PlainWorker
Employers › VA

Manufacturing · Topping, VA

Atlantic Metal Products INC

According to OSHA enforcement records (2010–2026), Atlantic Metal Products INC ranks #95,521 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 11 violations across 2 inspections.

Lower half by penalty9% serious
$315
OSHA penalties
11
Violations cited
2
OSHA inspections
#95,521
of 99,447 penalized employers

Atlantic Metal Products INC in Topping, VA has been the subject of 2 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $315. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Atlantic Metal Products INC 2 times over 1 year - more than twice a year on average. These inspections resulted in 11 violations, averaging 5.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #95,521 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Conveyor Sales Company in Phoenix, AZ is another manufacturing employer with 2 OSHA inspections on record and $315 in current penalties.

5.5
violations per inspection
9.1%
of violations were serious
#95,521
of 99,447 penalized employers

Compliance score

F 10/100
  • F OSHA safety compliance: 11 violations across 2 OSHA inspections (5.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Atlantic Metal Products INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Atlantic Metal Products INC runs well below peers (0.02x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$315 Top 4% most affordable more affordable than 96% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Atlantic Metal Products INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.519.83958.377.5OSHA inspectionsViolations citedKRISPY KREME DOUGHNU…, OSHA inspections: 2 · Violations cited: 16HORN PACKAGING CORPO…, OSHA inspections: 2 · Violations cited: 21METAL CULVERTS, INC., OSHA inspections: 2 · Violations cited: 9MAVERICK ARMS INC., OSHA inspections: 2 · Violations cited: 27HAILO WIND SYSTEMS, …, OSHA inspections: 2 · Violations cited: 15UNITEX BAG, INC., OSHA inspections: 2 · Violations cited: 74BAKER MANUFACTURING …, OSHA inspections: 2 · Violations cited: 14NEFAB PACKAGING WEST…, OSHA inspections: 2 · Violations cited: 4CLEVELAND TRACK MATE…, OSHA inspections: 2 · Violations cited: 8PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5FLORIKAN ESA, LLC, OSHA inspections: 2 · Violations cited: 27RANDALL FOODS, INC., OSHA inspections: 2 · Violations cited: 9STEWART SYSTEMS BAKI…, OSHA inspections: 2 · Violations cited: 10US COSMETICS CORPORA…, OSHA inspections: 2 · Violations cited: 33CHEP SERVICES, LLC, OSHA inspections: 2 · Violations cited: 4JOE N. MILES & SONS,…, OSHA inspections: 2 · Violations cited: 26ENSIGHT SOLUTIONS LLC, OSHA inspections: 2 · Violations cited: 12INTERPRESS TECHNOLOG…, OSHA inspections: 2 · Violations cited: 4BARDANE MFG. CO., OSHA inspections: 2 · Violations cited: 15LEONI WIRE, INC., OSHA inspections: 2 · Violations cited: 6Atlantic Metal Produ…, OSHA inspections: 2 · Violations cited: 11
Atlantic Metal Products INC has 2 OSHA inspections on record and 11 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Atlantic Metal Products INC in the Manufacturing enforcement ledger

Manufacturing sector: Atlantic Metal Products INC is the #34,464 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($315).

How Atlantic Metal Products INC Compares

Atlantic Metal Products INC's 5.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.02x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-04-04

Last Inspection

2013-04-04

Inspection Span

1 yr

Violations / Inspection

5.5

Avg Penalty / Inspection

$158

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 5.5 violations per visit. That's $158 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

9.1% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

10

Other-Than-Serious

90.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$315

Current Penalty Amount

$315

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Atlantic Metal Products INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Atlantic Metal Products INC Industry Avg
Inspections 2 2.6
Violations 11 8.0
Total Penalty $315 $15,763
Avg Penalty per Inspection $158 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Atlantic Metal Products INC, both outside VA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($315 here).

Chevron Richmond Refinery $315 CA Bimbo Bakeries USA $315 CA Conveyor Sales Company $315 AZ Rock Creek Barrels, INC. $315 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Krispy Kreme Doughnut Corporation 2 insp. West Allis, WI Horn Packaging Corporation 2 insp. Lancaster, MA Metal Culverts, INC. 2 insp. Havana, IL Maverick Arms INC. 2 insp. Eagle Pass, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Chevron Richmond Refinery
Richmond, CA
2 inspections $315
Bimbo Bakeries USA
Fontana, CA
2 inspections $315
Conveyor Sales Company
Phoenix, AZ
2 inspections $315
Rock Creek Barrels, INC.
Albany, WI
3 inspections $315
Teemark Manufacturing INC
Aitkin, MN
2 inspections $315

Compare Atlantic Metal Products INC vs Chevron Richmond Refinery side-by-side →

What to do with this record

Use Atlantic Metal Products INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Atlantic Metal Products INC against Chevron Richmond Refinery, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Atlantic Metal Products INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Atlantic Metal Products INC safe to work at? ▼
Based on OSHA records, Atlantic Metal Products INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 11 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Atlantic Metal Products INC have? ▼
Atlantic Metal Products INC has 11 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $315.
How many OSHA inspections has Atlantic Metal Products INC had? ▼
Atlantic Metal Products INC has had 2 OSHA inspections, with the first recorded on 2013-04-04 and the most recent on 2013-04-04. This averages 5.5 violations per inspection.
What is the total penalty amount for Atlantic Metal Products INC? ▼
Atlantic Metal Products INC has been assessed $315 in current OSHA penalties.
Does Atlantic Metal Products INC have any serious or willful violations? ▼
Yes. Atlantic Metal Products INC has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Atlantic Metal Products INC operate in? ▼
Atlantic Metal Products INC operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Atlantic Metal Products INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Atlantic Metal Products INC ranks #95,521 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Atlantic Metal Products INC's safety record compare to industry average? ▼
Atlantic Metal Products INC's total OSHA penalty of $315 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Conveyor Sales Company in Phoenix, AZ is a similar manufacturing employer with $315 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.