Manufacturing · Amityville, NY

Lambro Industries, INC.

According to OSHA enforcement records (2010–2026), Lambro Industries, INC. ranks #17,842 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 11 violations across 2 inspections.

Top 25% by penalty91% serious
$19,750
OSHA penalties
11
Violations cited
2
OSHA inspections
#17,842
of 99,447 penalized employers

Lambro Industries, INC. in Amityville, NY has been the subject of 2 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $19,750. Separately, the Department of Labor's Wage and Hour Division found $0 in back wages owed to an undisclosed number of workers. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Lambro Industries, INC. 2 times over 3 years, roughly once every couple of years. These inspections resulted in 11 violations, averaging 5.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #17,842 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 10 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $0 in back wages owed to an undisclosed number of workers. For comparison, H & L Tool Company INC in Madison Heights, MI is another manufacturing employer with 3 OSHA inspections on record and $19,750 in current penalties.

5.5
violations per inspection
90.9%
of violations were serious
#17,842
of 99,447 penalized employers
$0
in back wages recovered

Compliance score

D 51/100
  • F OSHA safety compliance: 11 violations across 2 OSHA inspections (5.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
  • A Wage & hour compliance: $0 in back wages owed across 1 WHD case ($0 per case), vs. national p10 $2K (best) / p90 $58K (worst) among 91,622 employers with a WHD case on file.
Open my watchlist

How Lambro Industries, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Lambro Industries, INC. runs moderately above peers (1.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$19,750 Bottom 18% least affordable more affordable than 18% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Lambro Industries, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.04.513.021.530.038.5OSHA inspectionsViolations citedFIRST MARINE, LLC, A…, OSHA inspections: 2 · Violations cited: 35SOUTH MARINE SYSTEMS…, OSHA inspections: 2 · Violations cited: 20WOODGRAIN MILLWORK, …, OSHA inspections: 2 · Violations cited: 9GREAT DANE - WAYNE P…, OSHA inspections: 2 · Violations cited: 18TWINCRAFT INC., OSHA inspections: 2 · Violations cited: 13ANDOVER HEALTHCARE, …, OSHA inspections: 2 · Violations cited: 14DELEK REFINING, LTD, OSHA inspections: 2 · Violations cited: 8HOLLYFRONTIER ELDORA…, OSHA inspections: 2 · Violations cited: 6CHERRY CRUSHED CONCR…, OSHA inspections: 2 · Violations cited: 10PIONEER TOOL & DIE CO., OSHA inspections: 2 · Violations cited: 13EVERLASTING SURFACES…, OSHA inspections: 2 · Violations cited: 18BAUER, INC., OSHA inspections: 2 · Violations cited: 24CASSANO MARBLE INC., OSHA inspections: 2 · Violations cited: 15OWENS-BROCKWAY GLASS…, OSHA inspections: 2 · Violations cited: 7TRACHTE SOUTHEAST LLC, OSHA inspections: 2 · Violations cited: 28FCA LLC, OSHA inspections: 2 · Violations cited: 8POLYCHEM OMS SYSTEMS…, OSHA inspections: 2 · Violations cited: 37SMURFIT STONE RECYCL…, OSHA inspections: 2 · Violations cited: 22PROTEIN FOR PETS OPC…, OSHA inspections: 2 · Violations cited: 18BECKER WORKS, LTD., OSHA inspections: 2 · Violations cited: 26Lambro Industries, I…, OSHA inspections: 2 · Violations cited: 11
Lambro Industries, INC. has 2 OSHA inspections on record and 11 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Lambro Industries, INC. in the Manufacturing enforcement ledger

In Manufacturing, Lambro Industries, INC. sits at penalty rank #8,633 of 35,243 penalized establishments ($19,750 assessed).

Combined federal exposure here: $19,750 OSHA penalties plus $0 WHD back wages (0.0% of the combined total is wage recovery).

How Lambro Industries, INC. Compares

Lambro Industries, INC.'s 5.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-10-28

Last Inspection

2018-08-21

Inspection Span

3 yrs

Violations / Inspection

5.5

Avg Penalty / Inspection

$9,875

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 5.5 violations per visit. That's $9,875 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

10

Serious

90.9% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

9.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$32,300

Current Penalty Amount

$19,750

Penalty Reduction

38.9%

Combined Impact (OSHA + WHD)

$19,750

What this shows Penalties were reduced by $12,550 from the initial assessment of $32,300. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$0
Employees Affected
0
WHD Violations
0

Industry Safety Context: Manufacturing

How Lambro Industries, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Lambro Industries, INC. Industry Avg
Inspections 2 2.6
Violations 11 8.0
Total Penalty $19,750 $15,763
Avg Penalty per Inspection $9,875 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Lambro Industries, INC., both outside NY so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Lambro Industries, INC. vs H & L Tool Company INC side-by-side →

What to do with this record

Use Lambro Industries, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Lambro Industries, INC. against H & L Tool Company INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Lambro Industries, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Lambro Industries, INC. also carries $0 in Wage and Hour Division back-wages, a separate enforcement track from OSHA safety violations. How wage-theft enforcement works

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Lambro Industries, INC. safe to work at?
Based on OSHA records, Lambro Industries, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 11 violations across 2 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Lambro Industries, INC. have?
Lambro Industries, INC. has 11 OSHA violations on record, including 10 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $19,750.
How many OSHA inspections has Lambro Industries, INC. had?
Lambro Industries, INC. has had 2 OSHA inspections, with the first recorded on 2015-10-28 and the most recent on 2018-08-21. This averages 5.5 violations per inspection.
What is the total penalty amount for Lambro Industries, INC.?
Lambro Industries, INC. has been assessed $19,750 in current OSHA penalties, reduced from an initial assessment of $32,300 (a 38.9% reduction). Additionally, $0 in back wages were owed through WHD enforcement.
Does Lambro Industries, INC. have any serious or willful violations?
Yes. Lambro Industries, INC. has 10 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
Has Lambro Industries, INC. been cited for wage theft?
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Lambro Industries, INC., resulting in $0 in back wages owed to an undisclosed number of workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Lambro Industries, INC. operate in?
Lambro Industries, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
What should I do if Lambro Industries, INC. owes me wages?
If you believe Lambro Industries, INC. owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $0 in back wages owed by this employer across 1 case.
Where does Lambro Industries, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Lambro Industries, INC. ranks #17,842 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Lambro Industries, INC.'s safety record compare to industry average?
Lambro Industries, INC.'s total OSHA penalty of $19,750 is above the Manufacturing industry average of $15,763 per employer (1.3x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, H & L Tool Company INC in Madison Heights, MI is a similar manufacturing employer with $19,750 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.