PlainWorker
Employers › TX

Manufacturing · San Antonio, TX

Wire-Tech Manufacturing Corporation

OSHA records show a relatively clean safety record: 1 violations across 2 inspections - below the Manufacturing industry average for penalties.

2
OSHA inspections
1
Violations cited
$2,074
OSHA penalties

Wire-Tech Manufacturing Corporation in San Antonio, TX has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,074. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

Wire-Tech Manufacturing Corporation has been inspected 2 times by OSHA over 2 years. These inspections resulted in 1 violations, averaging 0.5 violations per inspection. Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, Wire-Tech Manufacturing Corporation has been inspected fewer frequently.

0.5
violations per inspection
100.0%
of violations were serious
0.15×
Manufacturing industry-avg penalty

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Wire-Tech Manufacturing Corporation sits below the Manufacturing per-employer average, a comparatively lighter enforcement footprint than its peers.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,074 Top 24% most affordable more affordable than 76% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Wire-Tech Manufacturing Corporation

The federal enforcement record for Wire-Tech Manufacturing Corporation in San Antonio, TX includes 2 OSHA inspections and 1 violation, translating to 0.50 violations per inspection. Of those violations, 1 (100.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $2,074 in initial penalties against this employer, later adjusted to a current total of $2,074 - no reduction from the original assessment. Average penalty per inspection works out to $1,037. Against the Manufacturing industry average of $13,610 per employer, this record runs below peers.

Inspection activity spans from 2024-01-17 to 2026-03-31, a window of roughly 2 years. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
2
First Inspection
2024-01-17
Last Inspection
2026-03-31
Inspection Span
2 years
Violations per Inspection
0.5
Avg Penalty per Inspection
$1,037
Industry Avg per Inspection
$5,310

Violation Breakdown

1
Serious
100.0% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
0
Other-Than-Serious
0.0% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$2,074
Current Penalty Amount
$2,074
Penalty Reduction
None

Industry Safety Context: Manufacturing

How Wire-Tech Manufacturing Corporation compares to the Manufacturing sector, which has 23,467 employers tracked by PlainWorker.

Metric Wire-Tech Manufacturing Corporation Industry Avg
Inspections 2 2.6
Violations 1 8.2
Total Penalty $2,074 $13,610
Avg Penalty per Inspection $1,037 $5,310
View all 23,467 employers in Manufacturing →

Explore related data

Manufacturing safety record →

Inspections, violations, and penalties across the Manufacturing sector.
TX enforcement →

Top violators and statewide OSHA & WHD totals for TX.
Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process
How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes
Your Rights Under OSHA

Know your workplace safety rights and how to exercise them
Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages
Most Dangerous Industries

Which industries face the highest rates of violations and penalties
Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Manufacturing

Daehan Solution Nevada, LLC.
Fernley, NV
7 inspections $4.70M
Joon, LLC
Cusseta, AL
8 inspections $2.55M
Sunfield, INC.
Hebron, OH
8 inspections $2.51M
Byton North America
Santa Clara, CA
0 inspections $0
Republic Steel
Canton, OH
20 inspections $1.64M

Compare Wire-Tech Manufacturing Corporation vs Daehan Solution Nevada, LLC. side-by-side →

Frequently Asked Questions

Is Wire-Tech Manufacturing Corporation safe to work at? ▼
Based on OSHA records, Wire-Tech Manufacturing Corporation's workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Wire-Tech Manufacturing Corporation have? ▼
Wire-Tech Manufacturing Corporation has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,074.
How many OSHA inspections has Wire-Tech Manufacturing Corporation had? ▼
Wire-Tech Manufacturing Corporation has had 2 OSHA inspections, with the first recorded on 2024-01-17 and the most recent on 2026-03-31. This averages 0.5 violations per inspection.
What is the total penalty amount for Wire-Tech Manufacturing Corporation? ▼
Wire-Tech Manufacturing Corporation has been assessed $2,074 in current OSHA penalties.
Does Wire-Tech Manufacturing Corporation have any serious or willful violations? ▼
Yes. Wire-Tech Manufacturing Corporation has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Wire-Tech Manufacturing Corporation operate in? ▼
Wire-Tech Manufacturing Corporation operates in the Manufacturing sector (NAICS code 332710). This industry has 23,467 employers tracked by PlainWorker, with 60,152 total OSHA inspections and $319.38M in cumulative penalties.
What are my rights if I work at Wire-Tech Manufacturing Corporation? ▼
Under the Occupational Safety and Health Act, employees at Wire-Tech Manufacturing Corporation have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against Wire-Tech Manufacturing Corporation? ▼
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does Wire-Tech Manufacturing Corporation's safety record compare to industry average? ▼
Wire-Tech Manufacturing Corporation's total OSHA penalty of $2,074 is below the Manufacturing industry average of $13,610 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer.

Explore PlainWorker

Manufacturing Industry

All 23,467 employers in this sector
Employers in TX

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Wire-Tech Manufacturing Corporation's record is one establishment in a larger pattern, compare it before you draw conclusions.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Read our methodology - how this data is sourced, computed, and verified.

Verify with OSHA establishment search →