PlainWorker
Employers › CT

Manufacturing · East Windsor, CT

Camm Metals, INC.

According to OSHA enforcement records (2010–2026), Camm Metals, INC. ranks #28,352 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 2 inspections.

Upper half by penalty86% serious
$12,722
OSHA penalties
14
Violations cited
2
OSHA inspections
#28,352
of 99,447 penalized employers

Camm Metals, INC. in East Windsor, CT has been the subject of 2 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $12,722. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Camm Metals, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 14 violations, averaging 7.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #28,352 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Magnus, LLC in Fremont, NE is another manufacturing employer with 2 OSHA inspections on record and $12,720 in current penalties.

7.0
violations per inspection
85.7%
of violations were serious
#28,352
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 14 violations across 2 OSHA inspections (7.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Camm Metals, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Camm Metals, INC. sits roughly in line with peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$12,722 Bottom 29% least affordable more affordable than 29% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Camm Metals, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0011223344OSHA inspectionsViolations citedDIPEN M SHAH, OSHA inspections: 2 · Violations cited: 29ALL QUALITY MACHININ…, OSHA inspections: 2 · Violations cited: 42TENNECO AUTOMOTIVE O…, OSHA inspections: 2 · Violations cited: 34TRELLEBORG WHEEL SYS…, OSHA inspections: 2 · Violations cited: 8GLIDEWELL LABORATORIES, OSHA inspections: 2 · Violations cited: 2HUNT REFINING COMPANY, OSHA inspections: 2 · Violations cited: 5SS INDUSTRIES HOLDIN…, OSHA inspections: 2 · Violations cited: 14PRL ALUMINUM INC., OSHA inspections: 2 · Violations cited: 7SUSQUEHANNA GLASS CO…, OSHA inspections: 2 · Violations cited: 15GEORGETOWN WOOD AND …, OSHA inspections: 2 · Violations cited: 12ADVANCED CONCRETE SY…, OSHA inspections: 2 · Violations cited: 5GKN AEROSPACE NORTH …, OSHA inspections: 2 · Violations cited: 10BIG RIVER CAST STONE, OSHA inspections: 2 · Violations cited: 20WALMAN OPTICAL COMPANY, OSHA inspections: 2 · Violations cited: 9BROTHERS INTERNATION…, OSHA inspections: 2 · Violations cited: 10INTERSTATE PAPER LLC, OSHA inspections: 2 · Violations cited: 14TERMAX CORPORATION, OSHA inspections: 2 · Violations cited: 3QUALTOOL, INC., OSHA inspections: 2 · Violations cited: 16BCS MANUFACTURING LLC, OSHA inspections: 2 · Violations cited: 40VALERO MCKEE REFINERY, OSHA inspections: 2 · Violations cited: 14Camm Metals, INC., OSHA inspections: 2 · Violations cited: 14
Camm Metals, INC. has 2 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Camm Metals, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Camm Metals, INC. ranks #13,159 at $12,722 current penalty.

How Camm Metals, INC. Compares

Camm Metals, INC.'s 7.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-09-22

Last Inspection

2016-10-11

Inspection Span

1 yr

Violations / Inspection

7.0

Avg Penalty / Inspection

$6,361

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 7.0 violations per visit. That's $6,361 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

85.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

14.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$18,173

Current Penalty Amount

$12,722

Penalty Reduction

30.0%

What this shows Penalties were reduced by $5,451 from the initial assessment of $18,173. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Camm Metals, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Camm Metals, INC. Industry Avg
Inspections 2 2.6
Violations 14 8.0
Total Penalty $12,722 $15,763
Avg Penalty per Inspection $6,361 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Camm Metals, INC., both outside CT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($12,722 here).

Power Recycling, INC. $12,723 NY Chicago Laminating, INC. $12,720 IL Magnus, LLC $12,720 NE Shiloh Industries, INC. $12,720 GA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Dipen M Shah 2 insp. Baldwyn, MS All Quality Machining & Finishing, LLC 2 insp. Christiana, PA Tenneco Automotive Operating Company INC. 2 insp. Marshall, MI Trelleborg Wheel Systems Americas, INC. 2 insp. Charles City, IA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Power Recycling, INC.
Amsterdam, NY
2 inspections $12,723
Chicago Laminating, INC.
Arlington Heights, IL
3 inspections $12,720
Magnus, LLC
Fremont, NE
2 inspections $12,720
Shiloh Industries, INC.
Pendergrass, GA
3 inspections $12,720
Sensient Natural Ingredients, LLC
Livingston, CA
10 inspections $12,720

Compare Camm Metals, INC. vs Power Recycling, INC. side-by-side →

What to do with this record

Use Camm Metals, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Camm Metals, INC. against Power Recycling, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Camm Metals, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Camm Metals, INC. safe to work at? ▼
Based on OSHA records, Camm Metals, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 2 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Camm Metals, INC. have? ▼
Camm Metals, INC. has 14 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $12,722.
How many OSHA inspections has Camm Metals, INC. had? ▼
Camm Metals, INC. has had 2 OSHA inspections, with the first recorded on 2016-09-22 and the most recent on 2016-10-11. This averages 7.0 violations per inspection.
What is the total penalty amount for Camm Metals, INC.? ▼
Camm Metals, INC. has been assessed $12,722 in current OSHA penalties, reduced from an initial assessment of $18,173 (a 30.0% reduction).
Does Camm Metals, INC. have any serious or willful violations? ▼
Yes. Camm Metals, INC. has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Camm Metals, INC. operate in? ▼
Camm Metals, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Camm Metals, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Camm Metals, INC. ranks #28,352 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Camm Metals, INC.'s safety record compare to industry average? ▼
Camm Metals, INC.'s total OSHA penalty of $12,722 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Magnus, LLC in Fremont, NE is a similar manufacturing employer with $12,720 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.