PlainWorker
Employers › TX

Manufacturing · POINT COMFORT, TX

FORMOSA PLASTICS CORPORATION, TEXAS

OSHA records show a mixed safety record: 49 violations across 22 inspections — above the Manufacturing industry average for penalties.

22
OSHA inspections
49
Violations cited
$167,439
OSHA penalties

FORMOSA PLASTICS CORPORATION, TEXAS in POINT COMFORT, TX has been the subject of 22 OSHA workplace inspections and 49 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $167,439. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

FORMOSA PLASTICS CORPORATION, TEXAS has been inspected 22 times by OSHA over 15 years. These inspections resulted in 49 violations, averaging 2.2 violations per inspection. Of these, 29 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, FORMOSA PLASTICS CORPORATION, TEXAS has been inspected more frequently.

2.2
violations per inspection
59.2%
of violations were serious
10.3×
Manufacturing industry-avg penalty

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows FORMOSA PLASTICS CORPORATION, TEXAS carries 10.3× the penalties of a typical Manufacturing employer — a clear outlier in its sector.

Source U.S. Department of Labor — OSHA enforcement extracts As of 2026

What the Data Says About FORMOSA PLASTICS CORPORATION, TEXAS

The federal enforcement record for FORMOSA PLASTICS CORPORATION, TEXAS in POINT COMFORT, TX includes 22 OSHA inspections and 49 violations, translating to 2.23 violations per inspection. Of those violations, 29 (59.2%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $298,397 in initial penalties against this employer, later adjusted to a current total of $167,439 — a 43.9% reduction. Average penalty per inspection works out to $7,611. Against the Manufacturing industry average of $16,300 per employer, this record runs above peers.

Inspection activity spans from 2010-05-20 to 2025-01-08, a window of roughly 15 years. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
22
First Inspection
2010-05-20
Last Inspection
2025-01-08
Inspection Span
15 years
Violations per Inspection
2.2
Avg Penalty per Inspection
$7,611
Industry Avg per Inspection
$6,447

Violation Breakdown

29
Serious
59.2% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
20
Other-Than-Serious
40.8% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$298,397
Current Penalty Amount
$167,439
Penalty Reduction
43.9%

Penalties were reduced by $130,958 from the initial assessment of $298,397. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How FORMOSA PLASTICS CORPORATION, TEXAS compares to the Manufacturing sector, which has 14,000 employers tracked by PlainWorker.

Metric FORMOSA PLASTICS CORPORATION, TEXAS Industry Avg
Inspections 22 2.5
Violations 49 8.0
Total Penalty $167,439 $16,300
Avg Penalty per Inspection $7,611 $6,447
View all 14,000 employers in Manufacturing →

Explore related data

Manufacturing safety record →

Inspections, violations, and penalties across the Manufacturing sector.
TX enforcement →

Top violators and statewide OSHA & WHD totals for TX.
Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process
How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes
Your Rights Under OSHA

Know your workplace safety rights and how to exercise them
Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages
Most Dangerous Industries

Which industries face the highest rates of violations and penalties
Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Manufacturing

MDLG, INC.
PHENIX CITY, AL
9 inspections $2.71M
THE GOODYEAR TIRE & RUBBER COMPANY
DANVILLE, VA
31 inspections $2.62M
Romark Laboratories
TAMPA, FL
0 inspections $0
NOX US, LLC
FOSTORIA, OH
10 inspections $1.54M
FLORENCE HARDWOODS, LLC
FLORENCE, WI
5 inspections $1.42M

Compare FORMOSA PLASTICS CORPORATION, TEXAS vs MDLG, INC. side-by-side →

Frequently Asked Questions

Is FORMOSA PLASTICS CORPORATION, TEXAS safe to work at? ▼
Based on OSHA records, FORMOSA PLASTICS CORPORATION, TEXAS's workplace safety record is mixed, with some compliance concerns. The employer has 49 violations across 22 inspections, including 29 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does FORMOSA PLASTICS CORPORATION, TEXAS have? ▼
FORMOSA PLASTICS CORPORATION, TEXAS has 49 OSHA violations on record, including 29 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $167,439.
How many OSHA inspections has FORMOSA PLASTICS CORPORATION, TEXAS had? ▼
FORMOSA PLASTICS CORPORATION, TEXAS has had 22 OSHA inspections, with the first recorded on 2010-05-20 and the most recent on 2025-01-08. This averages 2.2 violations per inspection.
What is the total penalty amount for FORMOSA PLASTICS CORPORATION, TEXAS? ▼
FORMOSA PLASTICS CORPORATION, TEXAS has been assessed $167,439 in current OSHA penalties, reduced from an initial assessment of $298,397 (a 43.9% reduction).
Does FORMOSA PLASTICS CORPORATION, TEXAS have any serious or willful violations? ▼
Yes. FORMOSA PLASTICS CORPORATION, TEXAS has 29 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does FORMOSA PLASTICS CORPORATION, TEXAS operate in? ▼
FORMOSA PLASTICS CORPORATION, TEXAS operates in the Manufacturing sector (NAICS code 325211). This industry has 14,000 employers tracked by PlainWorker, with 35,397 total OSHA inspections and $228.20M in cumulative penalties.
What are my rights if I work at FORMOSA PLASTICS CORPORATION, TEXAS? ▼
Under the Occupational Safety and Health Act, employees at FORMOSA PLASTICS CORPORATION, TEXAS have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against FORMOSA PLASTICS CORPORATION, TEXAS? ▼
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does FORMOSA PLASTICS CORPORATION, TEXAS's safety record compare to industry average? ▼
FORMOSA PLASTICS CORPORATION, TEXAS's total OSHA penalty of $167,439 is above the Manufacturing industry average of $16,300 per employer (10.3x the average). The employer has 22 inspections compared to the industry average of 2.5 per employer.

Explore PlainWorker

Manufacturing Industry

All 14,000 employers in this sector
Employers in TX

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Read our methodology — how this data is sourced, computed, and verified.

Verify with OSHA establishment search →