PlainWorker
Employers › CT

Manufacturing · Plainville, CT

Hygrade Precision Technologies, INC.

According to OSHA enforcement records (2010–2026), Hygrade Precision Technologies, INC. ranks #38,929 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 2 inspections.

Upper half by penalty92% serious
$8,761
OSHA penalties
12
Violations cited
2
OSHA inspections
#38,929
of 99,447 penalized employers

Hygrade Precision Technologies, INC. in Plainville, CT has been the subject of 2 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,761. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Hygrade Precision Technologies, INC. 2 times over 4 years, roughly once every couple of years. These inspections resulted in 12 violations, averaging 6.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #38,929 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 11 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, B & G Equipment Company in Jackson, GA is another manufacturing employer with 3 OSHA inspections on record and $8,760 in current penalties.

6.0
violations per inspection
91.7%
of violations were serious
#38,929
of 99,447 penalized employers

Compliance score

F 3/100
  • F OSHA safety compliance: 12 violations across 2 OSHA inspections (6.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Hygrade Precision Technologies, INC. runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,761 Bottom 39% least affordable more affordable than 39% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Hygrade Precision Technologies, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.02.012.823.534.245.0OSHA inspectionsViolations citedPILGRIM'S PRIDE CORP…, OSHA inspections: 2 · Violations cited: 14DYNAMIC ENGINEERING,…, OSHA inspections: 2 · Violations cited: 11PARMA ACQUISITION CO…, OSHA inspections: 2 · Violations cited: 40COMMERCIAL SHEET MET…, OSHA inspections: 2 · Violations cited: 12JENSEN ENTERPRISES I…, OSHA inspections: 2 · Violations cited: 4SAVENCIA CHEESE USA,…, OSHA inspections: 2 · Violations cited: 9FLUVITEX USA, INC., OSHA inspections: 2 · Violations cited: 9LANDES FOODS, LLC, OSHA inspections: 2 · Violations cited: 6SEMPER CONCRETE (CMS…, OSHA inspections: 2 · Violations cited: 32HAWK RESEARCH LABORA…, OSHA inspections: 2 · Violations cited: 12GANNETT CO., OSHA inspections: 2 · Violations cited: 11MAREL STORK POULTRY …, OSHA inspections: 2 · Violations cited: 15PROGRESSIVE, INC., OSHA inspections: 2 · Violations cited: 20ANCHOR-HARVEY COMPON…, OSHA inspections: 2 · Violations cited: 6VACUUM CERAMICS, INC., OSHA inspections: 2 · Violations cited: 27GRIFFIN PIPE PRODUCT…, OSHA inspections: 2 · Violations cited: 43THE TERRILL MANUFACT…, OSHA inspections: 2 · Violations cited: 27FORM-A-FEED INC., OSHA inspections: 2 · Violations cited: 5AREVALO TORTILLERIA,…, OSHA inspections: 2 · Violations cited: 10FACULTATIEVE TECHNOL…, OSHA inspections: 2 · Violations cited: 14Hygrade Precision Te…, OSHA inspections: 2 · Violations cited: 12
Hygrade Precision Technologies, INC. has 2 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Hygrade Precision Technologies, INC. in the Manufacturing enforcement ledger

In Manufacturing, Hygrade Precision Technologies, INC. sits at penalty rank #17,298 of 35,243 penalized establishments ($8,761 assessed).

How Hygrade Precision Technologies, INC. Compares

Hygrade Precision Technologies, INC.'s 6.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-10-24

Last Inspection

2017-06-13

Inspection Span

4 yrs

Violations / Inspection

6.0

Avg Penalty / Inspection

$4,381

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 4 years, averaging 6.0 violations per visit. That's $4,381 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

11

Serious

91.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

8.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$19,899

Current Penalty Amount

$8,761

Penalty Reduction

56.0%

What this shows Penalties were reduced by $11,138 from the initial assessment of $19,899. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Hygrade Precision Technologies, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Hygrade Precision Technologies, INC. Industry Avg
Inspections 2 2.6
Violations 12 8.0
Total Penalty $8,761 $15,763
Avg Penalty per Inspection $4,381 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Hygrade Precision Technologies, INC., both outside CT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,761 here).

Lee Kum Kee $8,760 CA Browder Veneer Works, INC $8,760 AL Intrapack Industries, INC. $8,760 TX B & G Equipment Company $8,760 GA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Pilgrim's Pride Corporation 2 insp. DE Queen, AR Dynamic Engineering, INC. 2 insp. Watertown, SD Parma Acquisition CORP. 2 insp. Indianapolis, IN Commercial Sheet Metal Works INC 2 insp. Los Angeles, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Lee Kum Kee
City of Industry, CA
2 inspections $8,760
Browder Veneer Works, INC
Montgomery, AL
2 inspections $8,760
Intrapack Industries, INC.
Dallas, TX
2 inspections $8,760
B & G Equipment Company
Jackson, GA
3 inspections $8,760
KLB Industries, INC.
Bellefontaine, OH
2 inspections $8,760

Compare Hygrade Precision Technologies, INC. vs Lee Kum Kee side-by-side →

What to do with this record

Use Hygrade Precision Technologies, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Hygrade Precision Technologies, INC. against Lee Kum Kee, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Hygrade Precision Technologies, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Hygrade Precision Technologies, INC. safe to work at? ▼
Based on OSHA records, Hygrade Precision Technologies, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 2 inspections, including 11 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Hygrade Precision Technologies, INC. have? ▼
Hygrade Precision Technologies, INC. has 12 OSHA violations on record, including 11 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,761.
How many OSHA inspections has Hygrade Precision Technologies, INC. had? ▼
Hygrade Precision Technologies, INC. has had 2 OSHA inspections, with the first recorded on 2013-10-24 and the most recent on 2017-06-13. This averages 6.0 violations per inspection.
What is the total penalty amount for Hygrade Precision Technologies, INC.? ▼
Hygrade Precision Technologies, INC. has been assessed $8,761 in current OSHA penalties, reduced from an initial assessment of $19,899 (a 56.0% reduction).
Does Hygrade Precision Technologies, INC. have any serious or willful violations? ▼
Yes. Hygrade Precision Technologies, INC. has 11 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Hygrade Precision Technologies, INC. operate in? ▼
Hygrade Precision Technologies, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Hygrade Precision Technologies, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Hygrade Precision Technologies, INC. ranks #38,929 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Hygrade Precision Technologies, INC.'s safety record compare to industry average? ▼
Hygrade Precision Technologies, INC.'s total OSHA penalty of $8,761 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, B & G Equipment Company in Jackson, GA is a similar manufacturing employer with $8,760 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.