PlainWorker
Employers › GA

Manufacturing · McDonough, GA

Fortune Metal of Georgia, LLC

According to OSHA enforcement records (2010–2026), Fortune Metal of Georgia, LLC ranks #22,705 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 3 inspections.

Top 25% by penalty100% serious
$15,856
OSHA penalties
5
Violations cited
3
OSHA inspections
#22,705
of 99,447 penalized employers

Fortune Metal of Georgia, LLC in McDonough, GA has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $15,856. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Fortune Metal of Georgia, LLC 3 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 5 violations, averaging 1.7 per inspection. According to OSHA enforcement records, its total current penalty ranks #22,705 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Michigan Box Company in Detroit, MI is another manufacturing employer with 3 OSHA inspections on record and $15,860 in current penalties.

1.7
violations per inspection
100.0%
of violations were serious
#22,705
of 99,447 penalized employers

Compliance score

C 66/100
  • C OSHA safety compliance: 5 violations across 3 OSHA inspections (1.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Fortune Metal of Georgia, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Fortune Metal of Georgia, LLC sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$15,856 Bottom 23% least affordable more affordable than 23% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Fortune Metal of Georgia, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0015.530.946.461.9OSHA inspectionsViolations citedMAPLEGROVE GLUTEN FR…, OSHA inspections: 3 · Violations cited: 52HEIDELBERG MATERIALS…, OSHA inspections: 3 · Violations cited: 16SWISS AMERICAN CDMO …, OSHA inspections: 3 · Violations cited: 9CORBITT MANUFACTURIN…, OSHA inspections: 3 · Violations cited: 21FULLER INDUSTRIES, I…, OSHA inspections: 3 · Violations cited: 7AA FOUNDRIES, INC., OSHA inspections: 3 · Violations cited: 59DEB EL FOOD PRODUCTS…, OSHA inspections: 3 · Violations cited: 27MAGIC PLASTICS, INC., OSHA inspections: 3 · Violations cited: 14GRADALL INDUSTRIES, …, OSHA inspections: 3 · Violations cited: 9SCHWABE NORTH AMERIC…, OSHA inspections: 3 · Violations cited: 10CLAREMONT FOODS, LLC, OSHA inspections: 3 · Violations cited: 9WINPAK HEAT SEAL COR…, OSHA inspections: 3 · Violations cited: 6PACTIV LLC, OSHA inspections: 3 · Violations cited: 4BLUE BELL CREAMERIES…, OSHA inspections: 3 · Violations cited: 10FARLEY'S & SATHERS C…, OSHA inspections: 3 · Violations cited: 15INTERPRINT, INC., OSHA inspections: 3 · Violations cited: 2TH FOODS, INC., OSHA inspections: 3 · Violations cited: 7CABOT COACH BUILDERS…, OSHA inspections: 3 · Violations cited: 20HOLLINGSWORTH & VOSE…, OSHA inspections: 3 · Violations cited: 4SPITZER INDUSTRIES, …, OSHA inspections: 3 · Violations cited: 3Fortune Metal of Geo…, OSHA inspections: 3 · Violations cited: 5
Fortune Metal of Georgia, LLC has 3 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Fortune Metal of Georgia, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Fortune Metal of Georgia, LLC ranks #10,787 at $15,856 current penalty.

How Fortune Metal of Georgia, LLC Compares

Fortune Metal of Georgia, LLC's 1.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2016-01-26

Last Inspection

2026-06-12

Inspection Span

10 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$5,285

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 10 years, averaging 1.7 violations per visit. That's $5,285 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$25,510

Current Penalty Amount

$15,856

Penalty Reduction

37.8%

What this shows Penalties were reduced by $9,654 from the initial assessment of $25,510. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Fortune Metal of Georgia, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Fortune Metal of Georgia, LLC Industry Avg
Inspections 3 2.6
Violations 5 8.0
Total Penalty $15,856 $15,763
Avg Penalty per Inspection $5,285 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Fortune Metal of Georgia, LLC, both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($15,856 here).

Innovative Resin Systems $15,855 NJ McWilliams Forge CO., INC. $15,858 NJ Soundwich INC $15,853 OH Michigan Box Company $15,860 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Maplegrove Gluten Free Foods MFG INC 3 insp. Chino, CA Heidelberg Materials US Cement, LLC 3 insp. Middlebranch, OH Swiss American Cdmo LLC 3 insp. Carrollton, TX Corbitt Manufacturing Company 3 insp. Paragould, AR

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Innovative Resin Systems
Newark, NJ
2 inspections $15,855
McWilliams Forge CO., INC.
Rockaway, NJ
2 inspections $15,858
Soundwich INC
Cleveland, OH
2 inspections $15,853
Michigan Box Company
Detroit, MI
3 inspections $15,860
Pella Corporation
Vassalboro, ME
2 inspections $15,852

Compare Fortune Metal of Georgia, LLC vs Innovative Resin Systems side-by-side →

What to do with this record

Use Fortune Metal of Georgia, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Fortune Metal of Georgia, LLC against Innovative Resin Systems, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Fortune Metal of Georgia, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Fortune Metal of Georgia, LLC safe to work at? ▼
Based on OSHA records, Fortune Metal of Georgia, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Fortune Metal of Georgia, LLC have? ▼
Fortune Metal of Georgia, LLC has 5 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $15,856.
How many OSHA inspections has Fortune Metal of Georgia, LLC had? ▼
Fortune Metal of Georgia, LLC has had 3 OSHA inspections, with the first recorded on 2016-01-26 and the most recent on 2026-06-12. This averages 1.7 violations per inspection.
What is the total penalty amount for Fortune Metal of Georgia, LLC? ▼
Fortune Metal of Georgia, LLC has been assessed $15,856 in current OSHA penalties, reduced from an initial assessment of $25,510 (a 37.8% reduction).
Does Fortune Metal of Georgia, LLC have any serious or willful violations? ▼
Yes. Fortune Metal of Georgia, LLC has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Fortune Metal of Georgia, LLC operate in? ▼
Fortune Metal of Georgia, LLC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Fortune Metal of Georgia, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Fortune Metal of Georgia, LLC ranks #22,705 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Fortune Metal of Georgia, LLC's safety record compare to industry average? ▼
Fortune Metal of Georgia, LLC's total OSHA penalty of $15,856 is above the Manufacturing industry average of $15,763 per employer (1.0x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Michigan Box Company in Detroit, MI is a similar manufacturing employer with $15,860 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.