PlainWorker
Employers › MI

Manufacturing · PLYMOUTH, MI

WESTSIDE FABRICATION AND MACHINING

OSHA records show a concerning safety record: 9 violations across 2 inspections — below the Manufacturing industry average for penalties.

2
OSHA inspections
9
Violations cited
$300
OSHA penalties

WESTSIDE FABRICATION AND MACHINING in PLYMOUTH, MI has been the subject of 2 OSHA workplace inspections and 9 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $300. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

WESTSIDE FABRICATION AND MACHINING has been inspected 2 times by OSHA over 1 year. These inspections resulted in 9 violations, averaging 4.5 violations per inspection. Of these, 5 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, WESTSIDE FABRICATION AND MACHINING has been inspected fewer frequently.

4.5
violations per inspection
55.6%
of violations were serious
0.02×
Manufacturing industry-avg penalty

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows WESTSIDE FABRICATION AND MACHINING sits below the Manufacturing per-employer average, a comparatively lighter enforcement footprint than its peers.

Source U.S. Department of Labor — OSHA enforcement extracts As of 2026

What the Data Says About WESTSIDE FABRICATION AND MACHINING

The federal enforcement record for WESTSIDE FABRICATION AND MACHINING in PLYMOUTH, MI includes 2 OSHA inspections and 9 violations, translating to 4.50 violations per inspection. Of those violations, 5 (55.6%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $600 in initial penalties against this employer, later adjusted to a current total of $300 — a 50.0% reduction. Average penalty per inspection works out to $150. Against the Manufacturing industry average of $13,853 per employer, this record runs below peers.

Inspection activity spans from 2012-12-13 to 2012-12-13, a window of roughly 1 year. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
2
First Inspection
2012-12-13
Last Inspection
2012-12-13
Inspection Span
1 year
Violations per Inspection
4.5
Avg Penalty per Inspection
$150
Industry Avg per Inspection
$5,418

Violation Breakdown

5
Serious
55.6% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
4
Other-Than-Serious
44.4% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$600
Current Penalty Amount
$300
Penalty Reduction
50.0%

Penalties were reduced by $300 from the initial assessment of $600. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How WESTSIDE FABRICATION AND MACHINING compares to the Manufacturing sector, which has 23,042 employers tracked by PlainWorker.

Metric WESTSIDE FABRICATION AND MACHINING Industry Avg
Inspections 2 2.6
Violations 9 8.2
Total Penalty $300 $13,853
Avg Penalty per Inspection $150 $5,418
View all 23,042 employers in Manufacturing →

Explore related data

Manufacturing safety record →

Inspections, violations, and penalties across the Manufacturing sector.
MI enforcement →

Top violators and statewide OSHA & WHD totals for MI.
Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process
How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes
Your Rights Under OSHA

Know your workplace safety rights and how to exercise them
Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages
Most Dangerous Industries

Which industries face the highest rates of violations and penalties
Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Manufacturing

DAEHAN SOLUTION NEVADA, LLC.
FERNLEY, NV
7 inspections $4.70M
JOON, LLC
CUSSETA, AL
8 inspections $2.55M
SUNFIELD, INC.
HEBRON, OH
8 inspections $2.51M
Byton North America
Santa Clara, CA
0 inspections $0
REPUBLIC STEEL
CANTON, OH
20 inspections $1.64M

Compare WESTSIDE FABRICATION AND MACHINING vs DAEHAN SOLUTION NEVADA, LLC. side-by-side →

Frequently Asked Questions

Is WESTSIDE FABRICATION AND MACHINING safe to work at? ▼
Based on OSHA records, WESTSIDE FABRICATION AND MACHINING's workplace safety record is concerning, with multiple serious compliance issues. The employer has 9 violations across 2 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does WESTSIDE FABRICATION AND MACHINING have? ▼
WESTSIDE FABRICATION AND MACHINING has 9 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $300.
How many OSHA inspections has WESTSIDE FABRICATION AND MACHINING had? ▼
WESTSIDE FABRICATION AND MACHINING has had 2 OSHA inspections, with the first recorded on 2012-12-13 and the most recent on 2012-12-13. This averages 4.5 violations per inspection.
What is the total penalty amount for WESTSIDE FABRICATION AND MACHINING? ▼
WESTSIDE FABRICATION AND MACHINING has been assessed $300 in current OSHA penalties, reduced from an initial assessment of $600 (a 50.0% reduction).
Does WESTSIDE FABRICATION AND MACHINING have any serious or willful violations? ▼
Yes. WESTSIDE FABRICATION AND MACHINING has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does WESTSIDE FABRICATION AND MACHINING operate in? ▼
WESTSIDE FABRICATION AND MACHINING operates in the Manufacturing sector (NAICS code 332312). This industry has 23,042 employers tracked by PlainWorker, with 58,916 total OSHA inspections and $319.21M in cumulative penalties.
What are my rights if I work at WESTSIDE FABRICATION AND MACHINING? ▼
Under the Occupational Safety and Health Act, employees at WESTSIDE FABRICATION AND MACHINING have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against WESTSIDE FABRICATION AND MACHINING? ▼
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does WESTSIDE FABRICATION AND MACHINING's safety record compare to industry average? ▼
WESTSIDE FABRICATION AND MACHINING's total OSHA penalty of $300 is below the Manufacturing industry average of $13,853 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer.

Explore PlainWorker

Manufacturing Industry

All 23,042 employers in this sector
Employers in MI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Read our methodology — how this data is sourced, computed, and verified.

Verify with OSHA establishment search →