PlainWorker
Employers › FL

Manufacturing · Orlando, FL

American Metal Products, INC.

According to OSHA enforcement records (2010–2026), American Metal Products, INC. ranks #74,007 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Lower half by penalty100% serious
$2,282
OSHA penalties
2
Violations cited
2
OSHA inspections
#74,007
of 99,447 penalized employers

American Metal Products, INC. in Orlando, FL has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,282. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected American Metal Products, INC. 2 times across a longer 5-year span, an infrequent cadence. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #74,007 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, American Marine Design Corporation in Saint Marys, GA is another manufacturing employer with 3 OSHA inspections on record and $2,282 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious
#74,007
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How American Metal Products, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows American Metal Products, INC. runs well below peers (0.14x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,282 Top 26% most affordable more affordable than 74% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is American Metal Products, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.39.919.529.138.8OSHA inspectionsViolations citedSPHERE ALLIANCE INC …, OSHA inspections: 2 · Violations cited: 19VAN DUERR INDUSTRIES…, OSHA inspections: 2 · Violations cited: 37ATORIA'S BAKING COMP…, OSHA inspections: 2 · Violations cited: 9CZT ENERGY USA INC., OSHA inspections: 2 · Violations cited: 24OWENS-ILLINOIS, OSHA inspections: 2 · Violations cited: 7KALMBACH FEEDS, INC., OSHA inspections: 2 · Violations cited: 13B P WEST COAST PRODU…, OSHA inspections: 2 · Violations cited: 7HILAND ICE CREAM, OSHA inspections: 2 · Violations cited: 6HOLOGIC, INC., OSHA inspections: 2 · Violations cited: 7EVERGREEN PACKAGING,…, OSHA inspections: 2 · Violations cited: 8HICKORY SPRINGS MANU…, OSHA inspections: 2 · Violations cited: 5EMERALD PERFORMANCE …, OSHA inspections: 2 · Violations cited: 9CHRIS KANAGY, OSHA inspections: 2 · Violations cited: 13SOUTHERN ENERGY HOME…, OSHA inspections: 2 · Violations cited: 11ATLANTA ROTOMOLDING …, OSHA inspections: 2 · Violations cited: 10NORTHERN PELAGIC GRO…, OSHA inspections: 2 · Violations cited: 8HONEYVILLE GRAIN INC, OSHA inspections: 2 · Violations cited: 6THER-A-PEDIC SLEEP P…, OSHA inspections: 2 · Violations cited: 14SYLVAMO NORTH AMERIC…, OSHA inspections: 2 · Violations cited: 3ACTON TECHNOLOGIES, …, OSHA inspections: 2 · Violations cited: 6American Metal Produ…, OSHA inspections: 2 · Violations cited: 2
American Metal Products, INC. has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

American Metal Products, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, American Metal Products, INC. ranks #28,998 at $2,282 current penalty.

How American Metal Products, INC. Compares

American Metal Products, INC.'s 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.14x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-10-04

Last Inspection

2023-02-24

Inspection Span

5 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$1,141

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 5 years, averaging 1.0 violations per visit. That's $1,141 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,803

Current Penalty Amount

$2,282

Penalty Reduction

40.0%

What this shows Penalties were reduced by $1,521 from the initial assessment of $3,803. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How American Metal Products, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric American Metal Products, INC. Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $2,282 $15,763
Avg Penalty per Inspection $1,141 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for American Metal Products, INC., both outside FL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,282 here).

American Marine Design Corporation $2,282 GA Eci Screenprint, INC. $2,282 CT Air Systems Sheet Metal Company, INC $2,280 WV Globe Machine MFG CO INC $2,280 WA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Sphere Alliance INC DBA Advanced Aircraft Seal 2 insp. Riverside, CA Van Duerr Industries, INC. 2 insp. Chico, CA Atoria's Baking Company 2 insp. Gilroy, CA CZT Energy USA INC. 2 insp. Sealy, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

American Marine Design Corporation
Saint Marys, GA
3 inspections $2,282
Eci Screenprint, INC.
Watertown, CT
2 inspections $2,282
Solid Wood Cabinet Company
Mechanicsburg, PA
0 inspections $0
Hollis Line Machine
Hollis, NH
0 inspections $0
51 North Brewery
Lake Orion, MI
0 inspections $0

Compare American Metal Products, INC. vs American Marine Design Corporation side-by-side →

What to do with this record

Use American Metal Products, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare American Metal Products, INC. against American Marine Design Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether American Metal Products, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is American Metal Products, INC. safe to work at? ▼
Based on OSHA records, American Metal Products, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does American Metal Products, INC. have? ▼
American Metal Products, INC. has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,282.
How many OSHA inspections has American Metal Products, INC. had? ▼
American Metal Products, INC. has had 2 OSHA inspections, with the first recorded on 2017-10-04 and the most recent on 2023-02-24. This averages 1.0 violations per inspection.
What is the total penalty amount for American Metal Products, INC.? ▼
American Metal Products, INC. has been assessed $2,282 in current OSHA penalties, reduced from an initial assessment of $3,803 (a 40.0% reduction).
Does American Metal Products, INC. have any serious or willful violations? ▼
Yes. American Metal Products, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does American Metal Products, INC. operate in? ▼
American Metal Products, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does American Metal Products, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, American Metal Products, INC. ranks #74,007 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does American Metal Products, INC.'s safety record compare to industry average? ▼
American Metal Products, INC.'s total OSHA penalty of $2,282 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, American Marine Design Corporation in Saint Marys, GA is a similar manufacturing employer with $2,282 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.