PlainWorker
Employers › RI

Manufacturing · Cranston, RI

American Plating CO., INC.

According to OSHA enforcement records (2010–2026), American Plating CO., INC. ranks #43,545 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 3 inspections.

Upper half by penalty60% serious
$7,492
OSHA penalties
5
Violations cited
3
OSHA inspections
#43,545
of 99,447 penalized employers

American Plating CO., INC. in Cranston, RI has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $7,492. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected American Plating CO., INC. 3 times across a longer 11-year span, an infrequent cadence. These inspections resulted in 5 violations, averaging 1.7 per inspection. According to OSHA enforcement records, its total current penalty ranks #43,545 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Kern Precision, Inc in Glendale Heights, IL is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

1.7
violations per inspection
60.0%
of violations were serious
#43,545
of 99,447 penalized employers

Compliance score

C 66/100
  • C OSHA safety compliance: 5 violations across 3 OSHA inspections (1.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How American Plating CO., INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows American Plating CO., INC. runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$7,492 Bottom 44% least affordable more affordable than 44% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is American Plating CO., INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.613.626.539.452.4OSHA inspectionsViolations citedMVP KOSHER FOODS, LL…, OSHA inspections: 3 · Violations cited: 36CHART, INC., OSHA inspections: 3 · Violations cited: 19WHEELER TANK MANUFAC…, OSHA inspections: 3 · Violations cited: 50ALPINE VALLEY BREAD …, OSHA inspections: 3 · Violations cited: 24KD ACQUISITION I, LL…, OSHA inspections: 3 · Violations cited: 12SUN AMERICA CONVERTI…, OSHA inspections: 3 · Violations cited: 17HABASIT AMERICA, INC., OSHA inspections: 3 · Violations cited: 9MAC TRAILER MFG. INC., OSHA inspections: 3 · Violations cited: 14PERDUE FOODS LLC, OSHA inspections: 3 · Violations cited: 8WASTEQUIP MANUFACTUR…, OSHA inspections: 3 · Violations cited: 12HARVEY PALLETS INC, OSHA inspections: 3 · Violations cited: 7GLOBAL PROTECTION PR…, OSHA inspections: 3 · Violations cited: 11SCENIC WOOD PRODUCTS…, OSHA inspections: 3 · Violations cited: 22REPUBLIC BAG INC, OSHA inspections: 3 · Violations cited: 5INTERNATIONAL CONTRO…, OSHA inspections: 3 · Violations cited: 10SHAW BAKERS LLC, OSHA inspections: 3 · Violations cited: 9GENTRY MACHINE WORKS…, OSHA inspections: 3 · Violations cited: 16J.P. DONOVAN CONSTRU…, OSHA inspections: 3 · Violations cited: 10HARLEY-DAVIDSON MOTO…, OSHA inspections: 3 · Violations cited: 3HUNTSVILLE GRANITE A…, OSHA inspections: 3 · Violations cited: 12American Plating CO.…, OSHA inspections: 3 · Violations cited: 5
American Plating CO., INC. has 3 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

American Plating CO., INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, American Plating CO., INC. ranks #18,993 at $7,492 current penalty.

How American Plating CO., INC. Compares

American Plating CO., INC.'s 1.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-01-22

Last Inspection

2026-02-06

Inspection Span

11 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$2,497

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 11 years, averaging 1.7 violations per visit. That's $2,497 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

60.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

40.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$12,464

Current Penalty Amount

$7,492

Penalty Reduction

39.9%

What this shows Penalties were reduced by $4,972 from the initial assessment of $12,464. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How American Plating CO., INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric American Plating CO., INC. Industry Avg
Inspections 3 2.6
Violations 5 8.0
Total Penalty $7,492 $15,763
Avg Penalty per Inspection $2,497 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for American Plating CO., INC., both outside RI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($7,492 here).

Caledonia Pallets, LLC $7,492 WI Black Timber Furniture Company $7,490 MT Platte Valley Pet Food, INC. $7,490 NE Kyrie Enterprises LLC $7,490 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

MVP Kosher Foods, LLC a/K/a Mehadrin Kosher Poultr 3 insp. Birdsboro, PA Chart, INC. 3 insp. Beasley, TX Wheeler Tank Manufacturing, INC. 3 insp. Sioux Falls, SD Alpine Valley Bread Company 3 insp. Mesa, AZ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Caledonia Pallets, LLC
Caledonia, WI
2 inspections $7,492
Kern Precision, Inc
Glendale Heights, IL
0 inspections $0
Manhanttan Stitching Company Inc.
Buena Park, CA
0 inspections $0
Black Timber Furniture Company
Belgrade, MT
2 inspections $7,490
Platte Valley Pet Food, INC.
Scottsbluff, NE
2 inspections $7,490

Compare American Plating CO., INC. vs Caledonia Pallets, LLC side-by-side →

What to do with this record

Use American Plating CO., INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare American Plating CO., INC. against Caledonia Pallets, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether American Plating CO., INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is American Plating CO., INC. safe to work at? ▼
Based on OSHA records, American Plating CO., INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does American Plating CO., INC. have? ▼
American Plating CO., INC. has 5 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $7,492.
How many OSHA inspections has American Plating CO., INC. had? ▼
American Plating CO., INC. has had 3 OSHA inspections, with the first recorded on 2015-01-22 and the most recent on 2026-02-06. This averages 1.7 violations per inspection.
What is the total penalty amount for American Plating CO., INC.? ▼
American Plating CO., INC. has been assessed $7,492 in current OSHA penalties, reduced from an initial assessment of $12,464 (a 39.9% reduction).
Does American Plating CO., INC. have any serious or willful violations? ▼
Yes. American Plating CO., INC. has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does American Plating CO., INC. operate in? ▼
American Plating CO., INC. operates in the Manufacturing sector (NAICS code 332813). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does American Plating CO., INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, American Plating CO., INC. ranks #43,545 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does American Plating CO., INC.'s safety record compare to industry average? ▼
American Plating CO., INC.'s total OSHA penalty of $7,492 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Kern Precision, Inc in Glendale Heights, IL is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.