PlainWorker
Employers › NV

Manufacturing · Las Vegas, NV

Certain Teed Gypsum Manufacturing, INC

According to OSHA enforcement records (2010–2026), Certain Teed Gypsum Manufacturing, INC ranks #18,006 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 4 inspections.

Top 25% by penalty50% serious
$19,584
OSHA penalties
6
Violations cited
4
OSHA inspections
#18,006
of 99,447 penalized employers

Certain Teed Gypsum Manufacturing, INC in Las Vegas, NV has been the subject of 4 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $19,584. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Certain Teed Gypsum Manufacturing, INC 4 times over 7 years, roughly once every couple of years. These inspections resulted in 6 violations, averaging 1.5 per inspection. According to OSHA enforcement records, its total current penalty ranks #18,006 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, JW Fashion Co Inc in Rosemead, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

1.5
violations per inspection
50.0%
of violations were serious
#18,006
of 99,447 penalized employers

Compliance score

C 68/100
  • C OSHA safety compliance: 6 violations across 4 OSHA inspections (1.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Certain Teed Gypsum Manufacturing, INC runs moderately above peers (1.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$19,584 Bottom 18% least affordable more affordable than 18% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Certain Teed Gypsum Manufacturing, INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.00.87.41420.627.2OSHA inspectionsViolations citedSUGAR CREEK PACKING …, OSHA inspections: 4 · Violations cited: 18MARENGO TOOL & DIE W…, OSHA inspections: 4 · Violations cited: 16AMERICAN CRYSTAL SUGAR, OSHA inspections: 4 · Violations cited: 9ANOPLATE CORPORATION, OSHA inspections: 4 · Violations cited: 26TITAN MODULAR SYSTEM…, OSHA inspections: 4 · Violations cited: 25BALLYMORE COMPANY, I…, OSHA inspections: 4 · Violations cited: 17AROOSTOOK TRUSSES, I…, OSHA inspections: 4 · Violations cited: 8DRAINAGE PRODUCTS, I…, OSHA inspections: 4 · Violations cited: 14WVA MANUFACTURING, LLC, OSHA inspections: 4 · Violations cited: 9MICROFLEX, INC., OSHA inspections: 4 · Violations cited: 7G & V MACHINE CO., I…, OSHA inspections: 4 · Violations cited: 7FISCHER USA STAINLES…, OSHA inspections: 4 · Violations cited: 12MAGNODE CORPORATION, OSHA inspections: 4 · Violations cited: 9RYERSON INC., OSHA inspections: 4 · Violations cited: 9ROADRUNNER PHARMACY,…, OSHA inspections: 4 · Violations cited: 12ARCONIC US LLC, OSHA inspections: 4 · Violations cited: 7JOHN DEERE OTTUMWA W…, OSHA inspections: 4 · Violations cited: 5FINELINE INDUSTRIES,…, OSHA inspections: 4 · Violations cited: 24AER MANUFACTURING, L…, OSHA inspections: 4 · Violations cited: 2GKN AEROSPACE, OSHA inspections: 4 · Violations cited: 7Certain Teed Gypsum …, OSHA inspections: 4 · Violations cited: 6
Certain Teed Gypsum Manufacturing, INC has 4 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Certain Teed Gypsum Manufacturing, INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Certain Teed Gypsum Manufacturing, INC ranks #8,700 at $19,584 current penalty.

How Certain Teed Gypsum Manufacturing, INC Compares

Certain Teed Gypsum Manufacturing, INC's 1.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2017-02-14

Last Inspection

2024-05-14

Inspection Span

7 yrs

Violations / Inspection

1.5

Avg Penalty / Inspection

$4,896

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 7 years, averaging 1.5 violations per visit. That's $4,896 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$46,032

Current Penalty Amount

$19,584

Penalty Reduction

57.5%

What this shows Penalties were reduced by $26,448 from the initial assessment of $46,032. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Certain Teed Gypsum Manufacturing, INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Certain Teed Gypsum Manufacturing, INC Industry Avg
Inspections 4 2.6
Violations 6 8.0
Total Penalty $19,584 $15,763
Avg Penalty per Inspection $4,896 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Certain Teed Gypsum Manufacturing, INC, both outside NV so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($19,584 here).

Weiser Engineering/Mile High Precision INC. $19,585 CO Casting Designs, INC. (Cdi) $19,582 TX CSM Bakery Products NA, INC. $19,588 GA Fortune Plastics, INC. $19,580 CT

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Sugar Creek Packing CO. 4 insp. Washington Court House, OH Marengo Tool & Die Works, INC. 4 insp. Marengo, IL American Crystal Sugar 4 insp. Sidney, MT Anoplate Corporation 4 insp. Syracuse, NY

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

CROFT Production
Needville, TX
0 inspections $0
JW Fashion Co Inc
Rosemead, CA
0 inspections $0
Weiser Engineering/Mile High Precision INC.
North Glenn, CO
3 inspections $19,585
Casting Designs, INC. (Cdi)
Fort Worth, TX
3 inspections $19,582
CSM Bakery Products NA, INC.
Tucker, GA
3 inspections $19,588

Compare Certain Teed Gypsum Manufacturing, INC vs CROFT Production side-by-side →

What to do with this record

Use Certain Teed Gypsum Manufacturing, INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Certain Teed Gypsum Manufacturing, INC against CROFT Production, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Certain Teed Gypsum Manufacturing, INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Certain Teed Gypsum Manufacturing, INC safe to work at? ▼
Based on OSHA records, Certain Teed Gypsum Manufacturing, INC's workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 4 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Certain Teed Gypsum Manufacturing, INC have? ▼
Certain Teed Gypsum Manufacturing, INC has 6 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $19,584.
How many OSHA inspections has Certain Teed Gypsum Manufacturing, INC had? ▼
Certain Teed Gypsum Manufacturing, INC has had 4 OSHA inspections, with the first recorded on 2017-02-14 and the most recent on 2024-05-14. This averages 1.5 violations per inspection.
What is the total penalty amount for Certain Teed Gypsum Manufacturing, INC? ▼
Certain Teed Gypsum Manufacturing, INC has been assessed $19,584 in current OSHA penalties, reduced from an initial assessment of $46,032 (a 57.5% reduction).
Does Certain Teed Gypsum Manufacturing, INC have any serious or willful violations? ▼
Yes. Certain Teed Gypsum Manufacturing, INC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Certain Teed Gypsum Manufacturing, INC operate in? ▼
Certain Teed Gypsum Manufacturing, INC operates in the Manufacturing sector (NAICS code 327420). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Certain Teed Gypsum Manufacturing, INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Certain Teed Gypsum Manufacturing, INC ranks #18,006 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Certain Teed Gypsum Manufacturing, INC's safety record compare to industry average? ▼
Certain Teed Gypsum Manufacturing, INC's total OSHA penalty of $19,584 is above the Manufacturing industry average of $15,763 per employer (1.2x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, JW Fashion Co Inc in Rosemead, CA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.