PlainWorker
Employers › RI

Manufacturing · North Kingstown, RI

Bel Air Finishing Supply CORP.

According to OSHA enforcement records (2010–2026), Bel Air Finishing Supply CORP. ranks #81,749 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 2 inspections.

Lower half by penalty0% serious
$1,462
OSHA penalties
6
Violations cited
2
OSHA inspections
#81,749
of 99,447 penalized employers

Bel Air Finishing Supply CORP. in North Kingstown, RI has been the subject of 2 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,462. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Bel Air Finishing Supply CORP. 2 times over 1 year - more than twice a year on average. These inspections resulted in 6 violations, averaging 3.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #81,749 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, NTK Precision Axle in Frankfort, IN is another manufacturing employer with 2 OSHA inspections on record and $1,462 in current penalties.

3.0
violations per inspection
0.0%
of violations were serious
#81,749
of 99,447 penalized employers

Compliance score

F 46/100
  • F OSHA safety compliance: 6 violations across 2 OSHA inspections (3.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Bel Air Finishing Supply CORP. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Bel Air Finishing Supply CORP. runs well below peers (0.09x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,462 Top 18% most affordable more affordable than 82% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Bel Air Finishing Supply CORP..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.02.112.52333.443.9OSHA inspectionsViolations citedSUPREME OIL COMPANY …, OSHA inspections: 2 · Violations cited: 33FOXWORTH-GALBRAITH L…, OSHA inspections: 2 · Violations cited: 4KESSLER THERMOMETER …, OSHA inspections: 2 · Violations cited: 22SESCO TERMINAL CORPO…, OSHA inspections: 2 · Violations cited: 13SAFAS CORPORATION, OSHA inspections: 2 · Violations cited: 35STARWEST BOTANICALS,…, OSHA inspections: 2 · Violations cited: 21THE SHERWIN-WILLIAMS…, OSHA inspections: 2 · Violations cited: 11FRIESLANDCAMPINA ING…, OSHA inspections: 2 · Violations cited: 15ADVANEX AMERICAS, INC., OSHA inspections: 2 · Violations cited: 10SERTA SIMMONS BEDDIN…, OSHA inspections: 2 · Violations cited: 5SPRINGFIELD WELDING …, OSHA inspections: 2 · Violations cited: 15J & O PLASTICS INC., OSHA inspections: 2 · Violations cited: 28HAGERTY BROTHERS COM…, OSHA inspections: 2 · Violations cited: 40SPIRAL STAIRS OF AME…, OSHA inspections: 2 · Violations cited: 42GC PACKAGING LLC, OSHA inspections: 2 · Violations cited: 27SUMMIT TOOL COMPANY, OSHA inspections: 2 · Violations cited: 23NATIONAL BEEF PACKIN…, OSHA inspections: 2 · Violations cited: 7IO7 MANAGEMENT, INC., OSHA inspections: 2 · Violations cited: 11SMARDT CHILLERS, INC., OSHA inspections: 2 · Violations cited: 4WIXON INC., OSHA inspections: 2 · Violations cited: 5Bel Air Finishing Su…, OSHA inspections: 2 · Violations cited: 6
Bel Air Finishing Supply CORP. has 2 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Bel Air Finishing Supply CORP. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Bel Air Finishing Supply CORP. ranks #31,170 at $1,462 current penalty.

How Bel Air Finishing Supply CORP. Compares

Bel Air Finishing Supply CORP.'s 3.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.09x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2024-10-24

Last Inspection

2024-11-21

Inspection Span

1 yr

Violations / Inspection

3.0

Avg Penalty / Inspection

$731

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 3.0 violations per visit. That's $731 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$6,737

Current Penalty Amount

$1,462

Penalty Reduction

78.3%

What this shows Penalties were reduced by $5,275 from the initial assessment of $6,737. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Bel Air Finishing Supply CORP. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Bel Air Finishing Supply CORP. Industry Avg
Inspections 2 2.6
Violations 6 8.0
Total Penalty $1,462 $15,763
Avg Penalty per Inspection $731 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Bel Air Finishing Supply CORP., both outside RI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,462 here).

NTK Precision Axle $1,462 IN Fountain Foundry Corporation $1,463 IN Integra Ci INC. $1,463 PR Blueprint Robotics, INC $1,463 MD

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Supreme Oil Company INC. 2 insp. Englewood, NJ Foxworth-Galbraith Lumber Company 2 insp. Killeen, TX Kessler Thermometer CORP. 2 insp. West Babylon, NY Sesco Terminal Corporation 2 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

NTK Precision Axle
Frankfort, IN
2 inspections $1,462
Quality Air of America
Hollywood, FL
0 inspections $0
Fountain Foundry Corporation
Veedersburg, IN
2 inspections $1,463
Integra Ci INC.
Anasco, PR
3 inspections $1,463
Blueprint Robotics, INC
Baltimore, MD
2 inspections $1,463

Compare Bel Air Finishing Supply CORP. vs NTK Precision Axle side-by-side →

What to do with this record

Use Bel Air Finishing Supply CORP.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Bel Air Finishing Supply CORP. against NTK Precision Axle, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Bel Air Finishing Supply CORP.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Bel Air Finishing Supply CORP. safe to work at? ▼
Based on OSHA records, Bel Air Finishing Supply CORP.'s workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Bel Air Finishing Supply CORP. have? ▼
Bel Air Finishing Supply CORP. has 6 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,462.
How many OSHA inspections has Bel Air Finishing Supply CORP. had? ▼
Bel Air Finishing Supply CORP. has had 2 OSHA inspections, with the first recorded on 2024-10-24 and the most recent on 2024-11-21. This averages 3.0 violations per inspection.
What is the total penalty amount for Bel Air Finishing Supply CORP.? ▼
Bel Air Finishing Supply CORP. has been assessed $1,462 in current OSHA penalties, reduced from an initial assessment of $6,737 (a 78.3% reduction).
What industry does Bel Air Finishing Supply CORP. operate in? ▼
Bel Air Finishing Supply CORP. operates in the Manufacturing sector (NAICS code 332813). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Bel Air Finishing Supply CORP. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Bel Air Finishing Supply CORP. ranks #81,749 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Bel Air Finishing Supply CORP.'s safety record compare to industry average? ▼
Bel Air Finishing Supply CORP.'s total OSHA penalty of $1,462 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, NTK Precision Axle in Frankfort, IN is a similar manufacturing employer with $1,462 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.