PlainWorker
Employers › MO

Manufacturing · Fenton, MO

Davis Tool & Die

According to OSHA enforcement records (2010–2026), Davis Tool & Die has a concerning safety record: 25 violations across 2 inspections. See the full breakdown below.

Top 10% by penalty84% serious
$35,287
OSHA penalties
25
Violations cited
2
OSHA inspections
#8,359
of 100,495 penalized employers

Davis Tool & Die in Fenton, MO has been the subject of 2 OSHA workplace inspections and 25 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $35,287. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Davis Tool & Die 2 times over 1 year - more than twice a year on average. These inspections turned up 25 violations, averaging 12.5 per inspection - an extremely dense concentration of citations. Its total OSHA penalty ranks in the top 10% of penalized employers nationally. Of these, 21 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, P.O.M in Los Angeles, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

12.5
violations per inspection
84.0%
of violations were serious
92%
of penalized employers rank lower

How Davis Tool & Die compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Davis Tool & Die runs well above peers (2.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$35,287 Bottom 8% least affordable more affordable than 8% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). This entry sits in this band. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Davis Tool & Die

The federal enforcement record for Davis Tool & Die in Fenton, MO includes 2 OSHA inspections and 25 violations, translating to 12.50 violations per inspection. Of those violations, 21 (84.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $84,553 in initial penalties against this employer, later adjusted to a current total of $35,287 - a 58.3% reduction. Average penalty per inspection works out to $17,644. Against the Manufacturing industry average of $15,410 per employer, this record runs well above peers (2.3x the sector average).

Inspection activity spans from 2012-03-21 to 2013-03-06, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-03-21

Last Inspection

2013-03-06

Inspection Span

1 yr

Violations / Inspection

12.5

Avg Penalty / Inspection

$17,644

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 12.5 violations per visit. That's $17,644 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

21

Serious

84.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

16.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$84,553

Current Penalty Amount

$35,287

Penalty Reduction

58.3%

What this shows Penalties were reduced by $49,266 from the initial assessment of $84,553. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Davis Tool & Die compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Davis Tool & Die Industry Avg
Inspections 2 2.5
Violations 25 7.8
Total Penalty $35,287 $15,410
Avg Penalty per Inspection $17,644 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Kaspar Ranch Hand Equipment LLC
Shiner, TX
2 inspections $35,287
P.O.M
Los Angeles, CA
0 inspections $0
Southern Metal Fabricators, INC.
Albertville, AL
4 inspections $35,292
Curtis Metal Finishing Company
Sterling Heights, MI
12 inspections $35,280
General Packaging Corporation
Dallas, TX
7 inspections $35,300

Compare Davis Tool & Die vs Kaspar Ranch Hand Equipment LLC side-by-side →

Frequently Asked Questions

Is Davis Tool & Die safe to work at? ▼
Based on OSHA records, Davis Tool & Die's workplace safety record is concerning, with multiple serious compliance issues. The employer has 25 violations across 2 inspections, including 21 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Davis Tool & Die have? ▼
Davis Tool & Die has 25 OSHA violations on record, including 21 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $35,287.
How many OSHA inspections has Davis Tool & Die had? ▼
Davis Tool & Die has had 2 OSHA inspections, with the first recorded on 2012-03-21 and the most recent on 2013-03-06. This averages 12.5 violations per inspection.
What is the total penalty amount for Davis Tool & Die? ▼
Davis Tool & Die has been assessed $35,287 in current OSHA penalties, reduced from an initial assessment of $84,553 (a 58.3% reduction).
Does Davis Tool & Die have any serious or willful violations? ▼
Yes. Davis Tool & Die has 21 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Davis Tool & Die operate in? ▼
Davis Tool & Die operates in the Manufacturing sector (NAICS code 333513). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Davis Tool & Die's safety record compare to industry average? ▼
Davis Tool & Die's total OSHA penalty of $35,287 is above the Manufacturing industry average of $15,410 per employer (2.3x the average). The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, P.O.M in Los Angeles, CA is a similar manufacturing employer with $0 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MO

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Davis Tool & Die's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.