PlainWorker
Employers › TX

Manufacturing · Fort Worth, TX

Casting Designs, INC. (Cdi)

According to OSHA enforcement records (2010–2026), Casting Designs, INC. (Cdi) ranks #18,007 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 3 inspections.

Top 25% by penalty75% serious
$19,582
OSHA penalties
12
Violations cited
3
OSHA inspections
#18,007
of 99,447 penalized employers

Casting Designs, INC. (Cdi) in Fort Worth, TX has been the subject of 3 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $19,582. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Casting Designs, INC. (Cdi) 3 times over 1 year - more than twice a year on average. These inspections resulted in 12 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #18,007 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Fortune Plastics, INC. in Old Saybrook, CT is another manufacturing employer with 2 OSHA inspections on record and $19,580 in current penalties.

4.0
violations per inspection
75.0%
of violations were serious
#18,007
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 12 violations across 3 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Casting Designs, INC. (Cdi) compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Casting Designs, INC. (Cdi) runs moderately above peers (1.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$19,582 Bottom 18% least affordable more affordable than 18% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Casting Designs, INC. (Cdi).

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.03.512.020.529.037.5OSHA inspectionsViolations citedAVID PALLET SERVICES…, OSHA inspections: 3 · Violations cited: 12EXIGO METAL WORKS, OSHA inspections: 3 · Violations cited: 33LOCKHEED MARTIN CORP…, OSHA inspections: 3 · Violations cited: 13KVK TECH, INC., OSHA inspections: 3 · Violations cited: 10BARRETTE OUTDOOR LIV…, OSHA inspections: 3 · Violations cited: 20SANDS LEVEL & TOOL C…, OSHA inspections: 3 · Violations cited: 8HY-VEE, INC., OSHA inspections: 3 · Violations cited: 8NUWAY TOBACCO COMPANY, OSHA inspections: 3 · Violations cited: 13J & L MANUFACTURING …, OSHA inspections: 3 · Violations cited: 36KMF, INC., OSHA inspections: 3 · Violations cited: 15TOM RICHARDS, INC., OSHA inspections: 3 · Violations cited: 8YAMASA ENTERPRISES, OSHA inspections: 3 · Violations cited: 10PAKGLOBAL, LLC, OSHA inspections: 3 · Violations cited: 11SOLUTIA INC., OSHA inspections: 3 · Violations cited: 6SUBURBAN CABINET SHO…, OSHA inspections: 3 · Violations cited: 11NILES BUILDING PRODU…, OSHA inspections: 3 · Violations cited: 5OAK RIDGE CUSTOM CAB…, OSHA inspections: 3 · Violations cited: 25TRANS FORM PLASTICS …, OSHA inspections: 3 · Violations cited: 6GENERAL PRESS & FABR…, OSHA inspections: 3 · Violations cited: 10PRECISION MASTERS IN…, OSHA inspections: 3 · Violations cited: 32Casting Designs, INC…, OSHA inspections: 3 · Violations cited: 12
Casting Designs, INC. (Cdi) has 3 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Casting Designs, INC. (Cdi) in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Casting Designs, INC. (Cdi) ranks #8,701 at $19,582 current penalty.

How Casting Designs, INC. (Cdi) Compares

Casting Designs, INC. (Cdi)'s 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2023-04-27

Last Inspection

2023-04-27

Inspection Span

1 yr

Violations / Inspection

4.0

Avg Penalty / Inspection

$6,527

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 4.0 violations per visit. That's $6,527 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$39,159

Current Penalty Amount

$19,582

Penalty Reduction

50.0%

What this shows Penalties were reduced by $19,577 from the initial assessment of $39,159. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Casting Designs, INC. (Cdi) compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Casting Designs, INC. (Cdi) Industry Avg
Inspections 3 2.6
Violations 12 8.0
Total Penalty $19,582 $15,763
Avg Penalty per Inspection $6,527 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Casting Designs, INC. (Cdi), both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($19,582 here).

Fortune Plastics, INC. $19,580 CT Certain Teed Gypsum Manufacturing, INC $19,584 NV Weiser Engineering/Mile High Precision INC. $19,585 CO Aargus Plastics, INC. $19,579 IL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Avid Pallet Services, LLC 3 insp. Beloit, WI Exigo Metal Works 3 insp. Hillside, NJ Lockheed Martin Corporation 3 insp. Palmdale, CA KVK Tech, INC. 3 insp. Newtown, PA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

CROFT Production
Needville, TX
0 inspections $0
JW Fashion Co Inc
Rosemead, CA
0 inspections $0
Fortune Plastics, INC.
Old Saybrook, CT
2 inspections $19,580
Certain Teed Gypsum Manufacturing, INC
Las Vegas, NV
4 inspections $19,584
Weiser Engineering/Mile High Precision INC.
North Glenn, CO
3 inspections $19,585

Compare Casting Designs, INC. (Cdi) vs CROFT Production side-by-side →

What to do with this record

Use Casting Designs, INC. (Cdi)'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Casting Designs, INC. (Cdi) against CROFT Production, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Casting Designs, INC. (Cdi)'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Casting Designs, INC. (Cdi) safe to work at? ▼
Based on OSHA records, Casting Designs, INC. (Cdi)'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 3 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Casting Designs, INC. (Cdi) have? ▼
Casting Designs, INC. (Cdi) has 12 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $19,582.
How many OSHA inspections has Casting Designs, INC. (Cdi) had? ▼
Casting Designs, INC. (Cdi) has had 3 OSHA inspections, with the first recorded on 2023-04-27 and the most recent on 2023-04-27. This averages 4.0 violations per inspection.
What is the total penalty amount for Casting Designs, INC. (Cdi)? ▼
Casting Designs, INC. (Cdi) has been assessed $19,582 in current OSHA penalties, reduced from an initial assessment of $39,159 (a 50.0% reduction).
Does Casting Designs, INC. (Cdi) have any serious or willful violations? ▼
Yes. Casting Designs, INC. (Cdi) has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Casting Designs, INC. (Cdi) operate in? ▼
Casting Designs, INC. (Cdi) operates in the Manufacturing sector (NAICS code 327999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Casting Designs, INC. (Cdi) rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Casting Designs, INC. (Cdi) ranks #18,007 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Casting Designs, INC. (Cdi)'s safety record compare to industry average? ▼
Casting Designs, INC. (Cdi)'s total OSHA penalty of $19,582 is above the Manufacturing industry average of $15,763 per employer (1.2x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fortune Plastics, INC. in Old Saybrook, CT is a similar manufacturing employer with $19,580 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.