Manufacturing · Cedar Springs, GA

Georgia-Pacific Cedar Springs LLC

According to OSHA enforcement records (2010–2026), Georgia-Pacific Cedar Springs LLC ranks #2,722 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 17 violations across 4 inspections.

Top 5% by penalty76% serious

Compiled by Plainworker · September 6, 2026

$76,270
OSHA penalties: 17
Violations cited: 4
OSHA inspections: #2,722
of 99,447 penalized employers

Georgia-Pacific Cedar Springs LLC in Cedar Springs, GA has been the subject of 4 OSHA workplace inspections and 17 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $76,270. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Georgia-Pacific Cedar Springs LLC 4 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 17 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #2,722 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Touchstone Precision Inc. in Auburn, AL is another manufacturing employer with 4 OSHA inspections on record and $7,956 in current penalties.

4.3
violations per inspection: 76.5%
of violations were serious: #2,722
of 99,447 penalized employers

Compliance score

F 28/100

F OSHA safety compliance: 17 violations across 4 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Georgia-Pacific Cedar …

$76,270
Manufacturing avg

$15,763

What this shows Georgia-Pacific Cedar Springs LLC runs well above peers (4.8x the sector average) in total OSHA penalties.

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$76,270 Bottom 3% least affordable more affordable than 3% of 99,447 U.S. employers with a penalty

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Georgia-Pacific Cedar Springs LLC.

Georgia-Pacific Cedar Springs LLC has 4 OSHA inspections on record and 17 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Georgia-Pacific Cedar Springs LLC in the Manufacturing enforcement ledger

In Manufacturing, Georgia-Pacific Cedar Springs LLC sits at penalty rank #1,414 of 35,243 penalized establishments ($76,270 assessed).

How Georgia-Pacific Cedar Springs LLC Compares

Georgia-Pacific Cedar Springs LLC's 4.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (4.8x the sector average).

Total Inspections

First Inspection

2014-07-25

Last Inspection

2023-08-22

Inspection Span

9 yrs

Violations / Inspection

4.3

Avg Penalty / Inspection

$19,068

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 9 years, averaging 4.3 violations per visit. That's $19,068 per inspection vs. the Manufacturing average of $6,093.

Serious

76.5% of total

Willful

0.0% of total

Repeat

17.6% of total

Other-Than-Serious

5.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Initial Penalty Assessed

$84,539

Current Penalty Amount

$76,270

Penalty Reduction

9.8%

What this shows Penalties were reduced by $8,269 from the initial assessment of $84,539. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Georgia-Pacific Cedar Springs LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric	Georgia-Pacific Cedar Springs LLC	Industry Avg
Inspections	4	2.6
Violations	17	8.0
Total Penalty	$76,270	$15,763
Avg Penalty per Inspection	$19,068	$6,093

View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Georgia-Pacific Cedar Springs LLC, both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($76,270 here).

Cuming Corporation $76,299 MA Hercules International, INC. $76,231 WV Superior Plastics Extrusion Company, INC. $76,220 CT Genpak, LLC $76,361 AL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

US Magnesium LLC 4 insp. Grantsville, UT Fraser Shipyards, INC. 4 insp. Superior, WI Dukane Precast Incorporated 4 insp. Aurora, IL Harbor Point Mineral Products INC. 4 insp. Utica, NY

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Touchstone Precision Inc.

9 inspections $76,299

Hercules International, INC.

Huntington, WV

5 inspections $76,231

Superior Plastics Extrusion Company, INC.

Putnam, CT

6 inspections $76,220

Compare Georgia-Pacific Cedar Springs LLC vs Touchstone Precision Inc. side-by-side →

What to do with this record

Use Georgia-Pacific Cedar Springs LLC's enforcement history as one data point, not the whole picture.

A single employer's record can look unusual in isolation. Compare Georgia-Pacific Cedar Springs LLC against Touchstone Precision Inc., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
See whether Georgia-Pacific Cedar Springs LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Georgia-Pacific Cedar Springs LLC safe to work at? ▼

Based on OSHA records, Georgia-Pacific Cedar Springs LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 17 violations across 4 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.

How many OSHA violations does Georgia-Pacific Cedar Springs LLC have? ▼

Georgia-Pacific Cedar Springs LLC has 17 OSHA violations on record, including 13 serious, 0 willful, and 3 repeat violations. The total current penalty amount is $76,270.

How many OSHA inspections has Georgia-Pacific Cedar Springs LLC had? ▼

Georgia-Pacific Cedar Springs LLC has had 4 OSHA inspections, with the first recorded on 2014-07-25 and the most recent on 2023-08-22. This averages 4.3 violations per inspection.

What is the total penalty amount for Georgia-Pacific Cedar Springs LLC? ▼

Georgia-Pacific Cedar Springs LLC has been assessed $76,270 in current OSHA penalties, reduced from an initial assessment of $84,539 (a 9.8% reduction).

Does Georgia-Pacific Cedar Springs LLC have any serious or willful violations? ▼

Yes. Georgia-Pacific Cedar Springs LLC has 13 serious violations, and 3 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

What industry does Georgia-Pacific Cedar Springs LLC operate in? ▼

Georgia-Pacific Cedar Springs LLC operates in the Manufacturing sector (NAICS code 322130). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.

Where does Georgia-Pacific Cedar Springs LLC rank nationally on OSHA penalties? ▼

Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Georgia-Pacific Cedar Springs LLC ranks #2,722 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.

How does Georgia-Pacific Cedar Springs LLC's safety record compare to industry average? ▼

Georgia-Pacific Cedar Springs LLC's total OSHA penalty of $76,270 is above the Manufacturing industry average of $15,763 per employer (4.8x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Touchstone Precision Inc. in Auburn, AL is a similar manufacturing employer with $7,956 in current penalties.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.