PlainWorker
Employers › NJ

Manufacturing · East Hanover, NJ

Win-Tech Precision Products, INC.

According to OSHA enforcement records (2010–2026), Win-Tech Precision Products, INC. ranks #87,866 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 2 inspections.

Lower half by penalty100% serious
$900
OSHA penalties
1
Violations cited
2
OSHA inspections
#87,866
of 99,447 penalized employers

Win-Tech Precision Products, INC. in East Hanover, NJ has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $900. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Win-Tech Precision Products, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #87,866 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Rings of Wood L.L.C. in Tucson, AZ is another manufacturing employer with 2 OSHA inspections on record and $900 in current penalties.

0.5
violations per inspection
100.0%
of violations were serious
#87,866
of 99,447 penalized employers

Compliance score

B 83/100
  • B OSHA safety compliance: 1 violation across 2 OSHA inspections (0.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Win-Tech Precision Products, INC. runs well below peers (0.06x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$900 Top 12% most affordable more affordable than 88% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Win-Tech Precision Products, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0016.833.650.467.2OSHA inspectionsViolations citedLAROSE INDUSTRIES, LLC, OSHA inspections: 2 · Violations cited: 17OPTIMA STANTRON CORP…, OSHA inspections: 2 · Violations cited: 31ADVANTAGE POWDER COA…, OSHA inspections: 2 · Violations cited: 16STRAUSS FEEDS, L.L.C., OSHA inspections: 2 · Violations cited: 28PARKER- HANNIFIN COR…, OSHA inspections: 2 · Violations cited: 14ADONEL CONCRETE CORP., OSHA inspections: 2 · Violations cited: 20REHRIG PACIFIC COMPANY, OSHA inspections: 2 · Violations cited: 8ILPEA INDUSTRIES INC., OSHA inspections: 2 · Violations cited: 8SHEDS UNLIMITED LLC, OSHA inspections: 2 · Violations cited: 20MUELLER COPPER TUBE …, OSHA inspections: 2 · Violations cited: 18SHELL OIL PRODUCTS C…, OSHA inspections: 2 · Violations cited: 8HEBCO PRODUCTS INC., OSHA inspections: 2 · Violations cited: 14TEMPCO ELECTRIC HEAT…, OSHA inspections: 2 · Violations cited: 6QUALITY ENGINEERED S…, OSHA inspections: 2 · Violations cited: 64DAVISCO FOODS INTERN…, OSHA inspections: 2 · Violations cited: 21ADVANCED STROBE PROD…, OSHA inspections: 2 · Violations cited: 31AVIENT CORPORATION, OSHA inspections: 2 · Violations cited: 6SIMPLY NATURAL FOODS…, OSHA inspections: 2 · Violations cited: 11BORGHI USA INC., OSHA inspections: 2 · Violations cited: 8KALINICH FENCE COMPANY, OSHA inspections: 2 · Violations cited: 17Win-Tech Precision P…, OSHA inspections: 2 · Violations cited: 1
Win-Tech Precision Products, INC. has 2 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Win-Tech Precision Products, INC. in the Manufacturing enforcement ledger

In Manufacturing, Win-Tech Precision Products, INC. sits at penalty rank #32,636 of 35,243 penalized establishments ($900 assessed).

How Win-Tech Precision Products, INC. Compares

Win-Tech Precision Products, INC.'s 0.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.06x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-10-10

Last Inspection

2013-02-07

Inspection Span

1 yr

Violations / Inspection

0.5

Avg Penalty / Inspection

$450

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 0.5 violations per visit. That's $450 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,200

Current Penalty Amount

$900

Penalty Reduction

25.0%

What this shows Penalties were reduced by $300 from the initial assessment of $1,200. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Win-Tech Precision Products, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Win-Tech Precision Products, INC. Industry Avg
Inspections 2 2.6
Violations 1 8.0
Total Penalty $900 $15,763
Avg Penalty per Inspection $450 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Win-Tech Precision Products, INC., both outside NJ so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($900 here).

Primera $900 AZ Talon, INC. $900 VA GCM North American Aerospace L $900 WA Piedmont Concrete, INC $900 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Larose Industries, LLC 2 insp. Fayette, OH Optima Stantron CORP. Div of Elma Electronic INC. 2 insp. Lawrenceville, GA Advantage Powder Coating, INC. 2 insp. Defiance, OH Strauss Feeds, L.L.C. 2 insp. Watertown, WI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Talon, INC.
Leesburg, VA
2 inspections $900
Piedmont Concrete, INC
Farmington Hills, MI
2 inspections $900
Rings of Wood L.L.C.
Tucson, AZ
2 inspections $900
Tom's Metal Specialists, INC.
San Francisco, CA
2 inspections $900
National Block Company INC
Westland, MI
3 inspections $900

Compare Win-Tech Precision Products, INC. vs Talon, INC. side-by-side →

What to do with this record

Use Win-Tech Precision Products, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Win-Tech Precision Products, INC. against Talon, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Win-Tech Precision Products, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Win-Tech Precision Products, INC. safe to work at? ▼
Based on OSHA records, Win-Tech Precision Products, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Win-Tech Precision Products, INC. have? ▼
Win-Tech Precision Products, INC. has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $900.
How many OSHA inspections has Win-Tech Precision Products, INC. had? ▼
Win-Tech Precision Products, INC. has had 2 OSHA inspections, with the first recorded on 2012-10-10 and the most recent on 2013-02-07. This averages 0.5 violations per inspection.
What is the total penalty amount for Win-Tech Precision Products, INC.? ▼
Win-Tech Precision Products, INC. has been assessed $900 in current OSHA penalties, reduced from an initial assessment of $1,200 (a 25.0% reduction).
Does Win-Tech Precision Products, INC. have any serious or willful violations? ▼
Yes. Win-Tech Precision Products, INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Win-Tech Precision Products, INC. operate in? ▼
Win-Tech Precision Products, INC. operates in the Manufacturing sector (NAICS code 333993). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Win-Tech Precision Products, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Win-Tech Precision Products, INC. ranks #87,866 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Win-Tech Precision Products, INC.'s safety record compare to industry average? ▼
Win-Tech Precision Products, INC.'s total OSHA penalty of $900 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Rings of Wood L.L.C. in Tucson, AZ is a similar manufacturing employer with $900 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.