PlainWorker
Employers › MN

Manufacturing · Plymouth, MN

Aacron INC DBA Aacron Anodizing

According to OSHA enforcement records (2010–2026), Aacron INC DBA Aacron Anodizing ranks #21,132 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 21 violations across 4 inspections.

Top 25% by penalty67% serious
$17,000
OSHA penalties
21
Violations cited
4
OSHA inspections
#21,132
of 99,447 penalized employers

Aacron INC DBA Aacron Anodizing in Plymouth, MN has been the subject of 4 OSHA workplace inspections and 21 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Aacron INC DBA Aacron Anodizing 4 times over 3 years, roughly annually. These inspections resulted in 21 violations, averaging 5.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #21,132 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 14 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Ifco Systems N.a., INC. in Valdosta, GA is another manufacturing employer with 2 OSHA inspections on record and $17,000 in current penalties.

5.3
violations per inspection
66.7%
of violations were serious
#21,132
of 99,447 penalized employers

Compliance score

F 14/100
  • F OSHA safety compliance: 21 violations across 4 OSHA inspections (5.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Aacron INC DBA Aacron Anodizing sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$17,000 Bottom 21% least affordable more affordable than 21% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Aacron INC DBA Aacron Anodizing.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.01.410.21927.836.6OSHA inspectionsViolations citedTRP INTERNATIONAL, I…, OSHA inspections: 4 · Violations cited: 16JOHNSONVILLE, LLC, OSHA inspections: 4 · Violations cited: 15METSO MINERALS INDUS…, OSHA inspections: 4 · Violations cited: 19VALMONT UTILITY, OSHA inspections: 4 · Violations cited: 12FIVE STAR CUSTOM FOODS, OSHA inspections: 4 · Violations cited: 11AFP ADVANCED FOOD PR…, OSHA inspections: 4 · Violations cited: 14TECHNICAL MACHINING …, OSHA inspections: 4 · Violations cited: 28TYSON FRESH MEATS, I…, OSHA inspections: 4 · Violations cited: 7COOPER STANDARD AUTO…, OSHA inspections: 4 · Violations cited: 18TRI-CITIES MANUFACTU…, OSHA inspections: 4 · Violations cited: 35ANHEUSER-BUSCH, LLC., OSHA inspections: 4 · Violations cited: 6AURUBIS BUFFALO, INC., OSHA inspections: 4 · Violations cited: 5PINNACLE STRUCTURES,…, OSHA inspections: 4 · Violations cited: 9GEORGIA PLATING, INC., OSHA inspections: 4 · Violations cited: 14EAST COAST SIGNS & A…, OSHA inspections: 4 · Violations cited: 11KRATON CHEMICAL, LLC., OSHA inspections: 4 · Violations cited: 5U.F.S. INDUSTRIES IN…, OSHA inspections: 4 · Violations cited: 9TUMBLEWEED TINY HOUS…, OSHA inspections: 4 · Violations cited: 9CLARK DIETRICH BUILD…, OSHA inspections: 4 · Violations cited: 3MASONRY REINFORCING …, OSHA inspections: 4 · Violations cited: 9Aacron INC DBA Aacro…, OSHA inspections: 4 · Violations cited: 21
Aacron INC DBA Aacron Anodizing has 4 OSHA inspections on record and 21 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Aacron INC DBA Aacron Anodizing in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Aacron INC DBA Aacron Anodizing ranks #10,042 at $17,000 current penalty.

How Aacron INC DBA Aacron Anodizing Compares

Aacron INC DBA Aacron Anodizing's 5.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2012-03-27

Last Inspection

2015-09-22

Inspection Span

3 yrs

Violations / Inspection

5.3

Avg Penalty / Inspection

$4,250

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 3 years, averaging 5.3 violations per visit. That's $4,250 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

14

Serious

66.7% of total

0

Willful

0.0% of total

2

Repeat

9.5% of total

5

Other-Than-Serious

23.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$39,300

Current Penalty Amount

$17,000

Penalty Reduction

56.7%

What this shows Penalties were reduced by $22,300 from the initial assessment of $39,300. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Aacron INC DBA Aacron Anodizing compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Aacron INC DBA Aacron Anodizing Industry Avg
Inspections 4 2.6
Violations 21 8.0
Total Penalty $17,000 $15,763
Avg Penalty per Inspection $4,250 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Aacron INC DBA Aacron Anodizing, both outside MN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($17,000 here).

Dal-Tile Distribution, INC. $17,000 TX Crimson Fire Aerials, INC. $17,000 PA Central Rubber Company $17,000 IL Cessna Aircraft Company $17,000 KS

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

TRP International, INC. 4 insp. Tonopah, NV Johnsonville, LLC 4 insp. Sheboygan Falls, WI Metso Minerals Industries INC. 4 insp. Warrenton, MO Valmont Utility 4 insp. El Dorado, KS

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Dal-Tile Distribution, INC.
El Paso, TX
3 inspections $17,000
Crimson Fire Aerials, INC.
Ephrata, PA
2 inspections $17,000
Central Rubber Company
Belvidere, IL
2 inspections $17,000
Cessna Aircraft Company
Wichita, KS
4 inspections $17,000
Ifco Systems N.a., INC.
Valdosta, GA
2 inspections $17,000

Compare Aacron INC DBA Aacron Anodizing vs Dal-Tile Distribution, INC. side-by-side →

What to do with this record

Use Aacron INC DBA Aacron Anodizing's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Aacron INC DBA Aacron Anodizing against Dal-Tile Distribution, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Aacron INC DBA Aacron Anodizing's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Aacron INC DBA Aacron Anodizing safe to work at? ▼
Based on OSHA records, Aacron INC DBA Aacron Anodizing's workplace safety record is concerning, with multiple serious compliance issues. The employer has 21 violations across 4 inspections, including 14 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Aacron INC DBA Aacron Anodizing have? ▼
Aacron INC DBA Aacron Anodizing has 21 OSHA violations on record, including 14 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $17,000.
How many OSHA inspections has Aacron INC DBA Aacron Anodizing had? ▼
Aacron INC DBA Aacron Anodizing has had 4 OSHA inspections, with the first recorded on 2012-03-27 and the most recent on 2015-09-22. This averages 5.3 violations per inspection.
What is the total penalty amount for Aacron INC DBA Aacron Anodizing? ▼
Aacron INC DBA Aacron Anodizing has been assessed $17,000 in current OSHA penalties, reduced from an initial assessment of $39,300 (a 56.7% reduction).
Does Aacron INC DBA Aacron Anodizing have any serious or willful violations? ▼
Yes. Aacron INC DBA Aacron Anodizing has 14 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Aacron INC DBA Aacron Anodizing operate in? ▼
Aacron INC DBA Aacron Anodizing operates in the Manufacturing sector (NAICS code 332813). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Aacron INC DBA Aacron Anodizing rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Aacron INC DBA Aacron Anodizing ranks #21,132 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Aacron INC DBA Aacron Anodizing's safety record compare to industry average? ▼
Aacron INC DBA Aacron Anodizing's total OSHA penalty of $17,000 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Ifco Systems N.a., INC. in Valdosta, GA is a similar manufacturing employer with $17,000 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.