PlainWorker
Employers › CA

Construction · Carlsbad, CA

Finishing Touch Moulding INC

According to OSHA enforcement records (2010–2026), Finishing Touch Moulding INC has a mixed safety record: 5 violations across 2 inspections. See the full breakdown below.

Top 25% by penalty40% serious
$29,300
OSHA penalties
5
Violations cited
2
OSHA inspections
#10,898
of 100,495 penalized employers

Finishing Touch Moulding INC in Carlsbad, CA has been the subject of 2 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $29,300. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Finishing Touch Moulding INC 2 times over 2 years, roughly annually. These inspections resulted in 5 violations, averaging 2.5 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Big Sky Civil / Montana Civil Joint Venture in Belgrade, MT is another construction employer with 0 OSHA inspections on record and $0 in current penalties.

2.5
violations per inspection
40.0%
of violations were serious
89%
of penalized employers rank lower

How Finishing Touch Moulding INC compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Finishing Touch Moulding INC runs well above peers (4.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$29,300 Bottom 11% least affordable more affordable than 11% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Finishing Touch Moulding INC

The federal enforcement record for Finishing Touch Moulding INC in Carlsbad, CA includes 2 OSHA inspections and 5 violations, translating to 2.50 violations per inspection. Of those violations, 2 (40.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $40,410 in initial penalties against this employer, later adjusted to a current total of $29,300 - a 27.5% reduction. Average penalty per inspection works out to $14,650. Against the Construction industry average of $6,751 per employer, this record runs well above peers (4.3x the sector average).

Inspection activity spans from 2021-03-23 to 2023-05-31, a window of roughly 2 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2021-03-23

Last Inspection

2023-05-31

Inspection Span

2 yrs

Violations / Inspection

2.5

Avg Penalty / Inspection

$14,650

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 2 years, averaging 2.5 violations per visit. That's $14,650 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

2

Serious

40.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

60.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$40,410

Current Penalty Amount

$29,300

Penalty Reduction

27.5%

What this shows Penalties were reduced by $11,110 from the initial assessment of $40,410. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How Finishing Touch Moulding INC compares to the Construction sector, which has 61,413 employers tracked by PlainWorker.

Metric Finishing Touch Moulding INC Industry Avg
Inspections 2 2.0
Violations 5 3.3
Total Penalty $29,300 $6,751
Avg Penalty per Inspection $14,650 $3,361
View all 61,413 employers in Construction →

Nearby & Similar Employers in Construction

Canizalez Framing
Frisco, TX
3 inspections $29,300
Laurel Mountain Construction Company
Elkins, WV
2 inspections $29,300
Tri-Point Industries
Seattle, WA
3 inspections $29,300
Pro Paint & Finish
Goshen, IN
0 inspections $0
Big Sky Civil / Montana Civil Joint Venture
Belgrade, MT
0 inspections $0

Compare Finishing Touch Moulding INC vs Canizalez Framing side-by-side →

Frequently Asked Questions

Is Finishing Touch Moulding INC safe to work at? ▼
Based on OSHA records, Finishing Touch Moulding INC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 2 inspections, including 2 serious violations. Compared to Construction industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Finishing Touch Moulding INC have? ▼
Finishing Touch Moulding INC has 5 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $29,300.
How many OSHA inspections has Finishing Touch Moulding INC had? ▼
Finishing Touch Moulding INC has had 2 OSHA inspections, with the first recorded on 2021-03-23 and the most recent on 2023-05-31. This averages 2.5 violations per inspection.
What is the total penalty amount for Finishing Touch Moulding INC? ▼
Finishing Touch Moulding INC has been assessed $29,300 in current OSHA penalties, reduced from an initial assessment of $40,410 (a 27.5% reduction).
Does Finishing Touch Moulding INC have any serious or willful violations? ▼
Yes. Finishing Touch Moulding INC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Finishing Touch Moulding INC operate in? ▼
Finishing Touch Moulding INC operates in the Construction sector (NAICS code 238350). This industry has 61,413 employers tracked by PlainWorker, with 123,350 total OSHA inspections and $414.57M in cumulative penalties.
How does Finishing Touch Moulding INC's safety record compare to industry average? ▼
Finishing Touch Moulding INC's total OSHA penalty of $29,300 is above the Construction industry average of $6,751 per employer (4.3x the average). The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Big Sky Civil / Montana Civil Joint Venture in Belgrade, MT is a similar construction employer with $0 in current penalties.

Explore PlainWorker

Construction Industry

All 61,413 employers in this sector
Employers in CA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Finishing Touch Moulding INC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.