Manufacturing · Genoa, IL

Custom Aluminum Products Genoa, INC.

According to OSHA enforcement records (2010–2026), Custom Aluminum Products Genoa, INC. ranks #11,228 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 4 inspections.

Top 25% by penalty93% serious
$28,684
OSHA penalties
14
Violations cited
4
OSHA inspections
#11,228
of 99,447 penalized employers

Custom Aluminum Products Genoa, INC. in Genoa, IL has been the subject of 4 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $28,684. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Custom Aluminum Products Genoa, INC. 4 times over 4 years, roughly annually. These inspections resulted in 14 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #11,228 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, The Cubbison Company in Youngstown, OH is another manufacturing employer with 2 OSHA inspections on record and $28,674 in current penalties.

3.5
violations per inspection
92.9%
of violations were serious
#11,228
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 14 violations across 4 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Custom Aluminum Products Genoa, INC. runs moderately above peers (1.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$28,684 Bottom 11% least affordable more affordable than 11% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Custom Aluminum Products Genoa, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.008.416.825.233.5OSHA inspectionsViolations citedFIVE STAR CUSTOM FOO…, OSHA inspections: 4 · Violations cited: 31MIDWEST HARDWOOD COM…, OSHA inspections: 4 · Violations cited: 1TRUCK ACCESSORIES GR…, OSHA inspections: 4 · Violations cited: 6SCHNEIDER ELECTRIC, OSHA inspections: 4 · Violations cited: 23CHEMTRADE SOLUTIONS …, OSHA inspections: 4 · Violations cited: 10ADVANTAGE STEEL SERV…, OSHA inspections: 4 · Violations cited: 10ANKER PAK, OSHA inspections: 4 · Violations cited: 12GEORGIA CARPET FINIS…, OSHA inspections: 4 · Violations cited: 20LATICRETE INTERNATIO…, OSHA inspections: 4 · Violations cited: 3VALLEY ENTERPRISES, OSHA inspections: 4 · Violations cited: 11SPS TECHNOLOGIES, LLC, OSHA inspections: 4 · Violations cited: 6MORGAN BROTHERS MILL…, OSHA inspections: 4 · Violations cited: 22ADVANCED MACHINE AND…, OSHA inspections: 4 · Violations cited: 32MECHANICAL & CERAMIC…, OSHA inspections: 4 · Violations cited: 13TOTH INDUSTRIES, INC., OSHA inspections: 4 · Violations cited: 9BUSH BROTHERS & COMP…, OSHA inspections: 4 · Violations cited: 4TYSON POULTRY, INC., OSHA inspections: 4 · Violations cited: 1RIDGEVIEW INDUSTRIES, OSHA inspections: 4 · Violations cited: 13PECO FOODS, INC, OSHA inspections: 4 · Violations cited: 5GIDDINGS BOAT WORKS,…, OSHA inspections: 4 · Violations cited: 6Custom Aluminum Prod…, OSHA inspections: 4 · Violations cited: 14
Custom Aluminum Products Genoa, INC. has 4 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Custom Aluminum Products Genoa, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Custom Aluminum Products Genoa, INC. is the #5,561 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($28,684).

How Custom Aluminum Products Genoa, INC. Compares

Custom Aluminum Products Genoa, INC.'s 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2014-04-04

Last Inspection

2017-10-16

Inspection Span

4 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$7,171

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 4 years, averaging 3.5 violations per visit. That's $7,171 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

13

Serious

92.9% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

7.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$57,683

Current Penalty Amount

$28,684

Penalty Reduction

50.3%

What this shows Penalties were reduced by $28,999 from the initial assessment of $57,683. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Custom Aluminum Products Genoa, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Custom Aluminum Products Genoa, INC. Industry Avg
Inspections 4 2.6
Violations 14 8.0
Total Penalty $28,684 $15,763
Avg Penalty per Inspection $7,171 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Custom Aluminum Products Genoa, INC., both outside IL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($28,684 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Custom Aluminum Products Genoa, INC. vs Epl America, LLC side-by-side →

What to do with this record

Use Custom Aluminum Products Genoa, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Custom Aluminum Products Genoa, INC. against Epl America, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Custom Aluminum Products Genoa, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Custom Aluminum Products Genoa, INC. safe to work at?
Based on OSHA records, Custom Aluminum Products Genoa, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 4 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Custom Aluminum Products Genoa, INC. have?
Custom Aluminum Products Genoa, INC. has 14 OSHA violations on record, including 13 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $28,684.
How many OSHA inspections has Custom Aluminum Products Genoa, INC. had?
Custom Aluminum Products Genoa, INC. has had 4 OSHA inspections, with the first recorded on 2014-04-04 and the most recent on 2017-10-16. This averages 3.5 violations per inspection.
What is the total penalty amount for Custom Aluminum Products Genoa, INC.?
Custom Aluminum Products Genoa, INC. has been assessed $28,684 in current OSHA penalties, reduced from an initial assessment of $57,683 (a 50.3% reduction).
Does Custom Aluminum Products Genoa, INC. have any serious or willful violations?
Yes. Custom Aluminum Products Genoa, INC. has 13 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Custom Aluminum Products Genoa, INC. operate in?
Custom Aluminum Products Genoa, INC. operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Custom Aluminum Products Genoa, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Custom Aluminum Products Genoa, INC. ranks #11,228 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Custom Aluminum Products Genoa, INC.'s safety record compare to industry average?
Custom Aluminum Products Genoa, INC.'s total OSHA penalty of $28,684 is above the Manufacturing industry average of $15,763 per employer (1.8x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, The Cubbison Company in Youngstown, OH is a similar manufacturing employer with $28,674 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.