PlainWorker
Employers › CA

Manufacturing · Colton, CA

Craig's Custom Design LLC

According to OSHA enforcement records (2010–2026), Craig's Custom Design LLC ranks #46,866 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 9 violations across 2 inspections.

Upper half by penalty33% serious
$6,735
OSHA penalties
9
Violations cited
2
OSHA inspections
#46,866
of 99,447 penalized employers

Craig's Custom Design LLC in Colton, CA has been the subject of 2 OSHA workplace inspections and 9 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,735. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Craig's Custom Design LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 9 violations, averaging 4.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #46,866 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Felix Schoeller North America, INC. in Pulaski, NY is another manufacturing employer with 2 OSHA inspections on record and $6,736 in current penalties.

4.5
violations per inspection
33.3%
of violations were serious
#46,866
of 99,447 penalized employers

Compliance score

F 25/100
  • F OSHA safety compliance: 9 violations across 2 OSHA inspections (4.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Craig's Custom Design LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Craig's Custom Design LLC runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,735 Bottom 47% least affordable more affordable than 47% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Craig's Custom Design LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.215.631.046.461.8OSHA inspectionsViolations citedNEWMAN & COMPANY, OSHA inspections: 2 · Violations cited: 52WHITESELL CORPORATION, OSHA inspections: 2 · Violations cited: 59FABCO LLC, OSHA inspections: 2 · Violations cited: 5PALLETS AND MORE LLC, OSHA inspections: 2 · Violations cited: 28DI-FERRARO, INC DBA …, OSHA inspections: 2 · Violations cited: 21HEARTHSIDE FOOD SOLU…, OSHA inspections: 2 · Violations cited: 4SEABOARD FOODS LLC, OSHA inspections: 2 · Violations cited: 5MORIDGE MANUFACTURIN…, OSHA inspections: 2 · Violations cited: 14VERSOGEN, OSHA inspections: 2 · Violations cited: 9GREGORY PALLET AND L…, OSHA inspections: 2 · Violations cited: 7ARVCO CONTAINERS COR…, OSHA inspections: 2 · Violations cited: 31BELL INCORPORATED, OSHA inspections: 2 · Violations cited: 8BOXABL INC, OSHA inspections: 2 · Violations cited: 5ARGLASS YAMAMURA SE,…, OSHA inspections: 2 · Violations cited: 9FORD STEEL, LLC, OSHA inspections: 2 · Violations cited: 15US MAGNESIUM, OSHA inspections: 2 · Violations cited: 8THE PENNSYLVANIA GLO…, OSHA inspections: 2 · Violations cited: 24NANCE CARPET AND RUG…, OSHA inspections: 2 · Violations cited: 17PARKER HANNIFIN CORP…, OSHA inspections: 2 · Violations cited: 3K BROTHERS CORPORATI…, OSHA inspections: 2 · Violations cited: 26Craig's Custom Desig…, OSHA inspections: 2 · Violations cited: 9
Craig's Custom Design LLC has 2 OSHA inspections on record and 9 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Craig's Custom Design LLC in the Manufacturing enforcement ledger

Manufacturing sector: Craig's Custom Design LLC is the #20,223 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($6,735).

How Craig's Custom Design LLC Compares

Craig's Custom Design LLC's 4.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-01-28

Last Inspection

2014-12-09

Inspection Span

1 yr

Violations / Inspection

4.5

Avg Penalty / Inspection

$3,368

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 4.5 violations per visit. That's $3,368 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

33.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

66.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$6,735

Current Penalty Amount

$6,735

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Craig's Custom Design LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Craig's Custom Design LLC Industry Avg
Inspections 2 2.6
Violations 9 8.0
Total Penalty $6,735 $15,763
Avg Penalty per Inspection $3,368 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Craig's Custom Design LLC, both outside CA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,735 here).

Felix Schoeller North America, INC. $6,736 NY Mack Molding Company, INC. $6,734 VT Darco Manufacturing INC. $6,734 NY Keppel Amfels, L.L.C. $6,734 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Newman & Company 2 insp. Philadelphia, PA Whitesell Corporation 2 insp. Muscle Shoals, AL Fabco LLC 2 insp. Denver, CO Pallets and More LLC 2 insp. Zebulon, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Felix Schoeller North America, INC.
Pulaski, NY
2 inspections $6,736
Mack Molding Company, INC.
West Arlington, VT
3 inspections $6,734
Darco Manufacturing INC.
Syracuse, NY
2 inspections $6,734
Keppel Amfels, L.L.C.
Brownsville, TX
2 inspections $6,734
Michigan Pallet Recycling INC
Charlotte, MI
2 inspections $6,740

Compare Craig's Custom Design LLC vs Felix Schoeller North America, INC. side-by-side →

What to do with this record

Use Craig's Custom Design LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Craig's Custom Design LLC against Felix Schoeller North America, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Craig's Custom Design LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Craig's Custom Design LLC safe to work at? ▼
Based on OSHA records, Craig's Custom Design LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 9 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Craig's Custom Design LLC have? ▼
Craig's Custom Design LLC has 9 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,735.
How many OSHA inspections has Craig's Custom Design LLC had? ▼
Craig's Custom Design LLC has had 2 OSHA inspections, with the first recorded on 2014-01-28 and the most recent on 2014-12-09. This averages 4.5 violations per inspection.
What is the total penalty amount for Craig's Custom Design LLC? ▼
Craig's Custom Design LLC has been assessed $6,735 in current OSHA penalties.
Does Craig's Custom Design LLC have any serious or willful violations? ▼
Yes. Craig's Custom Design LLC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Craig's Custom Design LLC operate in? ▼
Craig's Custom Design LLC operates in the Manufacturing sector (NAICS code 337127). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Craig's Custom Design LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Craig's Custom Design LLC ranks #46,866 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Craig's Custom Design LLC's safety record compare to industry average? ▼
Craig's Custom Design LLC's total OSHA penalty of $6,735 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Felix Schoeller North America, INC. in Pulaski, NY is a similar manufacturing employer with $6,736 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.