PlainWorker
Employers › MI

Manufacturing · Chesterfield, MI

Anderson-Cook INC - LM Gear

According to OSHA enforcement records (2010–2026), Anderson-Cook INC - LM Gear ranks #3,934 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 49 violations across 6 inspections.

Top 5% by penalty27% serious
$59,825
OSHA penalties
49
Violations cited
6
OSHA inspections
#3,934
of 99,447 penalized employers

Anderson-Cook INC - LM Gear in Chesterfield, MI has been the subject of 6 OSHA workplace inspections and 49 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $59,825. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Anderson-Cook INC - LM Gear 6 times over 8 years, roughly once every couple of years. These inspections resulted in 49 violations, averaging 8.2 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #3,934 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.3x the sector average) on inspection frequency. For comparison, Prophet Gear CO. in Prophetstown, IL is another manufacturing employer with 3 OSHA inspections on record and $59,805 in current penalties.

8.2
violations per inspection
26.5%
of violations were serious
#3,934
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 49 violations across 6 OSHA inspections (8.2 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Anderson-Cook INC - LM Gear compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Anderson-Cook INC - LM Gear runs well above peers (3.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$59,825 Bottom 4% least affordable more affordable than 4% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($59,825) is well above this band, the chart's rightmost open-ended bucket. This employer: $59,825 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Anderson-Cook INC - LM Gear.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both6.06.066.06.01.316.231.045.960.7OSHA inspectionsViolations citedFRAM GROUP OPERATION…, OSHA inspections: 6 · Violations cited: 23ZEHRCO-GIANCOLA COMP…, OSHA inspections: 6 · Violations cited: 25UTILITY TRAILER MANU…, OSHA inspections: 6 · Violations cited: 12KARD WELDING, INC., OSHA inspections: 6 · Violations cited: 26PGA, INC, OSHA inspections: 6 · Violations cited: 23EMCO INDUSTRIES, LLC, OSHA inspections: 6 · Violations cited: 7LIFETIME PRODUCTS INC, OSHA inspections: 6 · Violations cited: 21ARCHER DANIELS MIDLAND, OSHA inspections: 6 · Violations cited: 5PERDUE FARMS, INC., OSHA inspections: 6 · Violations cited: 12TAYLORS SAUSAGE INC, OSHA inspections: 6 · Violations cited: 15SANCAST, INC. A SUBS…, OSHA inspections: 6 · Violations cited: 36PHILLIPS 66 COMPANY, OSHA inspections: 6 · Violations cited: 15CALVERT COMPANY INC, OSHA inspections: 6 · Violations cited: 58UFP BLANCHESTER, LLC., OSHA inspections: 6 · Violations cited: 22INCA PRESSWOOD-PALLE…, OSHA inspections: 6 · Violations cited: 18COLORS FOR PLASTICS,…, OSHA inspections: 6 · Violations cited: 19SANOH AMERICA, INC., OSHA inspections: 6 · Violations cited: 4AS AMERICA, INC., OSHA inspections: 6 · Violations cited: 8IMPERIAL ALUMINUM, LLC, OSHA inspections: 6 · Violations cited: 5SANDERSON FARMS INC., OSHA inspections: 6 · Violations cited: 8Anderson-Cook INC - …, OSHA inspections: 6 · Violations cited: 49
Anderson-Cook INC - LM Gear has 6 OSHA inspections on record and 49 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Anderson-Cook INC - LM Gear in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Anderson-Cook INC - LM Gear ranks #2,012 at $59,825 current penalty.

How Anderson-Cook INC - LM Gear Compares

Anderson-Cook INC - LM Gear's 8.17 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (3.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

6

First Inspection

2016-01-25

Last Inspection

2024-03-12

Inspection Span

8 yrs

Violations / Inspection

8.2

Avg Penalty / Inspection

$9,971

Industry Avg / Inspection

$6,093

What this shows 6 inspections over 8 years, averaging 8.2 violations per visit. That's $9,971 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

13

Serious

26.5% of total

0

Willful

0.0% of total

11

Repeat

22.4% of total

25

Other-Than-Serious

51.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$119,650

Current Penalty Amount

$59,825

Penalty Reduction

50.0%

What this shows Penalties were reduced by $59,825 from the initial assessment of $119,650. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Anderson-Cook INC - LM Gear compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Anderson-Cook INC - LM Gear Industry Avg
Inspections 6 2.6
Violations 49 8.0
Total Penalty $59,825 $15,763
Avg Penalty per Inspection $9,971 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Anderson-Cook INC - LM Gear, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($59,825 here).

Anomatic Corporation $59,817 OH Prophet Gear CO. $59,805 IL Felker Brothers Corporation $59,758 WI Madden Bolt Corporation $59,909 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (6 inspections here).

Fram Group Operations LLC 6 insp. Greenville, OH Zehrco-Giancola Composites INC. 6 insp. Ashtabula, OH Utility Trailer Manufacturing Company 6 insp. Atkins, VA Kard Welding, INC. 6 insp. Minster, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Anomatic Corporation
Newark, OH
6 inspections $59,817
Tropical Cheese Industries, INC.
Perth Amboy, NJ
1 inspections $0
Happy Kids for Kids, Inc
Fort Lauderdale, FL
0 inspections $0
Prophet Gear CO.
Prophetstown, IL
3 inspections $59,805
Dunamis Inc.
Los Angeles, CA
0 inspections $0

Compare Anderson-Cook INC - LM Gear vs Anomatic Corporation side-by-side →

What to do with this record

Use Anderson-Cook INC - LM Gear's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Anderson-Cook INC - LM Gear against Anomatic Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Anderson-Cook INC - LM Gear's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Anderson-Cook INC - LM Gear safe to work at? ▼
Based on OSHA records, Anderson-Cook INC - LM Gear's workplace safety record is concerning, with multiple serious compliance issues. The employer has 49 violations across 6 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Anderson-Cook INC - LM Gear have? ▼
Anderson-Cook INC - LM Gear has 49 OSHA violations on record, including 13 serious, 0 willful, and 11 repeat violations. The total current penalty amount is $59,825.
How many OSHA inspections has Anderson-Cook INC - LM Gear had? ▼
Anderson-Cook INC - LM Gear has had 6 OSHA inspections, with the first recorded on 2016-01-25 and the most recent on 2024-03-12. This averages 8.2 violations per inspection.
What is the total penalty amount for Anderson-Cook INC - LM Gear? ▼
Anderson-Cook INC - LM Gear has been assessed $59,825 in current OSHA penalties, reduced from an initial assessment of $119,650 (a 50.0% reduction).
Does Anderson-Cook INC - LM Gear have any serious or willful violations? ▼
Yes. Anderson-Cook INC - LM Gear has 13 serious violations, and 11 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Anderson-Cook INC - LM Gear operate in? ▼
Anderson-Cook INC - LM Gear operates in the Manufacturing sector (NAICS code 332721). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Anderson-Cook INC - LM Gear rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Anderson-Cook INC - LM Gear ranks #3,934 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Anderson-Cook INC - LM Gear's safety record compare to industry average? ▼
Anderson-Cook INC - LM Gear's total OSHA penalty of $59,825 is above the Manufacturing industry average of $15,763 per employer (3.8x the average). The employer has 6 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Prophet Gear CO. in Prophetstown, IL is a similar manufacturing employer with $59,805 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 6 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.