction

72.3%

What this shows Penalties were reduced by $29,200 from the initial assessment of $40,400. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Marble Masters of Middle Georgia, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Marble Masters of Middle Georgia, INC. Industry Avg
Inspections 3 2.6
Violations 20 8.0
Total Penalty $11,200 $15,763
Avg Penalty per Inspection $3,733 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Marble Masters of Middle Georgia, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($11,200 here).

Global Boundaries INC. $11,200 FL Golden Leaf Energy, INC. $11,200 LA McKinney Lumber, INC. $11,200 AL CDP Industries $11,200 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

A-Brite Plating Company 3 insp. Cleveland, OH Suominen US Holdings, INC. 3 insp. Green Bay, WI Nidra LLC 3 insp. Chesapeake, VA Arcelormittal 3 insp. Vinton, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Global Boundaries INC.
Sarasota, FL
2 inspections $11,200
Golden Leaf Energy, INC.
Harvey, LA
2 inspections $11,200
McKinney Lumber, INC.
Tuscumbia, AL
4 inspections $11,200
CDP Industries
Latrobe, PA
2 inspections $11,200
Capital Engineering & Manufacturing CO.
Harvey, IL
3 inspections $11,200

Compare Marble Masters of Middle Georgia, INC. vs Global Boundaries INC. side-by-side →

What to do with this record

Use Marble Masters of Middle Georgia, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Marble Masters of Middle Georgia, INC. against Global Boundaries INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Marble Masters of Middle Georgia, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Marble Masters of Middle Georgia, INC. safe to work at? ▼
Based on OSHA records, Marble Masters of Middle Georgia, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 20 violations across 3 inspections, including 16 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Marble Masters of Middle Georgia, INC. have? ▼
Marble Masters of Middle Georgia, INC. has 20 OSHA violations on record, including 16 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,200.
How many OSHA inspections has Marble Masters of Middle Georgia, INC. had? ▼
Marble Masters of Middle Georgia, INC. has had 3 OSHA inspections, with the first recorded on 2012-10-29 and the most recent on 2014-05-07. This averages 6.7 violations per inspection.
What is the total penalty amount for Marble Masters of Middle Georgia, INC.? ▼
Marble Masters of Middle Georgia, INC. has been assessed $11,200 in current OSHA penalties, reduced from an initial assessment of $40,400 (a 72.3% reduction).
Does Marble Masters of Middle Georgia, INC. have any serious or willful violations? ▼
Yes. Marble Masters of Middle Georgia, INC. has 16 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Marble Masters of Middle Georgia, INC. operate in? ▼
Marble Masters of Middle Georgia, INC. operates in the Manufacturing sector (NAICS code 326199). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Marble Masters of Middle Georgia, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Marble Masters of Middle Georgia, INC. ranks #31,895 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Marble Masters of Middle Georgia, INC.'s safety record compare to industry average? ▼
Marble Masters of Middle Georgia, INC.'s total OSHA penalty of $11,200 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Global Boundaries INC. in Sarasota, FL is a similar manufacturing employer with $11,200 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.