Manufacturing · Portland, OR

A & C Foundry Products INC

According to OSHA enforcement records (2010–2026), A & C Foundry Products INC ranks #69,308 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 35 violations across 3 inspections.

Lower half by penalty86% serious
$2,865
OSHA penalties
35
Violations cited
3
OSHA inspections
#69,308
of 99,447 penalized employers

A & C Foundry Products INC in Portland, OR has been the subject of 3 OSHA workplace inspections and 35 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,865. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected A & C Foundry Products INC 3 times over 1 year - more than twice a year on average. These inspections turned up 35 violations, averaging 11.7 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #69,308 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 30 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Fong Kee Tofu CO. INC. in San Francisco, CA is another manufacturing employer with 2 OSHA inspections on record and $2,865 in current penalties.

11.7
violations per inspection
85.7%
of violations were serious
#69,308
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 35 violations across 3 OSHA inspections (11.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How A & C Foundry Products INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows A & C Foundry Products INC runs well below peers (0.18x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,865 Top 30% most affordable more affordable than 70% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is A & C Foundry Products INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0015.530.946.461.9OSHA inspectionsViolations citedMAPLEGROVE GLUTEN FR…, OSHA inspections: 3 · Violations cited: 52HEIDELBERG MATERIALS…, OSHA inspections: 3 · Violations cited: 16SWISS AMERICAN CDMO …, OSHA inspections: 3 · Violations cited: 9CORBITT MANUFACTURIN…, OSHA inspections: 3 · Violations cited: 21FULLER INDUSTRIES, I…, OSHA inspections: 3 · Violations cited: 7AA FOUNDRIES, INC., OSHA inspections: 3 · Violations cited: 59DEB EL FOOD PRODUCTS…, OSHA inspections: 3 · Violations cited: 27MAGIC PLASTICS, INC., OSHA inspections: 3 · Violations cited: 14SWIFT INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 21GRADALL INDUSTRIES, …, OSHA inspections: 3 · Violations cited: 9SCHWABE NORTH AMERIC…, OSHA inspections: 3 · Violations cited: 10CLAREMONT FOODS, LLC, OSHA inspections: 3 · Violations cited: 9WINPAK HEAT SEAL COR…, OSHA inspections: 3 · Violations cited: 6PACTIV LLC, OSHA inspections: 3 · Violations cited: 4BLUE BELL CREAMERIES…, OSHA inspections: 3 · Violations cited: 10FARLEY'S & SATHERS C…, OSHA inspections: 3 · Violations cited: 15INTERPRINT, INC., OSHA inspections: 3 · Violations cited: 2TH FOODS, INC., OSHA inspections: 3 · Violations cited: 7CABOT COACH BUILDERS…, OSHA inspections: 3 · Violations cited: 20HOLLINGSWORTH & VOSE…, OSHA inspections: 3 · Violations cited: 4A & C Foundry Produc…, OSHA inspections: 3 · Violations cited: 35
A & C Foundry Products INC has 3 OSHA inspections on record and 35 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

A & C Foundry Products INC in the Manufacturing enforcement ledger

In Manufacturing, A & C Foundry Products INC sits at penalty rank #27,639 of 35,243 penalized establishments ($2,865 assessed).

How A & C Foundry Products INC Compares

A & C Foundry Products INC's 11.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.18x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-08-31

Last Inspection

2011-01-26

Inspection Span

1 yr

Violations / Inspection

11.7

Avg Penalty / Inspection

$955

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 11.7 violations per visit. That's $955 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

30

Serious

85.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

14.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,565

Current Penalty Amount

$2,865

Penalty Reduction

48.5%

What this shows Penalties were reduced by $2,700 from the initial assessment of $5,565. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How A & C Foundry Products INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric A & C Foundry Products INC Industry Avg
Inspections 3 2.6
Violations 35 8.0
Total Penalty $2,865 $15,763
Avg Penalty per Inspection $955 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for A & C Foundry Products INC, both outside OR so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare A & C Foundry Products INC vs Fong Kee Tofu CO. INC. side-by-side →

What to do with this record

Use A & C Foundry Products INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare A & C Foundry Products INC against Fong Kee Tofu CO. INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether A & C Foundry Products INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is A & C Foundry Products INC safe to work at?
Based on OSHA records, A & C Foundry Products INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 35 violations across 3 inspections, including 30 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does A & C Foundry Products INC have?
A & C Foundry Products INC has 35 OSHA violations on record, including 30 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,865.
How many OSHA inspections has A & C Foundry Products INC had?
A & C Foundry Products INC has had 3 OSHA inspections, with the first recorded on 2010-08-31 and the most recent on 2011-01-26. This averages 11.7 violations per inspection.
What is the total penalty amount for A & C Foundry Products INC?
A & C Foundry Products INC has been assessed $2,865 in current OSHA penalties, reduced from an initial assessment of $5,565 (a 48.5% reduction).
Does A & C Foundry Products INC have any serious or willful violations?
Yes. A & C Foundry Products INC has 30 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does A & C Foundry Products INC operate in?
A & C Foundry Products INC operates in the Manufacturing sector (NAICS code 331524). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does A & C Foundry Products INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, A & C Foundry Products INC ranks #69,308 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does A & C Foundry Products INC's safety record compare to industry average?
A & C Foundry Products INC's total OSHA penalty of $2,865 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fong Kee Tofu CO. INC. in San Francisco, CA is a similar manufacturing employer with $2,865 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.