PlainWorker
Employers › VA

Manufacturing · Lorton, VA

C & C Custom Woodworking

According to OSHA enforcement records (2010–2026), C & C Custom Woodworking ranks #54,171 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 16 violations across 2 inspections.

Lower half by penalty81% serious
$5,200
OSHA penalties
16
Violations cited
2
OSHA inspections
#54,171
of 99,447 penalized employers

C & C Custom Woodworking in Lorton, VA has been the subject of 2 OSHA workplace inspections and 16 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,200. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected C & C Custom Woodworking 2 times over 1 year - more than twice a year on average. These inspections resulted in 16 violations, averaging 8.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #54,171 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Shannon Enterprises of W.N.y. INC. in North Tonawanda, NY is another manufacturing employer with 3 OSHA inspections on record and $5,200 in current penalties.

8.0
violations per inspection
81.3%
of violations were serious
#54,171
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 16 violations across 2 OSHA inspections (8.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How C & C Custom Woodworking compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows C & C Custom Woodworking runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,200 Top 46% most affordable more affordable than 54% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is C & C Custom Woodworking.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.713.326.038.651.3OSHA inspectionsViolations citedWHITESELL CORPORATION, OSHA inspections: 2 · Violations cited: 23INDUSTRIAL PACKAGING…, OSHA inspections: 2 · Violations cited: 31OHIO GASKET & SHIM C…, OSHA inspections: 2 · Violations cited: 16HARMAC REBAR & STEEL…, OSHA inspections: 2 · Violations cited: 7PINTER MEMORIALS INC, OSHA inspections: 2 · Violations cited: 32DICAPERL MINERALS CO…, OSHA inspections: 2 · Violations cited: 19HILLTOP SLATE, INC., OSHA inspections: 2 · Violations cited: 25G.A.L. MANUFACTURING…, OSHA inspections: 2 · Violations cited: 18PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5DAVID ELLIOT POULTRY…, OSHA inspections: 2 · Violations cited: 14RELIANCE PRECAST SYS…, OSHA inspections: 2 · Violations cited: 25HIXSON LUMBER COMPAN…, OSHA inspections: 2 · Violations cited: 12GGI GLASS DISTRIBUTO…, OSHA inspections: 2 · Violations cited: 5MERLIN INDUSTRIES INC., OSHA inspections: 2 · Violations cited: 15THE BREWER COMPANY, OSHA inspections: 2 · Violations cited: 19CARLEX GLASS AMERICA…, OSHA inspections: 2 · Violations cited: 3EISENBACK EQUIPMENT …, OSHA inspections: 2 · Violations cited: 49SIMMONS CUSTOM RIGGING, OSHA inspections: 2 · Violations cited: 19CP MANUFACTURING, INC., OSHA inspections: 2 · Violations cited: 6SCHENCK PROCESS, LLC, OSHA inspections: 2 · Violations cited: 7C & C Custom Woodwor…, OSHA inspections: 2 · Violations cited: 16
C & C Custom Woodworking has 2 OSHA inspections on record and 16 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

C & C Custom Woodworking in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, C & C Custom Woodworking ranks #22,660 at $5,200 current penalty.

How C & C Custom Woodworking Compares

C & C Custom Woodworking's 8.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-06-30

Last Inspection

2012-03-14

Inspection Span

1 yr

Violations / Inspection

8.0

Avg Penalty / Inspection

$2,600

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 8.0 violations per visit. That's $2,600 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

13

Serious

81.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

18.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,200

Current Penalty Amount

$5,200

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How C & C Custom Woodworking compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric C & C Custom Woodworking Industry Avg
Inspections 2 2.6
Violations 16 8.0
Total Penalty $5,200 $15,763
Avg Penalty per Inspection $2,600 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for C & C Custom Woodworking, both outside VA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,200 here).

Eagle Precision Tooling, INC. $5,200 PA Marathon Petroleum $5,200 OH Shannon Enterprises of W.N.y. INC. $5,200 NY A & B Welding, LLC $5,200 ME

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Whitesell Corporation 2 insp. Tuscumbia, AL Industrial Packaging Corporation 2 insp. Arcadia, WI Ohio Gasket & Shim Company 2 insp. Akron, OH Harmac Rebar & Steel CORP 2 insp. Fryeburg, ME

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Eagle Precision Tooling, INC.
Erie, PA
2 inspections $5,200
Marathon Petroleum
Canton, OH
2 inspections $5,200
Shannon Enterprises of W.N.y. INC.
North Tonawanda, NY
3 inspections $5,200
A & B Welding, LLC
Union, ME
2 inspections $5,200
Abbott-Action, INC.
Canton, MA
2 inspections $5,200

Compare C & C Custom Woodworking vs Eagle Precision Tooling, INC. side-by-side →

What to do with this record

Use C & C Custom Woodworking's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare C & C Custom Woodworking against Eagle Precision Tooling, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether C & C Custom Woodworking's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is C & C Custom Woodworking safe to work at? ▼
Based on OSHA records, C & C Custom Woodworking's workplace safety record is concerning, with multiple serious compliance issues. The employer has 16 violations across 2 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does C & C Custom Woodworking have? ▼
C & C Custom Woodworking has 16 OSHA violations on record, including 13 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,200.
How many OSHA inspections has C & C Custom Woodworking had? ▼
C & C Custom Woodworking has had 2 OSHA inspections, with the first recorded on 2011-06-30 and the most recent on 2012-03-14. This averages 8.0 violations per inspection.
What is the total penalty amount for C & C Custom Woodworking? ▼
C & C Custom Woodworking has been assessed $5,200 in current OSHA penalties.
Does C & C Custom Woodworking have any serious or willful violations? ▼
Yes. C & C Custom Woodworking has 13 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does C & C Custom Woodworking operate in? ▼
C & C Custom Woodworking operates in the Manufacturing sector (NAICS code 321999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does C & C Custom Woodworking rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, C & C Custom Woodworking ranks #54,171 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does C & C Custom Woodworking's safety record compare to industry average? ▼
C & C Custom Woodworking's total OSHA penalty of $5,200 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Shannon Enterprises of W.N.y. INC. in North Tonawanda, NY is a similar manufacturing employer with $5,200 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.