PlainWorker
Employers › KS

Manufacturing · Overland Park, KS

Dimensional Stoneworks LLC

According to OSHA enforcement records (2010–2026), Dimensional Stoneworks LLC has a relatively clean safety record: 0 violations across 3 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
3
OSHA inspections

Dimensional Stoneworks LLC in Overland Park, KS has been the subject of 3 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Dimensional Stoneworks LLC 3 times over 6 years, roughly once every couple of years. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Phelps Dodge Refining Corporation in El Paso, TX is another manufacturing employer with 3 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 3 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Dimensional Stoneworks LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.006.012.118.124.1OSHA inspectionsViolations citedHONEYWELL INTERNATIONAL INC., OSHA inspections: 3 · Violations cited: 10BRISTOL-MYERS SQUIBB COMPANY, OSHA inspections: 3 · Violations cited: 6GEORGE INDUSTRIES LLC, OSHA inspections: 3 · Violations cited: 17GILMAN BUILDING PRODUCTS, LLC, OSHA inspections: 3 · Violations cited: 23HITACHI AUTOMOTIVE SYSTEMS AMERICA, INC., OSHA inspections: 3 · Violations cited: 6CALIFORNIA INNOVATIONS ROTOMOLDING USA, INC., OSHA inspections: 3 · Violations cited: 20COLORADO TIMBER RESOURCES LLC, OSHA inspections: 3 · Violations cited: 21BALL METAL BEVERAGE CONTAINER CORP., OSHA inspections: 3 · Violations cited: 10COORSTEK, INC., OSHA inspections: 3 · Violations cited: 10INW LIVING ECOLOGY OPCO, LLC, OSHA inspections: 3 · Violations cited: 6FORMOSA PLASTICS CORPORATION, OSHA inspections: 3 · Violations cited: 3MULTIVAC, OSHA inspections: 3 · Violations cited: 9AMERICAN STANDARD BRANDS, OSHA inspections: 3 · Violations cited: 7KEY BELLEVILLES, INC., OSHA inspections: 3 · Violations cited: 20GULF RICE MILLING, INC., OSHA inspections: 3 · Violations cited: 12HARTUNG GLASS INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 6PLAS-TEC CORP., OSHA inspections: 3 · Violations cited: 8PHOENIX MILLWORK, INC., OSHA inspections: 3 · Violations cited: 23ARROW FASTENER CO., LLC., OSHA inspections: 3 · Violations cited: 11TASSOS METAL, INC., OSHA inspections: 3 · Violations cited: 21Dimensional Stoneworks LLC, OSHA inspections: 3 · Violations cited: 0
Dimensional Stoneworks LLC has 3 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Dimensional Stoneworks LLC Compares

3 OSHA inspections on record for Dimensional Stoneworks LLC in Overland Park, KS, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Dimensional Stoneworks LLC to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-01-12

Last Inspection

2018-02-15

Inspection Span

6 yrs

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 6 years, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How Dimensional Stoneworks LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Dimensional Stoneworks LLC Industry Avg
Inspections 3 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Dimensional Stoneworks LLC, both outside KS so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Honeywell International INC. 3 insp. Geismar, LA Bristol-Myers Squibb Company 3 insp. Devens, MA George Industries LLC 3 insp. Endicott, NY Gilman Building Products, LLC 3 insp. Dudley, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Supreme Meats INC
Saint Francis, WI
2 inspections $0
Meta Manufacturing Corporation
Blue Ash, OH
2 inspections $0
Truss Craft of Nebraska
Grand Island, NE
2 inspections $0
F & F Foods, INC.
Chicago, IL
2 inspections $0
Phelps Dodge Refining Corporation
El Paso, TX
3 inspections $0

Compare Dimensional Stoneworks LLC vs Supreme Meats INC side-by-side →

What to do with this record

Use Dimensional Stoneworks LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Dimensional Stoneworks LLC against Supreme Meats INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Dimensional Stoneworks LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Dimensional Stoneworks LLC safe to work at? ▼
Based on OSHA records, Dimensional Stoneworks LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Dimensional Stoneworks LLC have? ▼
Dimensional Stoneworks LLC has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Dimensional Stoneworks LLC had? ▼
Dimensional Stoneworks LLC has had 3 OSHA inspections, with the first recorded on 2012-01-12 and the most recent on 2018-02-15. This averages 0.0 violations per inspection.
What is the total penalty amount for Dimensional Stoneworks LLC? ▼
Dimensional Stoneworks LLC has been assessed $0 in current OSHA penalties.
What industry does Dimensional Stoneworks LLC operate in? ▼
Dimensional Stoneworks LLC operates in the Manufacturing sector (NAICS code 327390). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Dimensional Stoneworks LLC's safety record compare to industry average? ▼
Dimensional Stoneworks LLC's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Phelps Dodge Refining Corporation in El Paso, TX is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.