PlainWorker
Employers › MA

Construction · Framingham, MA

Fine Finish Custom Carpentry, INC.

According to OSHA enforcement records (2010–2026), Fine Finish Custom Carpentry, INC. ranks #45,870 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 9 violations across 2 inspections.

Upper half by penalty67% serious
$7,000
OSHA penalties
9
Violations cited
2
OSHA inspections
#45,870
of 99,447 penalized employers

Fine Finish Custom Carpentry, INC. in Framingham, MA has been the subject of 2 OSHA workplace inspections and 9 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $7,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Fine Finish Custom Carpentry, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 9 violations, averaging 4.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #45,870 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Ultimate Construction Albany NY, LLC in Schenectady, NY is another construction employer with 2 OSHA inspections on record and $7,000 in current penalties.

4.5
violations per inspection
66.7%
of violations were serious
#45,870
of 99,447 penalized employers

Compliance score

F 25/100
  • F OSHA safety compliance: 9 violations across 2 OSHA inspections (4.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Fine Finish Custom Carpentry, INC. sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$7,000 Bottom 46% least affordable more affordable than 46% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Fine Finish Custom Carpentry, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.68.316.023.731.4OSHA inspectionsViolations citedKAMPHUIS PIPELINE CO., OSHA inspections: 2 · Violations cited: 10PHIL COUSINEAU, OSHA inspections: 2 · Violations cited: 5ADAN MONROY-MONROY, OSHA inspections: 2 · Violations cited: 5GULF WESTERN ROOFING…, OSHA inspections: 2 · Violations cited: 2EMPACT CONCRETE CORP., OSHA inspections: 2 · Violations cited: 8MICHIGAN SYNTHETIC D…, OSHA inspections: 2 · Violations cited: 30BEST FLORIDA CONSTRU…, OSHA inspections: 2 · Violations cited: 4ERIK RAMIREZ PEREZ, OSHA inspections: 2 · Violations cited: 10DAVIS CONSTRUCTION CO, OSHA inspections: 2 · Violations cited: 4LJ SHROCK CONSTRUCTI…, OSHA inspections: 2 · Violations cited: 3J & L MASONRY, LLC, OSHA inspections: 2 · Violations cited: 8JOSE VIDAL CRUZ SARA…, OSHA inspections: 2 · Violations cited: 16TONY SCROGGS, OSHA inspections: 2 · Violations cited: 5JOSLIN CONSTRUCTION …, OSHA inspections: 2 · Violations cited: 3FINISHING TOUCH MOUL…, OSHA inspections: 2 · Violations cited: 5RAUL SANDOVAL CONSTR…, OSHA inspections: 2 · Violations cited: 8HOBERG CONTRACTING, …, OSHA inspections: 2 · Violations cited: 4OSCAR QUIRINO, OSHA inspections: 2 · Violations cited: 3CHICAGO FIREPLACE & …, OSHA inspections: 2 · Violations cited: 16RAM CONCRETE PUMPING…, OSHA inspections: 2 · Violations cited: 2Fine Finish Custom C…, OSHA inspections: 2 · Violations cited: 9
Fine Finish Custom Carpentry, INC. has 2 OSHA inspections on record and 9 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Fine Finish Custom Carpentry, INC. in the Construction enforcement ledger

Among 33,222 Construction employers with OSHA penalties on file, Fine Finish Custom Carpentry, INC. ranks #13,186 at $7,000 current penalty.

How Fine Finish Custom Carpentry, INC. Compares

Fine Finish Custom Carpentry, INC.'s 4.50 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-02-13

Last Inspection

2019-05-31

Inspection Span

1 yr

Violations / Inspection

4.5

Avg Penalty / Inspection

$3,500

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 1 year, averaging 4.5 violations per visit. That's $3,500 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

6

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$21,878

Current Penalty Amount

$7,000

Penalty Reduction

68.0%

What this shows Penalties were reduced by $14,878 from the initial assessment of $21,878. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How Fine Finish Custom Carpentry, INC. compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric Fine Finish Custom Carpentry, INC. Industry Avg
Inspections 2 2.0
Violations 9 3.3
Total Penalty $7,000 $6,767
Avg Penalty per Inspection $3,500 $3,361
View all 61,260 employers in Construction →

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for Fine Finish Custom Carpentry, INC., both outside MA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($7,000 here).

S&L Coating $7,000 TX Matt Holtmeyer Construction, INC. $7,000 IL NT Home Builders LLC $7,000 MO Safway Services, LLC $7,000 CO

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Kamphuis Pipeline CO. 2 insp. Tappen, ND Phil Cousineau 2 insp. Manlius, NY Adan Monroy-Monroy 2 insp. Braselton, GA Gulf Western Roofing & Sheet Metal, INC 2 insp. Naples, FL

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

S&L Coating
Karnes City, TX
2 inspections $7,000
Cti Management, INC.
Belton, MO
2 inspections $7,000
Brenco Construction Company, Incorporated
Milton, MA
2 inspections $7,000
Aj's Excavating, LLC
Frankfort, MI
2 inspections $7,000
Ultimate Construction Albany NY, LLC
Schenectady, NY
2 inspections $7,000

Compare Fine Finish Custom Carpentry, INC. vs S&L Coating side-by-side →

What to do with this record

Use Fine Finish Custom Carpentry, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Fine Finish Custom Carpentry, INC. against S&L Coating, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Fine Finish Custom Carpentry, INC.'s inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Fine Finish Custom Carpentry, INC. safe to work at? ▼
Based on OSHA records, Fine Finish Custom Carpentry, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 9 violations across 2 inspections, including 6 serious violations. Compared to Construction industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Fine Finish Custom Carpentry, INC. have? ▼
Fine Finish Custom Carpentry, INC. has 9 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $7,000.
How many OSHA inspections has Fine Finish Custom Carpentry, INC. had? ▼
Fine Finish Custom Carpentry, INC. has had 2 OSHA inspections, with the first recorded on 2019-02-13 and the most recent on 2019-05-31. This averages 4.5 violations per inspection.
What is the total penalty amount for Fine Finish Custom Carpentry, INC.? ▼
Fine Finish Custom Carpentry, INC. has been assessed $7,000 in current OSHA penalties, reduced from an initial assessment of $21,878 (a 68.0% reduction).
Does Fine Finish Custom Carpentry, INC. have any serious or willful violations? ▼
Yes. Fine Finish Custom Carpentry, INC. has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Fine Finish Custom Carpentry, INC. operate in? ▼
Fine Finish Custom Carpentry, INC. operates in the Construction sector (NAICS code 238350). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
Where does Fine Finish Custom Carpentry, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Fine Finish Custom Carpentry, INC. ranks #45,870 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Fine Finish Custom Carpentry, INC.'s safety record compare to industry average? ▼
Fine Finish Custom Carpentry, INC.'s total OSHA penalty of $7,000 is above the Construction industry average of $6,767 per employer (1.0x the average). The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Ultimate Construction Albany NY, LLC in Schenectady, NY is a similar construction employer with $7,000 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.