Manufacturing · Latrobe, PA

Latrobe Specialty Metals, LLC

According to OSHA enforcement records (2010–2026), Latrobe Specialty Metals, LLC ranks #9,454 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 8 violations across 4 inspections.

Top 10% by penalty38% serious
$32,439
OSHA penalties
8
Violations cited
4
OSHA inspections
#9,454
of 99,447 penalized employers

Latrobe Specialty Metals, LLC in Latrobe, PA has been the subject of 4 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $32,439. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Latrobe Specialty Metals, LLC 4 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 8 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #9,454 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Conner Colorado, LLC in Denver, CO is another manufacturing employer with 2 OSHA inspections on record and $32,440 in current penalties.

2.0
violations per inspection
37.5%
of violations were serious
#9,454
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 8 violations across 4 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Latrobe Specialty Metals, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Latrobe Specialty Metals, LLC runs well above peers (2.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$32,439 Bottom 10% least affordable more affordable than 10% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). This entry sits in this band. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Latrobe Specialty Metals, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.00.514.32841.855.5OSHA inspectionsViolations citedCORN ISLAND SHIPYARD…, OSHA inspections: 4 · Violations cited: 53OLSON FABRICATION, I…, OSHA inspections: 4 · Violations cited: 33INEOS ABS (USA) LLC, OSHA inspections: 4 · Violations cited: 25VIKING PAPER CORPORA…, OSHA inspections: 4 · Violations cited: 13KWS MANUFACTURING CO…, OSHA inspections: 4 · Violations cited: 36FUSION BABBITTING CO…, OSHA inspections: 4 · Violations cited: 33ROOSEVELT PAPER COMP…, OSHA inspections: 4 · Violations cited: 5CUSTOM GLASS SOLUTIO…, OSHA inspections: 4 · Violations cited: 5THREE RIVERS BOAT & …, OSHA inspections: 4 · Violations cited: 32AWNEX, INC., OSHA inspections: 4 · Violations cited: 22PACEM DEFENSE LLC, OSHA inspections: 4 · Violations cited: 3TASLER INC, OSHA inspections: 4 · Violations cited: 20NIAGARA FIBERBOARD I…, OSHA inspections: 4 · Violations cited: 20KIRCHHOFF AUTOMOTIVE, OSHA inspections: 4 · Violations cited: 10CULINARY ART'S SPECI…, OSHA inspections: 4 · Violations cited: 14SUPERIOR SHEDS, INC., OSHA inspections: 4 · Violations cited: 8ALLIED SPECIALTY FOO…, OSHA inspections: 4 · Violations cited: 13GUNDERSON LLC, OSHA inspections: 4 · Violations cited: 30PIONEER FORGE, OSHA inspections: 4 · Violations cited: 11THE AMERICAN BOTTLIN…, OSHA inspections: 4 · Violations cited: 9Latrobe Specialty Me…, OSHA inspections: 4 · Violations cited: 8
Latrobe Specialty Metals, LLC has 4 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Latrobe Specialty Metals, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Latrobe Specialty Metals, LLC ranks #4,707 at $32,439 current penalty.

How Latrobe Specialty Metals, LLC Compares

Latrobe Specialty Metals, LLC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2017-06-26

Last Inspection

2026-06-24

Inspection Span

9 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$8,110

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 9 years, averaging 2.0 violations per visit. That's $8,110 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

37.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

62.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$53,134

Current Penalty Amount

$32,439

Penalty Reduction

38.9%

What this shows Penalties were reduced by $20,695 from the initial assessment of $53,134. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Latrobe Specialty Metals, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Latrobe Specialty Metals, LLC Industry Avg
Inspections 4 2.6
Violations 8 8.0
Total Penalty $32,439 $15,763
Avg Penalty per Inspection $8,110 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Latrobe Specialty Metals, LLC, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($32,439 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Latrobe Specialty Metals, LLC vs Conner Colorado, LLC side-by-side →

What to do with this record

Use Latrobe Specialty Metals, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Latrobe Specialty Metals, LLC against Conner Colorado, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Latrobe Specialty Metals, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Latrobe Specialty Metals, LLC safe to work at?
Based on OSHA records, Latrobe Specialty Metals, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 8 violations across 4 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Latrobe Specialty Metals, LLC have?
Latrobe Specialty Metals, LLC has 8 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $32,439.
How many OSHA inspections has Latrobe Specialty Metals, LLC had?
Latrobe Specialty Metals, LLC has had 4 OSHA inspections, with the first recorded on 2017-06-26 and the most recent on 2026-06-24. This averages 2.0 violations per inspection.
What is the total penalty amount for Latrobe Specialty Metals, LLC?
Latrobe Specialty Metals, LLC has been assessed $32,439 in current OSHA penalties, reduced from an initial assessment of $53,134 (a 38.9% reduction).
Does Latrobe Specialty Metals, LLC have any serious or willful violations?
Yes. Latrobe Specialty Metals, LLC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Latrobe Specialty Metals, LLC operate in?
Latrobe Specialty Metals, LLC operates in the Manufacturing sector (NAICS code 331110). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Latrobe Specialty Metals, LLC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Latrobe Specialty Metals, LLC ranks #9,454 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Latrobe Specialty Metals, LLC's safety record compare to industry average?
Latrobe Specialty Metals, LLC's total OSHA penalty of $32,439 is above the Manufacturing industry average of $15,763 per employer (2.1x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Conner Colorado, LLC in Denver, CO is a similar manufacturing employer with $32,440 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.