PlainWorker
Employers › GA

Manufacturing · Newnan, GA

Global Powertrain Systems, LLC

According to OSHA enforcement records (2010–2026), Global Powertrain Systems, LLC ranks #60,288 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 2 inspections.

Lower half by penalty40% serious
$4,200
OSHA penalties
5
Violations cited
2
OSHA inspections
#60,288
of 99,447 penalized employers

Global Powertrain Systems, LLC in Newnan, GA has been the subject of 2 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,200. Separately, the Department of Labor's Wage and Hour Division found $0 in back wages owed to an undisclosed number of workers. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Global Powertrain Systems, LLC 2 times over 3 years, roughly once every couple of years. These inspections resulted in 5 violations, averaging 2.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #60,288 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $0 in back wages owed to an undisclosed number of workers. For comparison, Schneider Electric USA, INC in Smyrna, TN is another manufacturing employer with 2 OSHA inspections on record and $4,200 in current penalties.

2.5
violations per inspection
40.0%
of violations were serious
#60,288
of 99,447 penalized employers
$0
in back wages recovered

Compliance score

C 73/100
  • D OSHA safety compliance: 5 violations across 2 OSHA inspections (2.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
  • A Wage & hour compliance: $0 in back wages owed across 1 WHD case ($0 per case), vs. national p10 $2K (best) / p90 $58K (worst) among 91,622 employers with a WHD case on file.
Open my watchlist

How Global Powertrain Systems, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Global Powertrain Systems, LLC runs well below peers (0.27x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,200 Top 39% most affordable more affordable than 61% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Global Powertrain Systems, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0010.521.031.542.0OSHA inspectionsViolations citedMDLG, INC. DBA PHENI…, OSHA inspections: 2 · Violations cited: 30W.D. TOWNLEY AND SON…, OSHA inspections: 2 · Violations cited: 14ROYAL OAK ENTERPRISE…, OSHA inspections: 2 · Violations cited: 12CORPUS CHRISTI GASKE…, OSHA inspections: 2 · Violations cited: 6PHILADELPHIA MACARON…, OSHA inspections: 2 · Violations cited: 15COMM STEEL INC., OSHA inspections: 2 · Violations cited: 27SALSBURY INDUSTRIES,…, OSHA inspections: 2 · Violations cited: 8UNVERFERTH MANUFACTU…, OSHA inspections: 2 · Violations cited: 18IGLOO PRODUCTS CORPO…, OSHA inspections: 2 · Violations cited: 8VERSO LUKE LLC, OSHA inspections: 2 · Violations cited: 6PERKINS & MARIE CALL…, OSHA inspections: 2 · Violations cited: 1EXXONMOBIL BAYTOWN R…, OSHA inspections: 2 · Violations cited: 7GERDAU MACSTEEL JACK…, OSHA inspections: 2 · Violations cited: 40FEMCO, INC., OSHA inspections: 2 · Violations cited: 16CHURCH & DWIGHT, OSHA inspections: 2 · Violations cited: 6KANSAS CITY SAUSAGE …, OSHA inspections: 2 · Violations cited: 3NEW FLYER OF AMERICA…, OSHA inspections: 2 · Violations cited: 10COCA COLA CONSOLIDATED, OSHA inspections: 2 · Violations cited: 6STONE CRAFTER GRANIT…, OSHA inspections: 2 · Violations cited: 20ABC COATING COMPANY …, OSHA inspections: 2 · Violations cited: 5Global Powertrain Sy…, OSHA inspections: 2 · Violations cited: 5
Global Powertrain Systems, LLC has 2 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Global Powertrain Systems, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Global Powertrain Systems, LLC ranks #24,636 at $4,200 current penalty.

Combined federal exposure here: $4,200 OSHA penalties plus $0 WHD back wages (0.0% of the combined total is wage recovery).

How Global Powertrain Systems, LLC Compares

Global Powertrain Systems, LLC's 2.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.27x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-08-06

Last Inspection

2016-08-17

Inspection Span

3 yrs

Violations / Inspection

2.5

Avg Penalty / Inspection

$2,100

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 2.5 violations per visit. That's $2,100 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

40.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

60.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,000

Current Penalty Amount

$4,200

Penalty Reduction

40.0%

Combined Impact (OSHA + WHD)

$4,200

What this shows Penalties were reduced by $2,800 from the initial assessment of $7,000. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$0
Employees Affected
0
WHD Violations
1

Industry Safety Context: Manufacturing

How Global Powertrain Systems, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Global Powertrain Systems, LLC Industry Avg
Inspections 2 2.6
Violations 5 8.0
Total Penalty $4,200 $15,763
Avg Penalty per Inspection $2,100 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Global Powertrain Systems, LLC, both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($4,200 here).

Lake Shore Burial Vault CO., INC. $4,200 WI Eastcoast Centerless Grinding, LLC $4,200 CT W.R. Case & Sons Cutlery Company $4,200 PA Mayekawa USA $4,200 TN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

MDLG, INC. DBA Phenix Lumber CO. & John M. Dudley 2 insp. Phenix City, AL W.D. Townley and Son Lumber Company, INC. 2 insp. Henderson, TX Royal Oak Enterprises LLC 2 insp. Summersville, MO Corpus Christi Gasket & Fastener, INC. 2 insp. Corpus Christi, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

W.R. Case & Sons Cutlery Company
Bradford, PA
2 inspections $4,200
Sigma Fasteners, INC.
Houston, TX
2 inspections $4,200
Novolex Holdings, LLC
Turlock, CA
2 inspections $4,200
Dunn MFG
Monroe, NC
0 inspections $0
Schneider Electric USA, INC
Smyrna, TN
2 inspections $4,200

Compare Global Powertrain Systems, LLC vs W.R. Case & Sons Cutlery Company side-by-side →

What to do with this record

Use Global Powertrain Systems, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Global Powertrain Systems, LLC against W.R. Case & Sons Cutlery Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Global Powertrain Systems, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Global Powertrain Systems, LLC also carries $0 in Wage and Hour Division back-wages, a separate enforcement track from OSHA safety violations. How wage-theft enforcement works

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Global Powertrain Systems, LLC safe to work at? ▼
Based on OSHA records, Global Powertrain Systems, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Global Powertrain Systems, LLC have? ▼
Global Powertrain Systems, LLC has 5 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $4,200.
How many OSHA inspections has Global Powertrain Systems, LLC had? ▼
Global Powertrain Systems, LLC has had 2 OSHA inspections, with the first recorded on 2013-08-06 and the most recent on 2016-08-17. This averages 2.5 violations per inspection.
What is the total penalty amount for Global Powertrain Systems, LLC? ▼
Global Powertrain Systems, LLC has been assessed $4,200 in current OSHA penalties, reduced from an initial assessment of $7,000 (a 40.0% reduction). Additionally, $0 in back wages were owed through WHD enforcement.
Does Global Powertrain Systems, LLC have any serious or willful violations? ▼
Yes. Global Powertrain Systems, LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
Has Global Powertrain Systems, LLC been cited for wage theft? ▼
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Global Powertrain Systems, LLC, resulting in $0 in back wages owed to an undisclosed number of workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Global Powertrain Systems, LLC operate in? ▼
Global Powertrain Systems, LLC operates in the Manufacturing sector (NAICS code 336350). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
What should I do if Global Powertrain Systems, LLC owes me wages? ▼
If you believe Global Powertrain Systems, LLC owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $0 in back wages owed by this employer across 1 case.
Where does Global Powertrain Systems, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Global Powertrain Systems, LLC ranks #60,288 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Global Powertrain Systems, LLC's safety record compare to industry average? ▼
Global Powertrain Systems, LLC's total OSHA penalty of $4,200 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Schneider Electric USA, INC in Smyrna, TN is a similar manufacturing employer with $4,200 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.