PlainWorker
Employers › IA

Manufacturing · Dyersville, IA

Engineering Services and Products Company

According to OSHA enforcement records (2010–2026), Engineering Services and Products Company ranks #7,258 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 12 violations across 5 inspections.

Top 10% by penalty50% serious
$39,107
OSHA penalties
12
Violations cited
5
OSHA inspections
#7,258
of 99,447 penalized employers

Engineering Services and Products Company in Dyersville, IA has been the subject of 5 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $39,107. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Engineering Services and Products Company 5 times over 8 years, roughly once every couple of years. These inspections resulted in 12 violations, averaging 2.4 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #7,258 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.9x the sector average) on inspection frequency. For comparison, Tyson Fresh Meats, INC. in Dakota City, NE is another manufacturing employer with 4 OSHA inspections on record and $39,138 in current penalties.

2.4
violations per inspection
50.0%
of violations were serious
#7,258
of 99,447 penalized employers

Compliance score

D 55/100
  • D OSHA safety compliance: 12 violations across 5 OSHA inspections (2.4 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Engineering Services and Products Company runs well above peers (2.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$39,107 Bottom 7% least affordable more affordable than 7% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). This entry sits in this band. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Engineering Services and Products Company.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both5.05.055.05.01.316.231.045.960.7OSHA inspectionsViolations cited7S PACKING LLC, OSHA inspections: 5 · Violations cited: 24HUNTINGTON INGALLS I…, OSHA inspections: 5 · Violations cited: 52ST. LOUIS COLD DRAWN…, OSHA inspections: 5 · Violations cited: 58AGROPUR, INC., OSHA inspections: 5 · Violations cited: 25ALABAMA METAL INDUST…, OSHA inspections: 5 · Violations cited: 14LEOTAUR TECHNOLOGY G…, OSHA inspections: 5 · Violations cited: 45PRECISION PRODUCTS, …, OSHA inspections: 5 · Violations cited: 19PENN MANUFACTURING I…, OSHA inspections: 5 · Violations cited: 15SPRINGCO METAL COATI…, OSHA inspections: 5 · Violations cited: 12KNF FLEXPAK CORPORAT…, OSHA inspections: 5 · Violations cited: 10ARCH ENTERPRISES, OSHA inspections: 5 · Violations cited: 11WAUKEGAN STEEL, LLC., OSHA inspections: 5 · Violations cited: 14SETZER FOREST PRODUC…, OSHA inspections: 5 · Violations cited: 11DIVERSIFIED INDUSTRI…, OSHA inspections: 5 · Violations cited: 14NORTH AMERICAN PRECA…, OSHA inspections: 5 · Violations cited: 12SUPERIOR METAL PRODU…, OSHA inspections: 5 · Violations cited: 8RAYTHEON, OSHA inspections: 5 · Violations cited: 4HIGHPOINT FINISHING …, OSHA inspections: 5 · Violations cited: 12HOLLY FRONTIER CHEYE…, OSHA inspections: 5 · Violations cited: 10COASTAL STONE WORKS,…, OSHA inspections: 5 · Violations cited: 13Engineering Services…, OSHA inspections: 5 · Violations cited: 12
Engineering Services and Products Company has 5 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Engineering Services and Products Company in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Engineering Services and Products Company ranks #3,654 at $39,107 current penalty.

How Engineering Services and Products Company Compares

Engineering Services and Products Company's 2.40 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

5

First Inspection

2016-07-06

Last Inspection

2024-05-22

Inspection Span

8 yrs

Violations / Inspection

2.4

Avg Penalty / Inspection

$7,821

Industry Avg / Inspection

$6,093

What this shows 5 inspections over 8 years, averaging 2.4 violations per visit. That's $7,821 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$50,212

Current Penalty Amount

$39,107

Penalty Reduction

22.1%

What this shows Penalties were reduced by $11,105 from the initial assessment of $50,212. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Engineering Services and Products Company compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Engineering Services and Products Company Industry Avg
Inspections 5 2.6
Violations 12 8.0
Total Penalty $39,107 $15,763
Avg Penalty per Inspection $7,821 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Engineering Services and Products Company, both outside IA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($39,107 here).

Smithfield Fresh Meats CORP. $39,101 IL Tyson Fresh Meats, INC. $39,138 NE Sterling Die & Engineering INC $39,140 MI Gfmco LLC $39,067 GA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (5 inspections here).

7s Packing LLC 5 insp. San Angelo, TX Huntington Ingalls Incorporated 5 insp. Pascagoula, MS ST. Louis Cold Drawn, INC. 5 insp. Saint Louis, MO Agropur, INC. 5 insp. Luxemburg, WI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Smithfield Fresh Meats CORP.
Monmouth, IL
10 inspections $39,101
MKT Apparel, Inc.
Los Angeles, CA
0 inspections $0
Bodeans Baking Group
Le Mars, IA
4 inspections $39,118
Tyson Fresh Meats, INC.
Dakota City, NE
4 inspections $39,138
Sterling Die & Engineering INC
Macomb, MI
7 inspections $39,140

Compare Engineering Services and Products Company vs Smithfield Fresh Meats CORP. side-by-side →

What to do with this record

Use Engineering Services and Products Company's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Engineering Services and Products Company against Smithfield Fresh Meats CORP., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Engineering Services and Products Company's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Engineering Services and Products Company safe to work at? ▼
Based on OSHA records, Engineering Services and Products Company's workplace safety record is mixed, with some compliance concerns. The employer has 12 violations across 5 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Engineering Services and Products Company have? ▼
Engineering Services and Products Company has 12 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $39,107.
How many OSHA inspections has Engineering Services and Products Company had? ▼
Engineering Services and Products Company has had 5 OSHA inspections, with the first recorded on 2016-07-06 and the most recent on 2024-05-22. This averages 2.4 violations per inspection.
What is the total penalty amount for Engineering Services and Products Company? ▼
Engineering Services and Products Company has been assessed $39,107 in current OSHA penalties, reduced from an initial assessment of $50,212 (a 22.1% reduction).
Does Engineering Services and Products Company have any serious or willful violations? ▼
Yes. Engineering Services and Products Company has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Engineering Services and Products Company operate in? ▼
Engineering Services and Products Company operates in the Manufacturing sector (NAICS code 332311). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Engineering Services and Products Company rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Engineering Services and Products Company ranks #7,258 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Engineering Services and Products Company's safety record compare to industry average? ▼
Engineering Services and Products Company's total OSHA penalty of $39,107 is above the Manufacturing industry average of $15,763 per employer (2.5x the average). The employer has 5 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Tyson Fresh Meats, INC. in Dakota City, NE is a similar manufacturing employer with $39,138 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 5 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.