PlainWorker
Employers › MI

Manufacturing · Lapeer, MI

Lapeer Plating and Plastics INC

According to OSHA enforcement records (2010–2026), Lapeer Plating and Plastics INC ranks #3,801 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 45 violations across 19 inspections.

Top 5% by penalty56% serious
$61,300
OSHA penalties
45
Violations cited
19
OSHA inspections
#3,801
of 99,447 penalized employers

Lapeer Plating and Plastics INC in Lapeer, MI has been the subject of 19 OSHA workplace inspections and 45 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $61,300. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Lapeer Plating and Plastics INC 19 times over 10 years, roughly annually. These inspections resulted in 45 violations, averaging 2.4 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #3,801 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 25 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs far above peers (7.3x the sector average) on inspection frequency. For comparison, Schreiber Foods, INC. in Shippensburg, PA is another manufacturing employer with 3 OSHA inspections on record and $61,338 in current penalties.

2.4
violations per inspection
55.6%
of violations were serious
#3,801
of 99,447 penalized employers

Compliance score

D 56/100
  • D OSHA safety compliance: 45 violations across 19 OSHA inspections (2.4 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Lapeer Plating and Plastics INC runs well above peers (3.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$61,300 Bottom 4% least affordable more affordable than 4% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($61,300) is well above this band, the chart's rightmost open-ended bucket. This employer: $61,300 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Lapeer Plating and Plastics INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both17.918.41919.620.1064.2128.4192.6256.8OSHA inspectionsViolations citedFORD MOTOR COMPANY, OSHA inspections: 19 · Violations cited: 12AL LARSON BOAT SHOP, OSHA inspections: 19 · Violations cited: 29SWIFT PORK COMPANY, OSHA inspections: 19 · Violations cited: 17TITAN WHEEL CORPORAT…, OSHA inspections: 18 · Violations cited: 9PITMAN FARMS, OSHA inspections: 20 · Violations cited: 50CORE MOLDING TECHNOL…, OSHA inspections: 18 · Violations cited: 47SEABOARD FOODS, LLC, OSHA inspections: 18 · Violations cited: 67BWAY CORPORATION, OSHA inspections: 20 · Violations cited: 34TIMKENSTEEL CORPORAT…, OSHA inspections: 20 · Violations cited: 55MENARD, INC., OSHA inspections: 20 · Violations cited: 68WESTWARD SEAFOODS, I…, OSHA inspections: 18 · Violations cited: 73REPUBLIC STEEL, OSHA inspections: 20 · Violations cited: 139DAEHAN SOLUTION NEVA…, OSHA inspections: 18 · Violations cited: 131BRIDGESTONE AMERICAS…, OSHA inspections: 20 · Violations cited: 38KEYSTONE CONSOLIDATE…, OSHA inspections: 18 · Violations cited: 37FINCANTIERI MARINE G…, OSHA inspections: 18 · Violations cited: 52TRIUMPH FOODS, LLC, OSHA inspections: 18 · Violations cited: 14SEABOARD TRIUMPH FOODS, OSHA inspections: 20 · Violations cited: 39SINCLAIR WYOMING REF…, OSHA inspections: 20 · Violations cited: 245VIGOR MARINE, LLC, OSHA inspections: 18 · Violations cited: 52Lapeer Plating and P…, OSHA inspections: 19 · Violations cited: 45
Lapeer Plating and Plastics INC has 19 OSHA inspections on record and 45 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Lapeer Plating and Plastics INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Lapeer Plating and Plastics INC ranks #1,955 at $61,300 current penalty.

How Lapeer Plating and Plastics INC Compares

Lapeer Plating and Plastics INC's 2.37 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (3.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

19

First Inspection

2012-09-07

Last Inspection

2022-06-22

Inspection Span

10 yrs

Violations / Inspection

2.4

Avg Penalty / Inspection

$3,226

Industry Avg / Inspection

$6,093

What this shows 19 inspections over 10 years, averaging 2.4 violations per visit. That's $3,226 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

25

Serious

55.6% of total

0

Willful

0.0% of total

7

Repeat

15.6% of total

13

Other-Than-Serious

28.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$97,200

Current Penalty Amount

$61,300

Penalty Reduction

36.9%

What this shows Penalties were reduced by $35,900 from the initial assessment of $97,200. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Lapeer Plating and Plastics INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Lapeer Plating and Plastics INC Industry Avg
Inspections 19 2.6
Violations 45 8.0
Total Penalty $61,300 $15,763
Avg Penalty per Inspection $3,226 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Lapeer Plating and Plastics INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($61,300 here).

Schreiber Foods, INC. $61,338 PA Bo's Pallets, INC. $61,253 GA Aspen Products INC $61,251 MO Associated Milk Producers, INC. $61,350 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (19 inspections here).

Ford Motor Company 19 insp. Kansas City, MO AL Larson Boat Shop 19 insp. San Pedro, CA Swift Pork Company 19 insp. Beardstown, IL Titan Wheel Corporation of Illinois 18 insp. Quincy, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Roskam Baking CO DBA Rothbury Farms
Grand Rapids, MI
8 inspections $61,300
Schreiber Foods, INC.
Shippensburg, PA
3 inspections $61,338
Bo's Pallets, INC.
Adairsville, GA
8 inspections $61,253
Aspen Products INC
Kansas City, MO
17 inspections $61,251
Associated Milk Producers, INC.
Portage, WI
4 inspections $61,350

Compare Lapeer Plating and Plastics INC vs Roskam Baking CO DBA Rothbury Farms side-by-side →

What to do with this record

Use Lapeer Plating and Plastics INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Lapeer Plating and Plastics INC against Roskam Baking CO DBA Rothbury Farms, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Lapeer Plating and Plastics INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Lapeer Plating and Plastics INC safe to work at? ▼
Based on OSHA records, Lapeer Plating and Plastics INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 45 violations across 19 inspections, including 25 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Lapeer Plating and Plastics INC have? ▼
Lapeer Plating and Plastics INC has 45 OSHA violations on record, including 25 serious, 0 willful, and 7 repeat violations. The total current penalty amount is $61,300.
How many OSHA inspections has Lapeer Plating and Plastics INC had? ▼
Lapeer Plating and Plastics INC has had 19 OSHA inspections, with the first recorded on 2012-09-07 and the most recent on 2022-06-22. This averages 2.4 violations per inspection.
What is the total penalty amount for Lapeer Plating and Plastics INC? ▼
Lapeer Plating and Plastics INC has been assessed $61,300 in current OSHA penalties, reduced from an initial assessment of $97,200 (a 36.9% reduction).
Does Lapeer Plating and Plastics INC have any serious or willful violations? ▼
Yes. Lapeer Plating and Plastics INC has 25 serious violations, and 7 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Lapeer Plating and Plastics INC operate in? ▼
Lapeer Plating and Plastics INC operates in the Manufacturing sector (NAICS code 332813). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Lapeer Plating and Plastics INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Lapeer Plating and Plastics INC ranks #3,801 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Lapeer Plating and Plastics INC's safety record compare to industry average? ▼
Lapeer Plating and Plastics INC's total OSHA penalty of $61,300 is above the Manufacturing industry average of $15,763 per employer (3.9x the average). The employer has 19 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Schreiber Foods, INC. in Shippensburg, PA is a similar manufacturing employer with $61,338 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 19 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.