PlainWorker
Employers › MS

Manufacturing · Pontotoc, MS

Eaton Custom Seating

According to OSHA enforcement records (2010–2026), Eaton Custom Seating has a mixed safety record: 5 violations across 3 inspections. See the full breakdown below.

Lower half by penalty60% serious
$4,036
OSHA penalties
5
Violations cited
3
OSHA inspections
#61,636
of 100,495 penalized employers

Eaton Custom Seating in Pontotoc, MS has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,036. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Eaton Custom Seating 3 times over 3 years, roughly annually. These inspections resulted in 5 violations, averaging 1.7 per inspection. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Hamilton Iron Works INC. in Woodbridge, VA is another manufacturing employer with 3 OSHA inspections on record and $4,036 in current penalties.

1.7
violations per inspection
60.0%
of violations were serious
39%
of penalized employers rank lower

How Eaton Custom Seating compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Eaton Custom Seating runs well below peers (0.26x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,036 Top 39% most affordable more affordable than 61% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Eaton Custom Seating

The federal enforcement record for Eaton Custom Seating in Pontotoc, MS includes 3 OSHA inspections and 5 violations, translating to 1.67 violations per inspection. Of those violations, 3 (60.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $6,727 in initial penalties against this employer, later adjusted to a current total of $4,036 - a 40.0% reduction. Average penalty per inspection works out to $1,345. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.26x the sector average).

Inspection activity spans from 2011-10-18 to 2014-07-18, a window of roughly 3 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-10-18

Last Inspection

2014-07-18

Inspection Span

3 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$1,345

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 3 years, averaging 1.7 violations per visit. That's $1,345 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

3

Serious

60.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

40.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$6,727

Current Penalty Amount

$4,036

Penalty Reduction

40.0%

What this shows Penalties were reduced by $2,691 from the initial assessment of $6,727. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Eaton Custom Seating compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Eaton Custom Seating Industry Avg
Inspections 3 2.5
Violations 5 7.8
Total Penalty $4,036 $15,410
Avg Penalty per Inspection $1,345 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Hamilton Iron Works INC.
Woodbridge, VA
3 inspections $4,036
SKM Production INC.
Los Angeles, CA
2 inspections $4,035
Black Rock Paving, Inc.
Salem, NH
0 inspections $0
T-N-T Plastics, INC.
Perryville, MO
2 inspections $4,033
KMS Machine Works, INC.
Taunton, MA
2 inspections $4,033

Compare Eaton Custom Seating vs Hamilton Iron Works INC. side-by-side →

Frequently Asked Questions

Is Eaton Custom Seating safe to work at? ▼
Based on OSHA records, Eaton Custom Seating's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Eaton Custom Seating have? ▼
Eaton Custom Seating has 5 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $4,036.
How many OSHA inspections has Eaton Custom Seating had? ▼
Eaton Custom Seating has had 3 OSHA inspections, with the first recorded on 2011-10-18 and the most recent on 2014-07-18. This averages 1.7 violations per inspection.
What is the total penalty amount for Eaton Custom Seating? ▼
Eaton Custom Seating has been assessed $4,036 in current OSHA penalties, reduced from an initial assessment of $6,727 (a 40.0% reduction).
Does Eaton Custom Seating have any serious or willful violations? ▼
Yes. Eaton Custom Seating has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Eaton Custom Seating operate in? ▼
Eaton Custom Seating operates in the Manufacturing sector (NAICS code 337121). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Eaton Custom Seating's safety record compare to industry average? ▼
Eaton Custom Seating's total OSHA penalty of $4,036 is below the Manufacturing industry average of $15,410 per employer. The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Hamilton Iron Works INC. in Woodbridge, VA is a similar manufacturing employer with $4,036 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MS

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Eaton Custom Seating's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.