PlainWorker
Employers › MA

Manufacturing · Taunton, MA

V & S Taunton Galvanizing, LLC

According to OSHA enforcement records (2010–2026), V & S Taunton Galvanizing, LLC has a relatively clean safety record: 1 violations across 2 inspections. See the full breakdown below.

Lower half by penalty0% serious
$3,547
OSHA penalties
1
Violations cited
2
OSHA inspections
#65,067
of 100,495 penalized employers

V & S Taunton Galvanizing, LLC in Taunton, MA has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,547. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected V & S Taunton Galvanizing, LLC 2 times across a longer 12-year span, an infrequent cadence. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, FG Metalwork in Crockett, TX is another manufacturing employer with 2 OSHA inspections on record and $3,547 in current penalties.

0.5
violations per inspection
0.0%
of violations were serious
35%
of penalized employers rank lower

How V & S Taunton Galvanizing, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows V & S Taunton Galvanizing, LLC runs well below peers (0.23x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,547 Top 35% most affordable more affordable than 65% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About V & S Taunton Galvanizing, LLC

The federal enforcement record for V & S Taunton Galvanizing, LLC in Taunton, MA includes 2 OSHA inspections and 1 violation, translating to 0.50 violations per inspection. Of those violations, 0 (0.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat.

OSHA assessed $9,458 in initial penalties against this employer, later adjusted to a current total of $3,547 - a 62.5% reduction. Average penalty per inspection works out to $1,774. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.23x the sector average).

Inspection activity spans from 2014-02-20 to 2025-09-16, a window of roughly 12 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-02-20

Last Inspection

2025-09-16

Inspection Span

12 yrs

Violations / Inspection

0.5

Avg Penalty / Inspection

$1,774

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 12 years, averaging 0.5 violations per visit. That's $1,774 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,458

Current Penalty Amount

$3,547

Penalty Reduction

62.5%

What this shows Penalties were reduced by $5,911 from the initial assessment of $9,458. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How V & S Taunton Galvanizing, LLC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric V & S Taunton Galvanizing, LLC Industry Avg
Inspections 2 2.5
Violations 1 7.8
Total Penalty $3,547 $15,410
Avg Penalty per Inspection $1,774 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

FG Metalwork
Crockett, TX
2 inspections $3,547
PBR Manufacturing, Inc
Haltom City, TX
0 inspections $0
Goff Enterprises LLC
Longmont, CO
2 inspections $3,548
System Pavers
Ventura, CA
0 inspections $0
Taylor-Made Reman, LLC
Maplesville, AL
2 inspections $3,549

Compare V & S Taunton Galvanizing, LLC vs FG Metalwork side-by-side →

Frequently Asked Questions

Is V & S Taunton Galvanizing, LLC safe to work at? ▼
Based on OSHA records, V & S Taunton Galvanizing, LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does V & S Taunton Galvanizing, LLC have? ▼
V & S Taunton Galvanizing, LLC has 1 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,547.
How many OSHA inspections has V & S Taunton Galvanizing, LLC had? ▼
V & S Taunton Galvanizing, LLC has had 2 OSHA inspections, with the first recorded on 2014-02-20 and the most recent on 2025-09-16. This averages 0.5 violations per inspection.
What is the total penalty amount for V & S Taunton Galvanizing, LLC? ▼
V & S Taunton Galvanizing, LLC has been assessed $3,547 in current OSHA penalties, reduced from an initial assessment of $9,458 (a 62.5% reduction).
What industry does V & S Taunton Galvanizing, LLC operate in? ▼
V & S Taunton Galvanizing, LLC operates in the Manufacturing sector (NAICS code 332812). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does V & S Taunton Galvanizing, LLC's safety record compare to industry average? ▼
V & S Taunton Galvanizing, LLC's total OSHA penalty of $3,547 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, FG Metalwork in Crockett, TX is a similar manufacturing employer with $3,547 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

V & S Taunton Galvanizing, LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.