PlainWorker
Employers › CO

Manufacturing · Arvada, CO

Colorado Precision Machining

According to OSHA enforcement records (2010–2026), Colorado Precision Machining has a mixed safety record: 3 violations across 1 inspections. See the full breakdown below.

Lower half by penalty33% serious
$650
OSHA penalties
3
Violations cited
1
OSHA inspections
$19,542
Back wages owed

Colorado Precision Machining in Arvada, CO has been the subject of 1 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $650. The employer also has 1 Wage and Hour Division (WHD) case on record, covering Fair Labor Standards Act enforcement. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Colorado Precision Machining once. These inspections resulted in 3 violations, averaging 3.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.4x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $19,542 in back wages owed to 10 affected workers. For comparison, Weiler Corporation in Cresco, PA is another manufacturing employer with 2 OSHA inspections on record and $12,810 in current penalties.

3.0
violations per inspection
33.3%
of violations were serious
9%
of penalized employers rank lower
$19,542
in back wages recovered

How Colorado Precision Machining compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Colorado Precision Machining runs well below peers (0.04x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$650 Top 9% most affordable more affordable than 91% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Colorado Precision Machining

The federal enforcement record for Colorado Precision Machining in Arvada, CO includes 1 OSHA inspection and 3 violations, translating to 3.00 violations per inspection. Of those violations, 1 (33.3%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $1,200 in initial penalties against this employer, later adjusted to a current total of $650 - a 45.8% reduction. Average penalty per inspection works out to $650. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.04x the sector average). The Wage and Hour Division added 1 case producing $19,542 in back wages owed to 10 affected workers.

Inspection activity spans from 2014-03-24 to 2014-03-24, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

1

First Inspection

2014-03-24

Last Inspection

2014-03-24

Inspection Span

1 yr

Violations / Inspection

3.0

Avg Penalty / Inspection

$650

Industry Avg / Inspection

$6,092

What this shows 1 inspection over 1 year, averaging 3.0 violations per visit. That's $650 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

1

Serious

33.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

66.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,200

Current Penalty Amount

$650

Penalty Reduction

45.8%

Combined Impact (OSHA + WHD)

$20,192

What this shows Penalties were reduced by $550 from the initial assessment of $1,200. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$19,542
Employees Affected
10
WHD Violations
14
Avg Back Wages per Employee
$1,954
Avg Back Wages per Case
$19,542

The Department of Labor's Wage and Hour Division found that Colorado Precision Machining owed $19,542 in back wages to 10 employees across 1 case and 14 violations. WHD enforces federal labor laws including the Fair Labor Standards Act (FLSA), covering minimum wage, overtime pay, and child labor standards.

Industry Safety Context: Manufacturing

How Colorado Precision Machining compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Colorado Precision Machining Industry Avg
Inspections 1 2.5
Violations 3 7.8
Total Penalty $650 $15,410
Avg Penalty per Inspection $650 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Weiler Corporation
Cresco, PA
2 inspections $12,810
Overhead Door Corporation-Nebraska Div.
Grand Island, NE
2 inspections $20,190
Mayco Industries, INC.
Granite City, IL
8 inspections $20,197
Doolittle Trailer Manufacturing Company
Holts Summit, MO
2 inspections $20,197
Bismarck Steel LLC
Dunbar, WV
6 inspections $20,200

Compare Colorado Precision Machining vs Weiler Corporation side-by-side →

Frequently Asked Questions

Is Colorado Precision Machining safe to work at? ▼
Based on OSHA records, Colorado Precision Machining's workplace safety record is mixed, with some compliance concerns. The employer has 3 violations across 1 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Colorado Precision Machining have? ▼
Colorado Precision Machining has 3 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $650.
How many OSHA inspections has Colorado Precision Machining had? ▼
Colorado Precision Machining has had 1 OSHA inspections, with the first recorded on 2014-03-24 and the most recent on 2014-03-24. This averages 3.0 violations per inspection.
What is the total penalty amount for Colorado Precision Machining? ▼
Colorado Precision Machining has been assessed $650 in current OSHA penalties, reduced from an initial assessment of $1,200 (a 45.8% reduction). Additionally, $19,542 in back wages were owed through WHD enforcement.
Does Colorado Precision Machining have any serious or willful violations? ▼
Yes. Colorado Precision Machining has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
Has Colorado Precision Machining been cited for wage theft? ▼
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Colorado Precision Machining, resulting in $19,542 in back wages owed to 10 affected workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Colorado Precision Machining operate in? ▼
Colorado Precision Machining operates in the Manufacturing sector (NAICS code 332721). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
What should I do if Colorado Precision Machining owes me wages? ▼
If you believe Colorado Precision Machining owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $19,542 in back wages owed by this employer across 1 case.
How does Colorado Precision Machining's safety record compare to industry average? ▼
Colorado Precision Machining's total OSHA penalty of $650 is below the Manufacturing industry average of $15,410 per employer. The employer has 1 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Weiler Corporation in Cresco, PA is a similar manufacturing employer with $12,810 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in CO

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Colorado Precision Machining's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 1 inspection on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.