PlainWorker
Employers › OH

Manufacturing · Dayton, OH

Lapmaster Precision Finishing Services, LLC

According to OSHA enforcement records (2010–2026), Lapmaster Precision Finishing Services, LLC ranks #3,129 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 21 violations across 4 inspections.

Top 5% by penalty67% serious
$69,883
OSHA penalties
21
Violations cited
4
OSHA inspections
#3,129
of 99,447 penalized employers

Lapmaster Precision Finishing Services, LLC in Dayton, OH has been the subject of 4 OSHA workplace inspections and 21 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $69,883. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on Lapmaster Precision Finishing Services, LLC: 4 inspections in 1 year, several times a year. These inspections resulted in 21 violations, averaging 5.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #3,129 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 14 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Valmont Utility in El Dorado, KS is another manufacturing employer with 4 OSHA inspections on record and $69,911 in current penalties.

5.3
violations per inspection
66.7%
of violations were serious
#3,129
of 99,447 penalized employers

Compliance score

F 14/100
  • F OSHA safety compliance: 21 violations across 4 OSHA inspections (5.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Lapmaster Precision Finishing Services, LLC runs well above peers (4.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$69,883 Bottom 3% least affordable more affordable than 3% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($69,883) is well above this band, the chart's rightmost open-ended bucket. This employer: $69,883 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Lapmaster Precision Finishing Services, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.01.59.81826.334.5OSHA inspectionsViolations citedTIGRE USA INC., OSHA inspections: 4 · Violations cited: 9EAGLE MANUFACTURING …, OSHA inspections: 4 · Violations cited: 18LUMBER AND THINGS, INC, OSHA inspections: 4 · Violations cited: 10OWENS-BROCKWAY GLASS…, OSHA inspections: 4 · Violations cited: 7REPUBLIC STEEL, OSHA inspections: 4 · Violations cited: 7JCG FOODS OF ALABAMA…, OSHA inspections: 4 · Violations cited: 5EAST COAST EROSION B…, OSHA inspections: 4 · Violations cited: 11ABINGTON RELDAN META…, OSHA inspections: 4 · Violations cited: 32FUJI VEGETABLE OIL, …, OSHA inspections: 4 · Violations cited: 5EXTANG CORP, OSHA inspections: 4 · Violations cited: 33OLAM WEST COAST, INC…, OSHA inspections: 4 · Violations cited: 5WALTER LONG MANUFACT…, OSHA inspections: 4 · Violations cited: 23E & H STEEL CORPORAT…, OSHA inspections: 4 · Violations cited: 6FINTEX LLC, OSHA inspections: 4 · Violations cited: 30CFM CORPORATION, OSHA inspections: 4 · Violations cited: 6AMERICAN WALNUT LLC, OSHA inspections: 4 · Violations cited: 22KAISER ALUMINUM WARR…, OSHA inspections: 4 · Violations cited: 6WINDKITS, LLC, OSHA inspections: 4 · Violations cited: 3JACKSON METALWORKS, …, OSHA inspections: 4 · Violations cited: 10GENCOR INDUSTRIES, I…, OSHA inspections: 4 · Violations cited: 3Lapmaster Precision …, OSHA inspections: 4 · Violations cited: 21
Lapmaster Precision Finishing Services, LLC has 4 OSHA inspections on record and 21 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Lapmaster Precision Finishing Services, LLC in the Manufacturing enforcement ledger

In Manufacturing, Lapmaster Precision Finishing Services, LLC sits at penalty rank #1,616 of 35,243 penalized establishments ($69,883 assessed).

How Lapmaster Precision Finishing Services, LLC Compares

Lapmaster Precision Finishing Services, LLC's 5.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (4.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2012-09-11

Last Inspection

2013-07-26

Inspection Span

1 yr

Violations / Inspection

5.3

Avg Penalty / Inspection

$17,471

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 1 year, averaging 5.3 violations per visit. That's $17,471 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

14

Serious

66.7% of total

0

Willful

0.0% of total

6

Repeat

28.6% of total

1

Other-Than-Serious

4.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$155,775

Current Penalty Amount

$69,883

Penalty Reduction

55.1%

What this shows Penalties were reduced by $85,892 from the initial assessment of $155,775. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Lapmaster Precision Finishing Services, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Lapmaster Precision Finishing Services, LLC Industry Avg
Inspections 4 2.6
Violations 21 8.0
Total Penalty $69,883 $15,763
Avg Penalty per Inspection $17,471 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Lapmaster Precision Finishing Services, LLC, both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($69,883 here).

National Manufacturing CO., INC $69,892 NJ Champion Home Builders, INC. $69,909 TX Valmont Utility $69,911 KS Heritage Plastics, INC. $69,916 MS

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Tigre USA INC. 4 insp. Janesville, WI Eagle Manufacturing Company 4 insp. Wellsburg, WV Lumber and Things, INC 4 insp. Keyser, WV Owens-Brockway Glass Container INC. 4 insp. Streator, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

National Manufacturing CO., INC
Chatham, NJ
8 inspections $69,892
Champion Home Builders, INC.
Athens, TX
2 inspections $69,909
Valmont Utility
El Dorado, KS
4 inspections $69,911
Heritage Plastics, INC.
Picayune, MS
3 inspections $69,916
Carolina Skiff LLC
Waycross, GA
4 inspections $69,917

Compare Lapmaster Precision Finishing Services, LLC vs National Manufacturing CO., INC side-by-side →

What to do with this record

Use Lapmaster Precision Finishing Services, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Lapmaster Precision Finishing Services, LLC against National Manufacturing CO., INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Lapmaster Precision Finishing Services, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Lapmaster Precision Finishing Services, LLC safe to work at? ▼
Based on OSHA records, Lapmaster Precision Finishing Services, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 21 violations across 4 inspections, including 14 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Lapmaster Precision Finishing Services, LLC have? ▼
Lapmaster Precision Finishing Services, LLC has 21 OSHA violations on record, including 14 serious, 0 willful, and 6 repeat violations. The total current penalty amount is $69,883.
How many OSHA inspections has Lapmaster Precision Finishing Services, LLC had? ▼
Lapmaster Precision Finishing Services, LLC has had 4 OSHA inspections, with the first recorded on 2012-09-11 and the most recent on 2013-07-26. This averages 5.3 violations per inspection.
What is the total penalty amount for Lapmaster Precision Finishing Services, LLC? ▼
Lapmaster Precision Finishing Services, LLC has been assessed $69,883 in current OSHA penalties, reduced from an initial assessment of $155,775 (a 55.1% reduction).
Does Lapmaster Precision Finishing Services, LLC have any serious or willful violations? ▼
Yes. Lapmaster Precision Finishing Services, LLC has 14 serious violations, and 6 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Lapmaster Precision Finishing Services, LLC operate in? ▼
Lapmaster Precision Finishing Services, LLC operates in the Manufacturing sector (NAICS code 332721). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Lapmaster Precision Finishing Services, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Lapmaster Precision Finishing Services, LLC ranks #3,129 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Lapmaster Precision Finishing Services, LLC's safety record compare to industry average? ▼
Lapmaster Precision Finishing Services, LLC's total OSHA penalty of $69,883 is above the Manufacturing industry average of $15,763 per employer (4.4x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Valmont Utility in El Dorado, KS is a similar manufacturing employer with $69,911 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.