PlainWorker
Employers › OH

Manufacturing · Hubbard, OH

Warren Fabricating & Machining Corporation

According to OSHA enforcement records (2010–2026), Warren Fabricating & Machining Corporation ranks #6,572 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 20 violations across 3 inspections.

Top 10% by penalty85% serious
$41,948
OSHA penalties
20
Violations cited
3
OSHA inspections
#6,572
of 99,447 penalized employers

Warren Fabricating & Machining Corporation in Hubbard, OH has been the subject of 3 OSHA workplace inspections and 20 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $41,948. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Warren Fabricating & Machining Corporation 3 times across a longer 12-year span, an infrequent cadence. These inspections resulted in 20 violations, averaging 6.7 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #6,572 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, IPS International Paving Services in Mentone, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

6.7
violations per inspection
85.0%
of violations were serious
#6,572
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 20 violations across 3 OSHA inspections (6.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Warren Fabricating & Machining Corporation runs well above peers (2.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$41,948 Bottom 7% least affordable more affordable than 7% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). This entry sits in this band. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Warren Fabricating & Machining Corporation.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0314253647OSHA inspectionsViolations citedU.S. BATTERY MFG. AU…, OSHA inspections: 3 · Violations cited: 14TEKNIPLEX CONSUMER P…, OSHA inspections: 3 · Violations cited: 8AMARAL CUSTOM FABRIC…, OSHA inspections: 3 · Violations cited: 45AMERICAN HARDWOOD IN…, OSHA inspections: 3 · Violations cited: 9HOFFMAN CABINETS, INC., OSHA inspections: 3 · Violations cited: 18THE L.C. DOANE COMPANY, OSHA inspections: 3 · Violations cited: 14KICE INDUSTRIES INC., OSHA inspections: 3 · Violations cited: 5MATRIX WIRE, INC., OSHA inspections: 3 · Violations cited: 11TEMKIN INTERNATIONAL, OSHA inspections: 3 · Violations cited: 9TRI-MACK PLASTICS MA…, OSHA inspections: 3 · Violations cited: 10LOUISIANA-PACIFIC CO…, OSHA inspections: 3 · Violations cited: 6HARMSCO INC., OSHA inspections: 3 · Violations cited: 6BARTON MATERIALS, LLC, OSHA inspections: 3 · Violations cited: 7TRION INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 5TITAN TIRE CORPORATI…, OSHA inspections: 3 · Violations cited: 18METAL CULVERTS, INC., OSHA inspections: 3 · Violations cited: 19PRESQUE ISLE WINE CE…, OSHA inspections: 3 · Violations cited: 26POLYCELL PACKAGING C…, OSHA inspections: 3 · Violations cited: 15HEAT-TIMER CORPORATION, OSHA inspections: 3 · Violations cited: 8MILLENNIUM METALS, I…, OSHA inspections: 3 · Violations cited: 19Warren Fabricating &…, OSHA inspections: 3 · Violations cited: 20
Warren Fabricating & Machining Corporation has 3 OSHA inspections on record and 20 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Warren Fabricating & Machining Corporation in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Warren Fabricating & Machining Corporation ranks #3,304 at $41,948 current penalty.

How Warren Fabricating & Machining Corporation Compares

Warren Fabricating & Machining Corporation's 6.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-06-15

Last Inspection

2023-01-26

Inspection Span

12 yrs

Violations / Inspection

6.7

Avg Penalty / Inspection

$13,983

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 12 years, averaging 6.7 violations per visit. That's $13,983 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

17

Serious

85.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

15.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$87,063

Current Penalty Amount

$41,948

Penalty Reduction

51.8%

What this shows Penalties were reduced by $45,115 from the initial assessment of $87,063. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Warren Fabricating & Machining Corporation compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Warren Fabricating & Machining Corporation Industry Avg
Inspections 3 2.6
Violations 20 8.0
Total Penalty $41,948 $15,763
Avg Penalty per Inspection $13,983 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Warren Fabricating & Machining Corporation, both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($41,948 here).

Heat Treating Services Corporation of America $41,950 MI Daejin Advanced Materials USA INC $41,940 MI Unverferth Manufacturing CO. INC. $41,936 IA McDowell Packaging & Advertising CO, INC $41,931 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

U.S. Battery MFG. Augusta, INC. 3 insp. Augusta, GA Tekniplex Consumer Products 3 insp. Dublin, VA Amaral Custom Fabrications INC. 3 insp. Rumford, RI American Hardwood Industries, LLC 3 insp. Waynesboro, VA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Heat Treating Services Corporation of America
Pontiac, MI
9 inspections $41,950
Daejin Advanced Materials USA INC
Adrian, MI
6 inspections $41,940
Unverferth Manufacturing CO. INC.
Shell Rock, IA
2 inspections $41,936
IPS International Paving Services
Mentone, CA
0 inspections $0
Apex Aluminum Die Casting CO., INC.
Piqua, OH
7 inspections $41,935

Compare Warren Fabricating & Machining Corporation vs Heat Treating Services Corporation of America side-by-side →

What to do with this record

Use Warren Fabricating & Machining Corporation's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Warren Fabricating & Machining Corporation against Heat Treating Services Corporation of America, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Warren Fabricating & Machining Corporation's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Warren Fabricating & Machining Corporation safe to work at? ▼
Based on OSHA records, Warren Fabricating & Machining Corporation's workplace safety record is concerning, with multiple serious compliance issues. The employer has 20 violations across 3 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Warren Fabricating & Machining Corporation have? ▼
Warren Fabricating & Machining Corporation has 20 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $41,948.
How many OSHA inspections has Warren Fabricating & Machining Corporation had? ▼
Warren Fabricating & Machining Corporation has had 3 OSHA inspections, with the first recorded on 2011-06-15 and the most recent on 2023-01-26. This averages 6.7 violations per inspection.
What is the total penalty amount for Warren Fabricating & Machining Corporation? ▼
Warren Fabricating & Machining Corporation has been assessed $41,948 in current OSHA penalties, reduced from an initial assessment of $87,063 (a 51.8% reduction).
Does Warren Fabricating & Machining Corporation have any serious or willful violations? ▼
Yes. Warren Fabricating & Machining Corporation has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Warren Fabricating & Machining Corporation operate in? ▼
Warren Fabricating & Machining Corporation operates in the Manufacturing sector (NAICS code 335312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Warren Fabricating & Machining Corporation rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Warren Fabricating & Machining Corporation ranks #6,572 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Warren Fabricating & Machining Corporation's safety record compare to industry average? ▼
Warren Fabricating & Machining Corporation's total OSHA penalty of $41,948 is above the Manufacturing industry average of $15,763 per employer (2.7x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, IPS International Paving Services in Mentone, CA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.