Manufacturing · Dalton, GA

Tuftco Finishing Systems, INC.

According to OSHA enforcement records (2010–2026), Tuftco Finishing Systems, INC. ranks #4,332 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 22 violations across 4 inspections.

Top 5% by penalty77% serious

Compiled by Plainworker · September 6, 2026

$56,150
OSHA penalties: 22
Violations cited: 4
OSHA inspections: #4,332
of 99,447 penalized employers

Tuftco Finishing Systems, INC. in Dalton, GA has been the subject of 4 OSHA workplace inspections and 22 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $56,150. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tuftco Finishing Systems, INC. 4 times over 5 years, roughly once every couple of years. These inspections resulted in 22 violations, averaging 5.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #4,332 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Clarion Sintered Metals, INC. in Ridgway, PA is another manufacturing employer with 6 OSHA inspections on record and $56,200 in current penalties.

5.5
violations per inspection: 77.3%
of violations were serious: #4,332
of 99,447 penalized employers

Compliance score

F 10/100

F OSHA safety compliance: 22 violations across 4 OSHA inspections (5.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Tuftco Finishing Syste…

$56,150
Manufacturing avg

$15,763

What this shows Tuftco Finishing Systems, INC. runs well above peers (3.6x the sector average) in total OSHA penalties.

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$56,150 Bottom 4% least affordable more affordable than 4% of 99,447 U.S. employers with a penalty

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tuftco Finishing Systems, INC..

Tuftco Finishing Systems, INC. has 4 OSHA inspections on record and 22 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tuftco Finishing Systems, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Tuftco Finishing Systems, INC. is the #2,199 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($56,150).

How Tuftco Finishing Systems, INC. Compares

Tuftco Finishing Systems, INC.'s 5.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (3.6x the sector average).

Total Inspections

First Inspection

2011-01-19

Last Inspection

2015-12-16

Inspection Span

5 yrs

Violations / Inspection

5.5

Avg Penalty / Inspection

$14,038

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 5 years, averaging 5.5 violations per visit. That's $14,038 per inspection vs. the Manufacturing average of $6,093.

Serious

77.3% of total

Willful

0.0% of total

Repeat

9.1% of total

Other-Than-Serious

13.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Initial Penalty Assessed

$87,511

Current Penalty Amount

$56,150

Penalty Reduction

35.8%

What this shows Penalties were reduced by $31,361 from the initial assessment of $87,511. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tuftco Finishing Systems, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric	Tuftco Finishing Systems, INC.	Industry Avg
Inspections	4	2.6
Violations	22	8.0
Total Penalty	$56,150	$15,763
Avg Penalty per Inspection	$14,038	$6,093

View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tuftco Finishing Systems, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($56,150 here).

American Equipment Manufacturing, INC. $56,147 NM Hydro Tube Enterprises, INC $56,169 OH The Sherwin-Williams Company $56,129 TX Clarion Sintered Metals, INC. $56,200 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Ispice, LLC 4 insp. Jackson, AL MI-T-M Corporation 4 insp. Peosta, IA Stella-Jones Corporation 4 insp. Warrior, AL R-Tech Tool & Machine, INC. 4 insp. Wamego, KS

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

American Equipment Manufacturing, INC.

Farmington, NM

2 inspections $56,147

Hydro Tube Enterprises, INC

Oberlin, OH

4 inspections $56,169

The Sherwin-Williams Company

Ennis, TX

2 inspections $56,129

Clarion Sintered Metals, INC.

Ridgway, PA

6 inspections $56,200

Arcelormittal Tubular Products USA LLC

Shelby, OH

2 inspections $56,068

Compare Tuftco Finishing Systems, INC. vs American Equipment Manufacturing, INC. side-by-side →

What to do with this record

Use Tuftco Finishing Systems, INC.'s enforcement history as one data point, not the whole picture.

A single employer's record can look unusual in isolation. Compare Tuftco Finishing Systems, INC. against American Equipment Manufacturing, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
See whether Tuftco Finishing Systems, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tuftco Finishing Systems, INC. safe to work at? ▼

Based on OSHA records, Tuftco Finishing Systems, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 22 violations across 4 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.

How many OSHA violations does Tuftco Finishing Systems, INC. have? ▼

Tuftco Finishing Systems, INC. has 22 OSHA violations on record, including 17 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $56,150.

How many OSHA inspections has Tuftco Finishing Systems, INC. had? ▼

Tuftco Finishing Systems, INC. has had 4 OSHA inspections, with the first recorded on 2011-01-19 and the most recent on 2015-12-16. This averages 5.5 violations per inspection.

What is the total penalty amount for Tuftco Finishing Systems, INC.? ▼

Tuftco Finishing Systems, INC. has been assessed $56,150 in current OSHA penalties, reduced from an initial assessment of $87,511 (a 35.8% reduction).

Does Tuftco Finishing Systems, INC. have any serious or willful violations? ▼

Yes. Tuftco Finishing Systems, INC. has 17 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

What industry does Tuftco Finishing Systems, INC. operate in? ▼

Tuftco Finishing Systems, INC. operates in the Manufacturing sector (NAICS code 333292). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.

Where does Tuftco Finishing Systems, INC. rank nationally on OSHA penalties? ▼

Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tuftco Finishing Systems, INC. ranks #4,332 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.

How does Tuftco Finishing Systems, INC.'s safety record compare to industry average? ▼

Tuftco Finishing Systems, INC.'s total OSHA penalty of $56,150 is above the Manufacturing industry average of $15,763 per employer (3.6x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Clarion Sintered Metals, INC. in Ridgway, PA is a similar manufacturing employer with $56,200 in current penalties.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.