Construction · Massillon, OH
Creekside Metals, LLC
According to OSHA enforcement records (2010–2026), Creekside Metals, LLC ranks #20,363 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 4 violations across 2 inspections.
- $17,593
- OSHA penalties
- 4
- Violations cited
- 2
- OSHA inspections
- #20,363
- of 99,447 penalized employers
Creekside Metals, LLC in Massillon, OH has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,593. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.
The record in one line
OSHA has inspected Creekside Metals, LLC 2 times over 2 years, roughly annually. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #20,363 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Young's Roofing, INC. in Hillsboro, IL is another construction employer with 3 OSHA inspections on record and $17,591 in current penalties.
- 2.0
- violations per inspection
- 75.0%
- of violations were serious
- #20,363
- of 99,447 penalized employers
Compliance score
- D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.
How Creekside Metals, LLC compares on OSHA penalties
Total current penalty vs the Construction per-employer average
- Creekside Metals, LLC
Creekside Metals, LLC
$17,593 in penalties
- Construction avg $6,767
Construction industry average (per employer)
$6,767 in penalties
What this shows Creekside Metals, LLC runs well above peers (2.6x the sector average) in total OSHA penalties.
Where this penalty ranks nationally
Total current OSHA penalty vs every U.S. employer with a nonzero penalty
$17,593 Bottom 20% least affordable more affordable than 20% of 99,447 U.S. employers with a penalty
Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.
Source U.S. Department of Labor, OSHA enforcement extracts · 2026
Does more inspection scrutiny mean more findings?
Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Creekside Metals, LLC.
Creekside Metals, LLC in the Construction enforcement ledger
Among 33,222 Construction employers with OSHA penalties on file, Creekside Metals, LLC ranks #5,116 at $17,593 current penalty.
How Creekside Metals, LLC Compares
Creekside Metals, LLC's 2.00 violations per inspection compares to the Construction sector average of 3.3 violations per employer.
Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs well above peers (2.6x the sector average).
Enforcement detail
OSHA Inspection History
Total Inspections
2
First Inspection
2020-10-15
Last Inspection
2022-06-22
Inspection Span
2 yrs
Violations / Inspection
2.0
Avg Penalty / Inspection
$8,797
Industry Avg / Inspection
$3,361
What this shows 2 inspections over 2 years, averaging 2.0 violations per visit. That's $8,797 per inspection vs. the Construction average of $3,361.
Enforcement detail
Violation Breakdown
3
Serious
75.0% of total
0
Willful
0.0% of total
1
Repeat
25.0% of total
0
Other-Than-Serious
0.0% of total
What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.
Enforcement detail
Penalty Analysis
Initial Penalty Assessed
$17,593
Current Penalty Amount
$17,593
Penalty Reduction
None
What this shows No reduction on record. The current penalty matches the original OSHA assessment.
Industry Safety Context: Construction
How Creekside Metals, LLC compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.
| Metric | Creekside Metals, LLC | Industry Avg |
|---|---|---|
| Inspections | 2 | 2.0 |
| Violations | 4 | 3.3 |
| Total Penalty | $17,593 | $6,767 |
| Avg Penalty per Inspection | $8,797 | $3,361 |
Nationwide Construction peers with similar penalties or inspection counts
Two OSHA-record peer sets for Creekside Metals, LLC, both outside OH so the neighborhoods are not geographic containment.
Similar current OSHA penalty
Nearest same-sector employers by current assessed penalty ($17,593 here).
Similar OSHA inspection count
Same-sector employers with a comparable inspection history outside this state (2 inspections here).
Nearby & Similar Employers in Construction
Showing 5 of 61259 other employers tracked in this sector.
Compare Creekside Metals, LLC vs Luis Morales side-by-side →
What to do with this record
Use Creekside Metals, LLC's enforcement history as one data point, not the whole picture.
- A single employer's record can look unusual in isolation. Compare Creekside Metals, LLC against Luis Morales, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
- See whether Creekside Metals, LLC's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
- Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers
Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.
Frequently Asked Questions
Is Creekside Metals, LLC safe to work at? ▼
How many OSHA violations does Creekside Metals, LLC have? ▼
How many OSHA inspections has Creekside Metals, LLC had? ▼
What is the total penalty amount for Creekside Metals, LLC? ▼
Does Creekside Metals, LLC have any serious or willful violations? ▼
What industry does Creekside Metals, LLC operate in? ▼
Where does Creekside Metals, LLC rank nationally on OSHA penalties? ▼
How does Creekside Metals, LLC's safety record compare to industry average? ▼
Data Sources & Methodology ▼
Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).
Source: OSHA Enforcement Data
Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.
Source: Wage and Hour Division (WHD)
Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.
Employer Matching
Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.