PlainWorker
Employers › NY

Manufacturing · Albany, NY

Yincae Advanced Materials, LLC

According to OSHA enforcement records (2010–2026), Yincae Advanced Materials, LLC ranks #55,646 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 6 violations across 3 inspections.

Lower half by penalty33% serious
$4,965
OSHA penalties
6
Violations cited
3
OSHA inspections
#55,646
of 99,447 penalized employers

Yincae Advanced Materials, LLC in Albany, NY has been the subject of 3 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,965. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Yincae Advanced Materials, LLC 3 times across a longer 7-year span, an infrequent cadence. These inspections resulted in 6 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #55,646 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Fargo Truss Systems, INC in West Fargo, ND is another manufacturing employer with 2 OSHA inspections on record and $4,966 in current penalties.

2.0
violations per inspection
33.3%
of violations were serious
#55,646
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 6 violations across 3 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Yincae Advanced Materials, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Yincae Advanced Materials, LLC runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,965 Top 44% most affordable more affordable than 56% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Yincae Advanced Materials, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.912.52435.647.1OSHA inspectionsViolations citedCARL'S DONUTS, INC., OSHA inspections: 3 · Violations cited: 24PJ TRAILERS MFG. CO.…, OSHA inspections: 3 · Violations cited: 12UTEX INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 12KNOUSE FOODS, INC., OSHA inspections: 3 · Violations cited: 7MILLENNIUM STEERING, OSHA inspections: 3 · Violations cited: 45DEUS MODERN, LLC, OSHA inspections: 3 · Violations cited: 26DARIO'S PALLETS, CORP., OSHA inspections: 3 · Violations cited: 12ELGIN INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 3MULLICAN FLOORING, L…, OSHA inspections: 3 · Violations cited: 5POLYESTER FIBERS, LLC, OSHA inspections: 3 · Violations cited: 7MNP CORPORATION, OSHA inspections: 3 · Violations cited: 21WIRETECH FABRICATORS…, OSHA inspections: 3 · Violations cited: 14LINEAR MOTION LLC, OSHA inspections: 3 · Violations cited: 12WISCONSIN PRECISION …, OSHA inspections: 3 · Violations cited: 5LASLO CUSTOM KITCHEN…, OSHA inspections: 3 · Violations cited: 15PIMA VALVE, LLC, OSHA inspections: 3 · Violations cited: 7STOUTENBURG INC DBA …, OSHA inspections: 3 · Violations cited: 26CONSUMERS CONCRETE C…, OSHA inspections: 3 · Violations cited: 12YOUNGSTOWN PIPE AND …, OSHA inspections: 3 · Violations cited: 4HUGHES ANDERSON HEAT…, OSHA inspections: 3 · Violations cited: 5Yincae Advanced Mate…, OSHA inspections: 3 · Violations cited: 6
Yincae Advanced Materials, LLC has 3 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Yincae Advanced Materials, LLC in the Manufacturing enforcement ledger

In Manufacturing, Yincae Advanced Materials, LLC sits at penalty rank #23,179 of 35,243 penalized establishments ($4,965 assessed).

How Yincae Advanced Materials, LLC Compares

Yincae Advanced Materials, LLC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2018-12-18

Last Inspection

2025-11-26

Inspection Span

7 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$1,655

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 7 years, averaging 2.0 violations per visit. That's $1,655 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

33.3% of total

0

Willful

0.0% of total

1

Repeat

16.7% of total

3

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$13,490

Current Penalty Amount

$4,965

Penalty Reduction

63.2%

What this shows Penalties were reduced by $8,525 from the initial assessment of $13,490. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Yincae Advanced Materials, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Yincae Advanced Materials, LLC Industry Avg
Inspections 3 2.6
Violations 6 8.0
Total Penalty $4,965 $15,763
Avg Penalty per Inspection $1,655 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Yincae Advanced Materials, LLC, both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($4,965 here).

Knauss Foods, LLC $4,965 PA Whitehead Die Casting INC. $4,966 GA Fargo Truss Systems, INC $4,966 ND CRC Mastercraft, INC. $4,966 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Carl's Donuts, INC. 3 insp. Las Vegas, NV PJ Trailers MFG. CO., INC. 3 insp. Sumner, TX Utex Industries, INC. 3 insp. Conroe, TX Knouse Foods, INC. 3 insp. Peach Glen, PA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Mercury Paint Corporation
Brooklyn, NY
2 inspections $4,965
Knauss Foods, LLC
Quakertown, PA
2 inspections $4,965
Whitehead Die Casting INC.
Gainesville, GA
2 inspections $4,966
Fargo Truss Systems, INC
West Fargo, ND
2 inspections $4,966
CRC Mastercraft, INC.
Houston, TX
2 inspections $4,966

Compare Yincae Advanced Materials, LLC vs Mercury Paint Corporation side-by-side →

What to do with this record

Use Yincae Advanced Materials, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Yincae Advanced Materials, LLC against Mercury Paint Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Yincae Advanced Materials, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Yincae Advanced Materials, LLC safe to work at? ▼
Based on OSHA records, Yincae Advanced Materials, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 6 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Yincae Advanced Materials, LLC have? ▼
Yincae Advanced Materials, LLC has 6 OSHA violations on record, including 2 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $4,965.
How many OSHA inspections has Yincae Advanced Materials, LLC had? ▼
Yincae Advanced Materials, LLC has had 3 OSHA inspections, with the first recorded on 2018-12-18 and the most recent on 2025-11-26. This averages 2.0 violations per inspection.
What is the total penalty amount for Yincae Advanced Materials, LLC? ▼
Yincae Advanced Materials, LLC has been assessed $4,965 in current OSHA penalties, reduced from an initial assessment of $13,490 (a 63.2% reduction).
Does Yincae Advanced Materials, LLC have any serious or willful violations? ▼
Yes. Yincae Advanced Materials, LLC has 2 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Yincae Advanced Materials, LLC operate in? ▼
Yincae Advanced Materials, LLC operates in the Manufacturing sector (NAICS code 325510). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Yincae Advanced Materials, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Yincae Advanced Materials, LLC ranks #55,646 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Yincae Advanced Materials, LLC's safety record compare to industry average? ▼
Yincae Advanced Materials, LLC's total OSHA penalty of $4,965 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fargo Truss Systems, INC in West Fargo, ND is a similar manufacturing employer with $4,966 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.