PlainWorker
Employers › WA

Professional & Technical Services · Seattle, WA

CDM & Constructors INC

According to OSHA enforcement records (2010–2026), CDM & Constructors INC has a relatively clean safety record: 0 violations across 3 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
3
OSHA inspections

CDM & Constructors INC in Seattle, WA has been the subject of 3 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected CDM & Constructors INC 3 times over 1 year - more than twice a year on average. None of these inspections resulted in a citation. Against the Professional & Technical Services industry average of 1 inspections per employer, this runs far above peers (5.2x the sector average) on inspection frequency. For comparison, Diamondback E&P LLC in Midland, TX is another professional & technical services employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 3 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Professional & Technical Services employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is CDM & Constructors INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.002.95.88.711.6OSHA inspectionsViolations citedFELTS SIGN COMPANY, OSHA inspections: 3 · Violations cited: 3BRITTEN INC, OSHA inspections: 3 · Violations cited: 0LOGISTICS INSIGHT CORP, OSHA inspections: 3 · Violations cited: 9SRI INTERNATIONAL, OSHA inspections: 3 · Violations cited: 6FRAMATOME INC., OSHA inspections: 3 · Violations cited: 6CLEAN HARBORS ENVIRO…, OSHA inspections: 3 · Violations cited: 4CALSPAN CORPORATION, OSHA inspections: 3 · Violations cited: 1U.S. ARMY CORPS OF E…, OSHA inspections: 3 · Violations cited: 11PENSKE LOGISTICS LLC, OSHA inspections: 3 · Violations cited: 10NYCDCWP BUREAU OF WE…, OSHA inspections: 3 · Violations cited: 2ALASKAN OBSERVERS, I…, OSHA inspections: 3 · Violations cited: 0CONSTRUCTION MANAGEM…, OSHA inspections: 3 · Violations cited: 0BMS LOGISTICS, OSHA inspections: 3 · Violations cited: 6STAGE HOUSE, OSHA inspections: 3 · Violations cited: 7GENENTECH, OSHA inspections: 3 · Violations cited: 0MORELLO CONSTRUCTION…, OSHA inspections: 3 · Violations cited: 7TRIANGLE DISTRIBUTIO…, OSHA inspections: 3 · Violations cited: 2SYNCREON AMERICA INC, OSHA inspections: 3 · Violations cited: 1SUNY STONY BROOK DLAR, OSHA inspections: 3 · Violations cited: 2MENLO LOGISTICS INC, OSHA inspections: 3 · Violations cited: 0CDM & Constructors INC, OSHA inspections: 3 · Violations cited: 0
CDM & Constructors INC has 3 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Professional & Technical Services peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How CDM & Constructors INC Compares

3 OSHA inspections on record for CDM & Constructors INC in Seattle, WA, zero violations cited, a cleaner record than the Professional & Technical Services sector average of 1.2 violations per employer.

No OSHA penalty has been assessed against CDM & Constructors INC to date. The Professional & Technical Services sector average runs $1,358 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2013-11-14

Last Inspection

2014-04-24

Inspection Span

1 yr

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$2,331

What this shows 3 inspections over 1 year, averaging 0.0 violations per visit. That's $0 per inspection vs. the Professional & Technical Services average of $2,331.

Industry Safety Context: Professional & Technical Services

How CDM & Constructors INC compares to the Professional & Technical Services sector, which has 3,597 employers tracked by PlainWorker.

Metric CDM & Constructors INC Industry Avg
Inspections 3 0.6
Violations 0 1.2
Total Penalty $0 $1,358
Avg Penalty per Inspection $0 $2,331
View all 3,597 employers in Professional & Technical Services →

Nationwide Professional & Technical Services peers with similar penalties or inspection counts

Two OSHA-record peer sets for CDM & Constructors INC, both outside WA so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Felts Sign Company 3 insp. Henrico, VA Britten INC 3 insp. Traverse City, MI Logistics Insight CORP 3 insp. Flint, MI Sri International 3 insp. Menlo Park, CA

Nearby & Similar Employers in Professional & Technical Services

Showing 5 of 3596 other employers tracked in this sector.

U.S. Geological Survey Western Fisheries Research
Seattle, WA
2 inspections $0
Envirotest, LTD
Corpus Christi, TX
2 inspections $0
County of Warren Engineering Department
Belvidere, NJ
2 inspections $0
McMinn County - Airport
Athens, TN
2 inspections $0
Diamondback E&P LLC
Midland, TX
2 inspections $0

Compare CDM & Constructors INC vs U.S. Geological Survey Western Fisheries Research side-by-side →

What to do with this record

Use CDM & Constructors INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare CDM & Constructors INC against U.S. Geological Survey Western Fisheries Research, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether CDM & Constructors INC's inspection and penalty record is typical for Professional & Technical Services or an outlier against the sector's own average. View the Professional & Technical Services sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is CDM & Constructors INC safe to work at? ▼
Based on OSHA records, CDM & Constructors INC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 3 inspections. Compared to Professional & Technical Services industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does CDM & Constructors INC have? ▼
CDM & Constructors INC has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has CDM & Constructors INC had? ▼
CDM & Constructors INC has had 3 OSHA inspections, with the first recorded on 2013-11-14 and the most recent on 2014-04-24. This averages 0.0 violations per inspection.
What is the total penalty amount for CDM & Constructors INC? ▼
CDM & Constructors INC has been assessed $0 in current OSHA penalties.
What industry does CDM & Constructors INC operate in? ▼
CDM & Constructors INC operates in the Professional & Technical Services sector (NAICS code 541330). This industry has 3,597 employers tracked by PlainWorker, with 2,095 total OSHA inspections and $4.88M in cumulative penalties.
How does CDM & Constructors INC's safety record compare to industry average? ▼
CDM & Constructors INC's total OSHA penalty of $0 is below the Professional & Technical Services industry average of $1,358 per employer. The employer has 3 inspections compared to the industry average of 0.6 per employer. For a direct comparison, Diamondback E&P LLC in Midland, TX is a similar professional & technical services employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.