PlainWorker
Employers › GA

Manufacturing · Adairsville, GA

Downey Metal Products, INC.

According to OSHA enforcement records (2010–2026), Downey Metal Products, INC. has a concerning safety record: 21 violations across 2 inspections. See the full breakdown below.

Top 5% by penalty81% serious
$55,300
OSHA penalties
21
Violations cited
2
OSHA inspections
#4,388
of 100,495 penalized employers

Downey Metal Products, INC. in Adairsville, GA has been the subject of 2 OSHA workplace inspections and 21 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $55,300. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Downey Metal Products, INC. 2 times over 1 year - more than twice a year on average. These inspections turned up 21 violations, averaging 10.5 per inspection - an extremely dense concentration of citations. Its total OSHA penalty ranks in the top 5% of penalized employers nationally. Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Peterson Products, INC. in Dayton, NV is another manufacturing employer with 12 OSHA inspections on record and $55,312 in current penalties.

10.5
violations per inspection
81.0%
of violations were serious
96%
of penalized employers rank lower

How Downey Metal Products, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Downey Metal Products, INC. runs well above peers (3.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$55,300 Bottom 4% least affordable more affordable than 4% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($55,300) is well above this band, the chart's rightmost open-ended bucket. This employer: $55,300 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Downey Metal Products, INC.

The federal enforcement record for Downey Metal Products, INC. in Adairsville, GA includes 2 OSHA inspections and 21 violations, translating to 10.50 violations per inspection. Of those violations, 17 (81.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $55,300 in initial penalties against this employer, later adjusted to a current total of $55,300 - no reduction from the original assessment. Average penalty per inspection works out to $27,650. Against the Manufacturing industry average of $15,410 per employer, this record runs well above peers (3.6x the sector average).

Inspection activity spans from 2013-04-11 to 2013-05-01, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-04-11

Last Inspection

2013-05-01

Inspection Span

1 yr

Violations / Inspection

10.5

Avg Penalty / Inspection

$27,650

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 10.5 violations per visit. That's $27,650 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

17

Serious

81.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

19.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$55,300

Current Penalty Amount

$55,300

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Downey Metal Products, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Downey Metal Products, INC. Industry Avg
Inspections 2 2.5
Violations 21 7.8
Total Penalty $55,300 $15,410
Avg Penalty per Inspection $27,650 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

John Deere Davenport Works
Davenport, IA
8 inspections $53,070
Peterson Products, INC.
Dayton, NV
12 inspections $55,312
Alumax, INC.
Ponce, PR
3 inspections $55,270
Estad Stamping & MFG. CO.
Danville, IL
2 inspections $55,266
Marine Metal, INC.
Brownsville, TX
7 inspections $20,340

Compare Downey Metal Products, INC. vs John Deere Davenport Works side-by-side →

Frequently Asked Questions

Is Downey Metal Products, INC. safe to work at? ▼
Based on OSHA records, Downey Metal Products, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 21 violations across 2 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Downey Metal Products, INC. have? ▼
Downey Metal Products, INC. has 21 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $55,300.
How many OSHA inspections has Downey Metal Products, INC. had? ▼
Downey Metal Products, INC. has had 2 OSHA inspections, with the first recorded on 2013-04-11 and the most recent on 2013-05-01. This averages 10.5 violations per inspection.
What is the total penalty amount for Downey Metal Products, INC.? ▼
Downey Metal Products, INC. has been assessed $55,300 in current OSHA penalties.
Does Downey Metal Products, INC. have any serious or willful violations? ▼
Yes. Downey Metal Products, INC. has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Downey Metal Products, INC. operate in? ▼
Downey Metal Products, INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Downey Metal Products, INC.'s safety record compare to industry average? ▼
Downey Metal Products, INC.'s total OSHA penalty of $55,300 is above the Manufacturing industry average of $15,410 per employer (3.6x the average). The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Peterson Products, INC. in Dayton, NV is a similar manufacturing employer with $55,312 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in GA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Downey Metal Products, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.