PlainWorker
Employers › IL

Manufacturing · HARVEY, IL

CAPITAL ENGINEERING & MANUFACTURING CO.

OSHA records show a concerning safety record: 19 violations across 3 inspections — below the Manufacturing industry average for penalties.

3
OSHA inspections
19
Violations cited
$11,200
OSHA penalties

CAPITAL ENGINEERING & MANUFACTURING CO. in HARVEY, IL has been the subject of 3 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,200. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

CAPITAL ENGINEERING & MANUFACTURING CO. has been inspected 3 times by OSHA over 1 year. These inspections resulted in 19 violations, averaging 6.3 violations per inspection. Of these, 17 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, CAPITAL ENGINEERING & MANUFACTURING CO. has been inspected more frequently.

6.3
violations per inspection
89.5%
of violations were serious
0.81×
Manufacturing industry-avg penalty

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows CAPITAL ENGINEERING & MANUFACTURING CO. sits below the Manufacturing per-employer average, a comparatively lighter enforcement footprint than its peers.

Source U.S. Department of Labor — OSHA enforcement extracts As of 2026

What the Data Says About CAPITAL ENGINEERING & MANUFACTURING CO.

The federal enforcement record for CAPITAL ENGINEERING & MANUFACTURING CO. in HARVEY, IL includes 3 OSHA inspections and 19 violations, translating to 6.33 violations per inspection. Of those violations, 17 (89.5%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $25,400 in initial penalties against this employer, later adjusted to a current total of $11,200 — a 55.9% reduction. Average penalty per inspection works out to $3,733. Against the Manufacturing industry average of $13,853 per employer, this record runs below peers.

Inspection activity spans from 2011-06-03 to 2012-05-29, a window of roughly 1 year. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
3
First Inspection
2011-06-03
Last Inspection
2012-05-29
Inspection Span
1 year
Violations per Inspection
6.3
Avg Penalty per Inspection
$3,733
Industry Avg per Inspection
$5,418

Violation Breakdown

17
Serious
89.5% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
2
Other-Than-Serious
10.5% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$25,400
Current Penalty Amount
$11,200
Penalty Reduction
55.9%

Penalties were reduced by $14,200 from the initial assessment of $25,400. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How CAPITAL ENGINEERING & MANUFACTURING CO. compares to the Manufacturing sector, which has 23,042 employers tracked by PlainWorker.

Metric CAPITAL ENGINEERING & MANUFACTURING CO. Industry Avg
Inspections 3 2.6
Violations 19 8.2
Total Penalty $11,200 $13,853
Avg Penalty per Inspection $3,733 $5,418
View all 23,042 employers in Manufacturing →

Explore related data

Manufacturing safety record →

Inspections, violations, and penalties across the Manufacturing sector.
IL enforcement →

Top violators and statewide OSHA & WHD totals for IL.
Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process
How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes
Your Rights Under OSHA

Know your workplace safety rights and how to exercise them
Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages
Most Dangerous Industries

Which industries face the highest rates of violations and penalties
Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Manufacturing

DAEHAN SOLUTION NEVADA, LLC.
FERNLEY, NV
7 inspections $4.70M
JOON, LLC
CUSSETA, AL
8 inspections $2.55M
SUNFIELD, INC.
HEBRON, OH
8 inspections $2.51M
Byton North America
Santa Clara, CA
0 inspections $0
REPUBLIC STEEL
CANTON, OH
20 inspections $1.64M

Compare CAPITAL ENGINEERING & MANUFACTURING CO. vs DAEHAN SOLUTION NEVADA, LLC. side-by-side →

Frequently Asked Questions

Is CAPITAL ENGINEERING & MANUFACTURING CO. safe to work at? ▼
Based on OSHA records, CAPITAL ENGINEERING & MANUFACTURING CO.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 19 violations across 3 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does CAPITAL ENGINEERING & MANUFACTURING CO. have? ▼
CAPITAL ENGINEERING & MANUFACTURING CO. has 19 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,200.
How many OSHA inspections has CAPITAL ENGINEERING & MANUFACTURING CO. had? ▼
CAPITAL ENGINEERING & MANUFACTURING CO. has had 3 OSHA inspections, with the first recorded on 2011-06-03 and the most recent on 2012-05-29. This averages 6.3 violations per inspection.
What is the total penalty amount for CAPITAL ENGINEERING & MANUFACTURING CO.? ▼
CAPITAL ENGINEERING & MANUFACTURING CO. has been assessed $11,200 in current OSHA penalties, reduced from an initial assessment of $25,400 (a 55.9% reduction).
Does CAPITAL ENGINEERING & MANUFACTURING CO. have any serious or willful violations? ▼
Yes. CAPITAL ENGINEERING & MANUFACTURING CO. has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does CAPITAL ENGINEERING & MANUFACTURING CO. operate in? ▼
CAPITAL ENGINEERING & MANUFACTURING CO. operates in the Manufacturing sector (NAICS code 332312). This industry has 23,042 employers tracked by PlainWorker, with 58,916 total OSHA inspections and $319.21M in cumulative penalties.
What are my rights if I work at CAPITAL ENGINEERING & MANUFACTURING CO.? ▼
Under the Occupational Safety and Health Act, employees at CAPITAL ENGINEERING & MANUFACTURING CO. have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against CAPITAL ENGINEERING & MANUFACTURING CO.? ▼
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does CAPITAL ENGINEERING & MANUFACTURING CO.'s safety record compare to industry average? ▼
CAPITAL ENGINEERING & MANUFACTURING CO.'s total OSHA penalty of $11,200 is below the Manufacturing industry average of $13,853 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer.

Explore PlainWorker

Manufacturing Industry

All 23,042 employers in this sector
Employers in IL

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Read our methodology — how this data is sourced, computed, and verified.

Verify with OSHA establishment search →