Wholesale Trade · Columbus, OH

Ace Iron and Metal

According to OSHA enforcement records (2010–2026), Ace Iron and Metal ranks #5,765 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 39 violations across 4 inspections.

Top 10% by penalty51% serious
$46,013
OSHA penalties
39
Violations cited
4
OSHA inspections
#5,765
of 99,447 penalized employers

Ace Iron and Metal in Columbus, OH has been the subject of 4 OSHA workplace inspections and 39 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $46,013. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Ace Iron and Metal 4 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 39 violations, averaging 9.8 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #5,765 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 20 were classified as serious - indicating hazards that could cause death or serious harm. Against the Wholesale Trade industry average of 2 inspections per employer, this runs well above peers (2.0x the sector average) on inspection frequency. For comparison, Afam Concept, INC. in Chicago, IL is another wholesale trade employer with 5 OSHA inspections on record and $45,962 in current penalties.

9.8
violations per inspection
51.3%
of violations were serious
#5,765
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 39 violations across 4 OSHA inspections (9.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Ace Iron and Metal compares on OSHA penalties

Total current penalty vs the Wholesale Trade per-employer average

in penalties

What this shows Ace Iron and Metal runs far above peers (5.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$46,013 Bottom 6% least affordable more affordable than 6% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). This entry sits in this band. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Wholesale Trade employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Ace Iron and Metal.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.0010.220.530.741.0OSHA inspectionsViolations citedLKQ OF MICHIGAN, OSHA inspections: 4 · Violations cited: 14LINCOLN RECYCLING, I…, OSHA inspections: 4 · Violations cited: 7UNITED PULSE TRADING…, OSHA inspections: 4 · Violations cited: 7KAHUT WASTE SERVICES…, OSHA inspections: 4 · Violations cited: 15QPS EMPLOYMENT GROUP, OSHA inspections: 4 · Violations cited: 0PIONEER BUILDERS SUP…, OSHA inspections: 4 · Violations cited: 13DOKA USA LTD, OSHA inspections: 4 · Violations cited: 12JASPAL KAUR BRAR, OSHA inspections: 4 · Violations cited: 6EMPIRE AUTO PARTS, OSHA inspections: 4 · Violations cited: 7SURYA, INC, OSHA inspections: 4 · Violations cited: 8LOOSE PLASTICS INC, OSHA inspections: 4 · Violations cited: 6PENSKE LOGISTICS, OSHA inspections: 4 · Violations cited: 1AMAZON.COM.DEDC LLC, OSHA inspections: 4 · Violations cited: 1TERRAZZO & MARBLE SU…, OSHA inspections: 4 · Violations cited: 15THOMPSON MASONRY CON…, OSHA inspections: 4 · Violations cited: 7MCLANE COMPANY, INC., OSHA inspections: 4 · Violations cited: 5KINPAK, INC., OSHA inspections: 4 · Violations cited: 14ARCHER DANIELS MIDLAND, OSHA inspections: 4 · Violations cited: 5BARRETT FARM SUPPLY …, OSHA inspections: 4 · Violations cited: 17CHEMAID LABORATORIES…, OSHA inspections: 4 · Violations cited: 6Ace Iron and Metal, OSHA inspections: 4 · Violations cited: 39
Ace Iron and Metal has 4 OSHA inspections on record and 39 violations cited. The crosshair marks the median among these Wholesale Trade peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Ace Iron and Metal in the Wholesale Trade enforcement ledger

Wholesale Trade sector: Ace Iron and Metal is the #225 heaviest OSHA penalty carrier of 4,429 employers with nonzero fines ($46,013).

How Ace Iron and Metal Compares

Ace Iron and Metal's 9.75 violations per inspection compares to the Wholesale Trade sector average of 5.5 violations per employer.

Against the Wholesale Trade industry average of $9,112 per employer, this employer's current OSHA penalty runs far above peers (5.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2010-09-24

Last Inspection

2020-09-21

Inspection Span

10 yrs

Violations / Inspection

9.8

Avg Penalty / Inspection

$11,503

Industry Avg / Inspection

$4,665

What this shows 4 inspections over 10 years, averaging 9.8 violations per visit. That's $11,503 per inspection vs. the Wholesale Trade average of $4,665.

Enforcement detail

Violation Breakdown

20

Serious

51.3% of total

0

Willful

0.0% of total

2

Repeat

5.1% of total

17

Other-Than-Serious

43.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$81,488

Current Penalty Amount

$46,013

Penalty Reduction

43.5%

What this shows Penalties were reduced by $35,475 from the initial assessment of $81,488. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Wholesale Trade

How Ace Iron and Metal compares to the Wholesale Trade sector, which has 6,881 employers tracked by PlainWorker.

Metric Ace Iron and Metal Industry Avg
Inspections 4 2.0
Violations 39 5.5
Total Penalty $46,013 $9,112
Avg Penalty per Inspection $11,503 $4,665

Nationwide Wholesale Trade peers with similar penalties or inspection counts

Two OSHA-record peer sets for Ace Iron and Metal, both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($46,013 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Nearby & Similar Employers in Wholesale Trade

Showing 5 of 6880 other employers tracked in this sector.

Compare Ace Iron and Metal vs Rebecca Minkoff LLC side-by-side →

What to do with this record

Use Ace Iron and Metal's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Ace Iron and Metal against Rebecca Minkoff LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Ace Iron and Metal's inspection and penalty record is typical for Wholesale Trade or an outlier against the sector's own average. View the Wholesale Trade sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Ace Iron and Metal safe to work at?
Based on OSHA records, Ace Iron and Metal's workplace safety record is concerning, with multiple serious compliance issues. The employer has 39 violations across 4 inspections, including 20 serious violations. Compared to Wholesale Trade industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Ace Iron and Metal have?
Ace Iron and Metal has 39 OSHA violations on record, including 20 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $46,013.
How many OSHA inspections has Ace Iron and Metal had?
Ace Iron and Metal has had 4 OSHA inspections, with the first recorded on 2010-09-24 and the most recent on 2020-09-21. This averages 9.8 violations per inspection.
What is the total penalty amount for Ace Iron and Metal?
Ace Iron and Metal has been assessed $46,013 in current OSHA penalties, reduced from an initial assessment of $81,488 (a 43.5% reduction).
Does Ace Iron and Metal have any serious or willful violations?
Yes. Ace Iron and Metal has 20 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Ace Iron and Metal operate in?
Ace Iron and Metal operates in the Wholesale Trade sector (NAICS code 423930). This industry has 6,881 employers tracked by PlainWorker, with 13,442 total OSHA inspections and $62.70M in cumulative penalties.
Where does Ace Iron and Metal rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Ace Iron and Metal ranks #5,765 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Ace Iron and Metal's safety record compare to industry average?
Ace Iron and Metal's total OSHA penalty of $46,013 is above the Wholesale Trade industry average of $9,112 per employer (5.0x the average). The employer has 4 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Afam Concept, INC. in Chicago, IL is a similar wholesale trade employer with $45,962 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.