PlainWorker
Employers › PA

Manufacturing · Fairless Hills, PA

Abington Reldan Metals, LLC

According to OSHA enforcement records (2010–2026), Abington Reldan Metals, LLC ranks #11,526 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 32 violations across 4 inspections.

Top 25% by penalty81% serious
$28,058
OSHA penalties
32
Violations cited
4
OSHA inspections
#11,526
of 99,447 penalized employers

Abington Reldan Metals, LLC in Fairless Hills, PA has been the subject of 4 OSHA workplace inspections and 32 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $28,058. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Abington Reldan Metals, LLC 4 times across a longer 12-year span, an infrequent cadence. These inspections resulted in 32 violations, averaging 8.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #11,526 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 26 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, NSK Corporation in Clarinda, IA is another manufacturing employer with 4 OSHA inspections on record and $28,044 in current penalties.

8.0
violations per inspection
81.3%
of violations were serious
#11,526
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 32 violations across 4 OSHA inspections (8.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Abington Reldan Metals, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Abington Reldan Metals, LLC runs moderately above peers (1.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$28,058 Bottom 12% least affordable more affordable than 12% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Abington Reldan Metals, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.00.49.017.526.034.5OSHA inspectionsViolations citedSAN JOAQUIN REFINING…, OSHA inspections: 4 · Violations cited: 17LACTALIS HERITAGE DA…, OSHA inspections: 4 · Violations cited: 23PARKER-HANNIFIN CORP…, OSHA inspections: 4 · Violations cited: 3LAPMASTER PRECISION …, OSHA inspections: 4 · Violations cited: 21MENOMINEE TRIBAL ENT…, OSHA inspections: 4 · Violations cited: 21REFRESCO BEVERAGES U…, OSHA inspections: 4 · Violations cited: 6PLAZE INC., OSHA inspections: 4 · Violations cited: 23DIVERSIFIED MANUFACT…, OSHA inspections: 4 · Violations cited: 33AFFORDABLE INTERIOR …, OSHA inspections: 4 · Violations cited: 18TYSON FOODS, INC., OSHA inspections: 4 · Violations cited: 6PROBUILD COMPANY LLC, OSHA inspections: 4 · Violations cited: 30GIBSON WINE COMPANY, OSHA inspections: 4 · Violations cited: 24ANTOLIN ALABAMA, LLC, OSHA inspections: 4 · Violations cited: 4TFH PUBLICATIONS, INC., OSHA inspections: 4 · Violations cited: 2CAMBRIDGE ISOTOPE LA…, OSHA inspections: 4 · Violations cited: 12TRIO FOUNDRY, INC, OSHA inspections: 4 · Violations cited: 26CONWED PLASTICS, LLC, OSHA inspections: 4 · Violations cited: 13MONOGRAM APPETIZERS,…, OSHA inspections: 4 · Violations cited: 4FOXTAIL FOODS, LLC, OSHA inspections: 4 · Violations cited: 12ACCO MATERIAL HANDLI…, OSHA inspections: 4 · Violations cited: 19Abington Reldan Meta…, OSHA inspections: 4 · Violations cited: 32
Abington Reldan Metals, LLC has 4 OSHA inspections on record and 32 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Abington Reldan Metals, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Abington Reldan Metals, LLC ranks #5,710 at $28,058 current penalty.

How Abington Reldan Metals, LLC Compares

Abington Reldan Metals, LLC's 8.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2011-12-19

Last Inspection

2024-02-05

Inspection Span

12 yrs

Violations / Inspection

8.0

Avg Penalty / Inspection

$7,015

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 12 years, averaging 8.0 violations per visit. That's $7,015 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

26

Serious

81.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

18.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$53,611

Current Penalty Amount

$28,058

Penalty Reduction

47.7%

What this shows Penalties were reduced by $25,553 from the initial assessment of $53,611. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Abington Reldan Metals, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Abington Reldan Metals, LLC Industry Avg
Inspections 4 2.6
Violations 32 8.0
Total Penalty $28,058 $15,763
Avg Penalty per Inspection $7,015 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Abington Reldan Metals, LLC, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($28,058 here).

Monschein Industries, INC. $28,060 CA Classic Window Coverings, LLC $28,070 GA Scaletta Moloney Armoring Corporation $28,044 IL NSK Corporation $28,044 IA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

San Joaquin Refining CO., INC. 4 insp. Bakersfield, CA Lactalis Heritage Dairy, INC. 4 insp. Wausau, WI Parker-Hannifin Corporation 4 insp. Washington, MO Lapmaster Precision Finishing Services, LLC 4 insp. Dayton, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Monschein Industries, INC.
Riverbank, CA
5 inspections $28,060
Classic Window Coverings, LLC
Buford, GA
2 inspections $28,070
Scaletta Moloney Armoring Corporation
Bedford Park, IL
5 inspections $28,044
NSK Corporation
Clarinda, IA
4 inspections $28,044
Mid-State Machine Company
Mount Ulla, NC
0 inspections $0

Compare Abington Reldan Metals, LLC vs Monschein Industries, INC. side-by-side →

What to do with this record

Use Abington Reldan Metals, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Abington Reldan Metals, LLC against Monschein Industries, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Abington Reldan Metals, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Abington Reldan Metals, LLC safe to work at? ▼
Based on OSHA records, Abington Reldan Metals, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 32 violations across 4 inspections, including 26 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Abington Reldan Metals, LLC have? ▼
Abington Reldan Metals, LLC has 32 OSHA violations on record, including 26 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $28,058.
How many OSHA inspections has Abington Reldan Metals, LLC had? ▼
Abington Reldan Metals, LLC has had 4 OSHA inspections, with the first recorded on 2011-12-19 and the most recent on 2024-02-05. This averages 8.0 violations per inspection.
What is the total penalty amount for Abington Reldan Metals, LLC? ▼
Abington Reldan Metals, LLC has been assessed $28,058 in current OSHA penalties, reduced from an initial assessment of $53,611 (a 47.7% reduction).
Does Abington Reldan Metals, LLC have any serious or willful violations? ▼
Yes. Abington Reldan Metals, LLC has 26 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Abington Reldan Metals, LLC operate in? ▼
Abington Reldan Metals, LLC operates in the Manufacturing sector (NAICS code 331492). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Abington Reldan Metals, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Abington Reldan Metals, LLC ranks #11,526 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Abington Reldan Metals, LLC's safety record compare to industry average? ▼
Abington Reldan Metals, LLC's total OSHA penalty of $28,058 is above the Manufacturing industry average of $15,763 per employer (1.8x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, NSK Corporation in Clarinda, IA is a similar manufacturing employer with $28,044 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.