PlainWorker
Employers › WI

Manufacturing · Pound, WI

Woller Precision Machine LLC

According to OSHA enforcement records (2010–2026), Woller Precision Machine LLC ranks #79,607 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 2 inspections.

Lower half by penalty60% serious
$1,680
OSHA penalties
5
Violations cited
2
OSHA inspections
#79,607
of 99,447 penalized employers

Woller Precision Machine LLC in Pound, WI has been the subject of 2 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,680. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Woller Precision Machine LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 5 violations, averaging 2.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #79,607 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Brothers Equipment, INC. in Cleveland, OH is another manufacturing employer with 2 OSHA inspections on record and $1,680 in current penalties.

2.5
violations per inspection
60.0%
of violations were serious
#79,607
of 99,447 penalized employers

Compliance score

D 54/100
  • D OSHA safety compliance: 5 violations across 2 OSHA inspections (2.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Woller Precision Machine LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Woller Precision Machine LLC runs well below peers (0.11x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,680 Top 20% most affordable more affordable than 80% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Woller Precision Machine LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.39.719.028.437.7OSHA inspectionsViolations citedWAREHOUSE 2000 INC, OSHA inspections: 2 · Violations cited: 34MARSHALL DURBIN COMP…, OSHA inspections: 2 · Violations cited: 16PRODUCERS MEAT & PRO…, OSHA inspections: 2 · Violations cited: 10Vasq Sheetmetal LLC, OSHA inspections: 2 · Violations cited: 8ESTAD STAMPING & MFG…, OSHA inspections: 2 · Violations cited: 21CARPENTER CONTRACTOR…, OSHA inspections: 2 · Violations cited: 36KEYSTONE CONSOLIDATE…, OSHA inspections: 2 · Violations cited: 2NOVAGARD SOLUTIONS, …, OSHA inspections: 2 · Violations cited: 2TELLA TOOL & MFG. CO., OSHA inspections: 2 · Violations cited: 7HIGGINS SUPPLY COMPA…, OSHA inspections: 2 · Violations cited: 17NORANDAL USA INC, OSHA inspections: 2 · Violations cited: 21PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5BOARDMAN, INC., OSHA inspections: 2 · Violations cited: 14PLANET STONE, INC., OSHA inspections: 2 · Violations cited: 9PACIFIC COAST SEAFOOD, OSHA inspections: 2 · Violations cited: 13TECHNICAL POLYMERS, …, OSHA inspections: 2 · Violations cited: 16HILL PHOENIX, INC., OSHA inspections: 2 · Violations cited: 8PROCESSBARRON D/B/A …, OSHA inspections: 2 · Violations cited: 12JOHNSON CONTROLS, INC, OSHA inspections: 2 · Violations cited: 4JADA WINDOWS, OSHA inspections: 2 · Violations cited: 3Woller Precision Mac…, OSHA inspections: 2 · Violations cited: 5
Woller Precision Machine LLC has 2 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Woller Precision Machine LLC in the Manufacturing enforcement ledger

Manufacturing sector: Woller Precision Machine LLC is the #30,572 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($1,680).

How Woller Precision Machine LLC Compares

Woller Precision Machine LLC's 2.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.11x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-11-23

Last Inspection

2011-11-23

Inspection Span

1 yr

Violations / Inspection

2.5

Avg Penalty / Inspection

$840

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.5 violations per visit. That's $840 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

60.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

40.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,400

Current Penalty Amount

$1,680

Penalty Reduction

30.0%

What this shows Penalties were reduced by $720 from the initial assessment of $2,400. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Woller Precision Machine LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Woller Precision Machine LLC Industry Avg
Inspections 2 2.6
Violations 5 8.0
Total Penalty $1,680 $15,763
Avg Penalty per Inspection $840 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Woller Precision Machine LLC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,680 here).

Cornerstone Builders of SW Florida, INC. $1,680 FL Precision Sintered Parts, L.L.C. $1,680 OK Valley Storm Shelters, LLC $1,680 AL Summit Machine, LLC $1,680 NV

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Warehouse 2000 INC 2 insp. Firebaugh, CA Marshall Durbin Companies 2 insp. Hattiesburg, MS Producers Meat & Provisions, INC. 2 insp. San Diego, CA Vasq Sheetmetal LLC 2 insp. Arlington, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Edw. C. Levy CO.
Detroit, MI
2 inspections $1,680
Hysitron Incorporated
Eden Prairie, MN
2 inspections $1,680
Ultium Cells LLC
Lansing, MI
2 inspections $1,680
Axxis CORP
Canton, MI
3 inspections $1,680
Brothers Equipment, INC.
Cleveland, OH
2 inspections $1,680

Compare Woller Precision Machine LLC vs Edw. C. Levy CO. side-by-side →

What to do with this record

Use Woller Precision Machine LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Woller Precision Machine LLC against Edw. C. Levy CO., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Woller Precision Machine LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Woller Precision Machine LLC safe to work at? ▼
Based on OSHA records, Woller Precision Machine LLC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Woller Precision Machine LLC have? ▼
Woller Precision Machine LLC has 5 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,680.
How many OSHA inspections has Woller Precision Machine LLC had? ▼
Woller Precision Machine LLC has had 2 OSHA inspections, with the first recorded on 2011-11-23 and the most recent on 2011-11-23. This averages 2.5 violations per inspection.
What is the total penalty amount for Woller Precision Machine LLC? ▼
Woller Precision Machine LLC has been assessed $1,680 in current OSHA penalties, reduced from an initial assessment of $2,400 (a 30.0% reduction).
Does Woller Precision Machine LLC have any serious or willful violations? ▼
Yes. Woller Precision Machine LLC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Woller Precision Machine LLC operate in? ▼
Woller Precision Machine LLC operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Woller Precision Machine LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Woller Precision Machine LLC ranks #79,607 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Woller Precision Machine LLC's safety record compare to industry average? ▼
Woller Precision Machine LLC's total OSHA penalty of $1,680 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Brothers Equipment, INC. in Cleveland, OH is a similar manufacturing employer with $1,680 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.