Manufacturing · Arvada, CO

Drexel Metals INC.

According to OSHA enforcement records (2010–2026), Drexel Metals INC. ranks #7,205 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Top 10% by penalty25% serious
$39,260
OSHA penalties
4
Violations cited
2
OSHA inspections
#7,205
of 99,447 penalized employers

Drexel Metals INC. in Arvada, CO has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $39,260. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Drexel Metals INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #7,205 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Omni Baking Company, LLC in Vineland, NJ is another manufacturing employer with 4 OSHA inspections on record and $39,265 in current penalties.

2.0
violations per inspection
25.0%
of violations were serious
#7,205
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Drexel Metals INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Drexel Metals INC. runs well above peers (2.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$39,260 Bottom 7% least affordable more affordable than 7% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). This entry sits in this band. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Drexel Metals INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0026.252.478.6104.8OSHA inspectionsViolations citedU.S. MINERALS, LLC, OSHA inspections: 2 · Violations cited: 35THE GOODYEAR TIRE & …, OSHA inspections: 2 · Violations cited: 11TULIP MOLDED PLASTIC…, OSHA inspections: 2 · Violations cited: 20GARVEY CORPORATION, OSHA inspections: 2 · Violations cited: 19GREEN HORIZON GLOBAL…, OSHA inspections: 2 · Violations cited: 19AMERBELLE TEXTILES, …, OSHA inspections: 2 · Violations cited: 88S D S LUMBER CO, OSHA inspections: 2 · Violations cited: 100ANNANDALE MILLWORK A…, OSHA inspections: 2 · Violations cited: 5COMANCHE STAINLESS LLC, OSHA inspections: 2 · Violations cited: 17SOLDREAM, INC., OSHA inspections: 2 · Violations cited: 27THOMPSON PIPE GROUP …, OSHA inspections: 2 · Violations cited: 5DUDLEY HARDWOODS, LLC, OSHA inspections: 2 · Violations cited: 21PRESCRIPTION TILLAGE…, OSHA inspections: 2 · Violations cited: 48BANCROFT GRANITE AND…, OSHA inspections: 2 · Violations cited: 60BH GRANITE & QUARTZ,…, OSHA inspections: 2 · Violations cited: 15TM INDUSTRIES, LLC, OSHA inspections: 2 · Violations cited: 27EXCELSO COFFEE AND T…, OSHA inspections: 2 · Violations cited: 26DJW ASSEMBLY, INC., OSHA inspections: 2 · Violations cited: 11E.H. BAARE CORPORATION, OSHA inspections: 2 · Violations cited: 12THE SPATZ CORPORATION, OSHA inspections: 2 · Violations cited: 11Drexel Metals INC., OSHA inspections: 2 · Violations cited: 4
Drexel Metals INC. has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Drexel Metals INC. in the Manufacturing enforcement ledger

In Manufacturing, Drexel Metals INC. sits at penalty rank #3,633 of 35,243 penalized establishments ($39,260 assessed).

How Drexel Metals INC. Compares

Drexel Metals INC.'s 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-09-19

Last Inspection

2020-08-19

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$19,630

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.0 violations per visit. That's $19,630 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

25.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

75.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$64,154

Current Penalty Amount

$39,260

Penalty Reduction

38.8%

What this shows Penalties were reduced by $24,894 from the initial assessment of $64,154. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Drexel Metals INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Drexel Metals INC. Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $39,260 $15,763
Avg Penalty per Inspection $19,630 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Drexel Metals INC., both outside CO so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Drexel Metals INC. vs Omni Baking Company, LLC side-by-side →

What to do with this record

Use Drexel Metals INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Drexel Metals INC. against Omni Baking Company, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Drexel Metals INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Drexel Metals INC. safe to work at?
Based on OSHA records, Drexel Metals INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Drexel Metals INC. have?
Drexel Metals INC. has 4 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $39,260.
How many OSHA inspections has Drexel Metals INC. had?
Drexel Metals INC. has had 2 OSHA inspections, with the first recorded on 2019-09-19 and the most recent on 2020-08-19. This averages 2.0 violations per inspection.
What is the total penalty amount for Drexel Metals INC.?
Drexel Metals INC. has been assessed $39,260 in current OSHA penalties, reduced from an initial assessment of $64,154 (a 38.8% reduction).
Does Drexel Metals INC. have any serious or willful violations?
Yes. Drexel Metals INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Drexel Metals INC. operate in?
Drexel Metals INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Drexel Metals INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Drexel Metals INC. ranks #7,205 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Drexel Metals INC.'s safety record compare to industry average?
Drexel Metals INC.'s total OSHA penalty of $39,260 is above the Manufacturing industry average of $15,763 per employer (2.5x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Omni Baking Company, LLC in Vineland, NJ is a similar manufacturing employer with $39,265 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.