PlainWorker
Employers › WI

Manufacturing · Racine, WI

Beck Aluminum Alloys, LTD.

According to OSHA enforcement records (2010–2026), Beck Aluminum Alloys, LTD. ranks #3,436 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 28 violations across 2 inspections.

Top 5% by penalty86% serious
$65,759
OSHA penalties
28
Violations cited
2
OSHA inspections
#3,436
of 99,447 penalized employers

Beck Aluminum Alloys, LTD. in Racine, WI has been the subject of 2 OSHA workplace inspections and 28 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $65,759. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Beck Aluminum Alloys, LTD. 2 times over 1 year - more than twice a year on average. These inspections turned up 28 violations, averaging 14.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #3,436 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 24 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Mullican Flooring, LP in Norton, VA is another manufacturing employer with 3 OSHA inspections on record and $65,834 in current penalties.

14.0
violations per inspection
85.7%
of violations were serious
#3,436
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 28 violations across 2 OSHA inspections (14.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Beck Aluminum Alloys, LTD. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Beck Aluminum Alloys, LTD. runs well above peers (4.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$65,759 Bottom 3% least affordable more affordable than 3% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($65,759) is well above this band, the chart's rightmost open-ended bucket. This employer: $65,759 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Beck Aluminum Alloys, LTD..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0017.134.151.268.2OSHA inspectionsViolations citedSTEEL BUILDING COMPO…, OSHA inspections: 2 · Violations cited: 20ROSS CASTING & INNOV…, OSHA inspections: 2 · Violations cited: 20POWER STOP, LLC, OSHA inspections: 2 · Violations cited: 14VALENT AEROSTRUCTURE…, OSHA inspections: 2 · Violations cited: 1MATERIAL CONTROL SYS…, OSHA inspections: 2 · Violations cited: 1BMW MANUFACTURING CO…, OSHA inspections: 2 · Violations cited: 43STRUCTURAL WOOD SYST…, OSHA inspections: 2 · Violations cited: 22MAURER AND SHEPHERD,…, OSHA inspections: 2 · Violations cited: 65DAC AEROSOL & LIQUID…, OSHA inspections: 2 · Violations cited: 39MIDDLETON MEMORIALS …, OSHA inspections: 2 · Violations cited: 20WALLACE SILVERSMITHS…, OSHA inspections: 2 · Violations cited: 24OLD D'S APPAREL INC, OSHA inspections: 2 · Violations cited: 14ESTERLINE DEFENSE TE…, OSHA inspections: 2 · Violations cited: 5LITHION BATTERY INC., OSHA inspections: 2 · Violations cited: 4CST INDUSTRIES, INC, OSHA inspections: 2 · Violations cited: 37SUNSET PRINTING & EN…, OSHA inspections: 2 · Violations cited: 10RIMCO PLASTICS CORP., OSHA inspections: 2 · Violations cited: 12MULLICAN FLOORING LP, OSHA inspections: 2 · Violations cited: 6INTERCONTINENTAL ENG…, OSHA inspections: 2 · Violations cited: 5ASTRO PLASTIC CONTAI…, OSHA inspections: 2 · Violations cited: 11Beck Aluminum Alloys…, OSHA inspections: 2 · Violations cited: 28
Beck Aluminum Alloys, LTD. has 2 OSHA inspections on record and 28 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Beck Aluminum Alloys, LTD. in the Manufacturing enforcement ledger

Manufacturing sector: Beck Aluminum Alloys, LTD. is the #1,769 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($65,759).

How Beck Aluminum Alloys, LTD. Compares

Beck Aluminum Alloys, LTD.'s 14.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (4.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-09-18

Last Inspection

2014-02-21

Inspection Span

1 yr

Violations / Inspection

14.0

Avg Penalty / Inspection

$32,880

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 14.0 violations per visit. That's $32,880 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

24

Serious

85.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

14.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$152,712

Current Penalty Amount

$65,759

Penalty Reduction

56.9%

What this shows Penalties were reduced by $86,953 from the initial assessment of $152,712. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Beck Aluminum Alloys, LTD. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Beck Aluminum Alloys, LTD. Industry Avg
Inspections 2 2.6
Violations 28 8.0
Total Penalty $65,759 $15,763
Avg Penalty per Inspection $32,880 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Beck Aluminum Alloys, LTD., both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($65,759 here).

Chicago Powdered Metal Products CO. $65,764 IL Meyer Corporation, U.S. $65,775 CA Qycell Corporation $65,705 CA United Window & Door Manufacturing, INC. $65,820 NJ

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Steel Building Components, LLC 2 insp. Edison, NJ Ross Casting & Innovation, LLC 2 insp. Sidney, OH Power Stop, LLC 2 insp. MC Cook, IL Valent Aerostructures, LLC 2 insp. Fredonia, KS

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Chicago Powdered Metal Products CO.
Schiller Park, IL
6 inspections $65,764
Meyer Corporation, U.S.
Fairfield, CA
2 inspections $65,775
Qycell Corporation
Ontario, CA
5 inspections $65,705
United Window & Door Manufacturing, INC.
Springfield, NJ
3 inspections $65,820
Mullican Flooring, LP
Norton, VA
3 inspections $65,834

Compare Beck Aluminum Alloys, LTD. vs Chicago Powdered Metal Products CO. side-by-side →

What to do with this record

Use Beck Aluminum Alloys, LTD.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Beck Aluminum Alloys, LTD. against Chicago Powdered Metal Products CO., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Beck Aluminum Alloys, LTD.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Beck Aluminum Alloys, LTD. safe to work at? ▼
Based on OSHA records, Beck Aluminum Alloys, LTD.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 28 violations across 2 inspections, including 24 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Beck Aluminum Alloys, LTD. have? ▼
Beck Aluminum Alloys, LTD. has 28 OSHA violations on record, including 24 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $65,759.
How many OSHA inspections has Beck Aluminum Alloys, LTD. had? ▼
Beck Aluminum Alloys, LTD. has had 2 OSHA inspections, with the first recorded on 2013-09-18 and the most recent on 2014-02-21. This averages 14.0 violations per inspection.
What is the total penalty amount for Beck Aluminum Alloys, LTD.? ▼
Beck Aluminum Alloys, LTD. has been assessed $65,759 in current OSHA penalties, reduced from an initial assessment of $152,712 (a 56.9% reduction).
Does Beck Aluminum Alloys, LTD. have any serious or willful violations? ▼
Yes. Beck Aluminum Alloys, LTD. has 24 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Beck Aluminum Alloys, LTD. operate in? ▼
Beck Aluminum Alloys, LTD. operates in the Manufacturing sector (NAICS code 331314). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Beck Aluminum Alloys, LTD. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Beck Aluminum Alloys, LTD. ranks #3,436 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Beck Aluminum Alloys, LTD.'s safety record compare to industry average? ▼
Beck Aluminum Alloys, LTD.'s total OSHA penalty of $65,759 is above the Manufacturing industry average of $15,763 per employer (4.2x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Mullican Flooring, LP in Norton, VA is a similar manufacturing employer with $65,834 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.