Manufacturing · Pittsburgh, PA

Troy Granite

According to OSHA enforcement records (2010–2026), Troy Granite ranks #73,377 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 3 inspections.

Lower half by penalty80% serious
$2,400
OSHA penalties
5
Violations cited
3
OSHA inspections
#73,377
of 99,447 penalized employers

Troy Granite in Pittsburgh, PA has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,400. Federal wage-and-hour enforcement records also show 0 WHD violations against this employer under the Fair Labor Standards Act. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Troy Granite 3 times over 2 years, roughly annually. These inspections resulted in 5 violations, averaging 1.7 per inspection. According to OSHA enforcement records, its total current penalty ranks #73,377 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $0 in back wages owed to an undisclosed number of workers. For comparison, South Jersey Precision Tool & Mold, INC. in Vineland, NJ is another manufacturing employer with 2 OSHA inspections on record and $2,400 in current penalties.

1.7
violations per inspection
80.0%
of violations were serious
#73,377
of 99,447 penalized employers
$0
in back wages recovered

Compliance score

C 79/100
  • C OSHA safety compliance: 5 violations across 3 OSHA inspections (1.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
  • A Wage & hour compliance: $0 in back wages owed across 1 WHD case ($0 per case), vs. national p10 $2K (best) / p90 $58K (worst) among 91,622 employers with a WHD case on file.
Open my watchlist

How Troy Granite compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Troy Granite runs well below peers (0.15x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,400 Top 26% most affordable more affordable than 74% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Troy Granite.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.03.810.41723.630.2OSHA inspectionsViolations citedVIBRACOUSTIC USA, IN…, OSHA inspections: 3 · Violations cited: 14Asap Pallets Inc., OSHA inspections: 3 · Violations cited: 15DAMON INDUSTRIES, OSHA inspections: 3 · Violations cited: 22SHANNON PACKAGING CO., OSHA inspections: 3 · Violations cited: 13FOCUS DIRECT, LLC, OSHA inspections: 3 · Violations cited: 29SALM PARTNERS LLC, OSHA inspections: 3 · Violations cited: 15PAMARCO GLOBAL GRAPH…, OSHA inspections: 3 · Violations cited: 21STYLEX SEATING, INC, OSHA inspections: 3 · Violations cited: 18AGE INDUSTRIES, LTD., OSHA inspections: 3 · Violations cited: 5SIELAFF CORPORATION, OSHA inspections: 3 · Violations cited: 7KELLEY MANUFACTURING…, OSHA inspections: 3 · Violations cited: 10JOHN DEERE COMPONENT…, OSHA inspections: 3 · Violations cited: 9ALUCHEM, INC., OSHA inspections: 3 · Violations cited: 14EMERALD CAROLINA CHE…, OSHA inspections: 3 · Violations cited: 21VOYLES OVERHEAD DOOR…, OSHA inspections: 3 · Violations cited: 19TAUBENSEE STEEL & WI…, OSHA inspections: 3 · Violations cited: 24COASTAL WOOD PRODUCT…, OSHA inspections: 3 · Violations cited: 18CARRY-ON TRAILER COR…, OSHA inspections: 3 · Violations cited: 16DOMTAR PAPER COMPANY…, OSHA inspections: 3 · Violations cited: 15ODOM'S TENNESSEE PRIDE, OSHA inspections: 3 · Violations cited: 8Troy Granite, OSHA inspections: 3 · Violations cited: 5
Troy Granite has 3 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Troy Granite in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Troy Granite ranks #28,712 at $2,400 current penalty.

Combined federal exposure here: $2,400 OSHA penalties plus $0 WHD back wages (0.0% of the combined total is wage recovery).

How Troy Granite Compares

Troy Granite's 1.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.15x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-01-24

Last Inspection

2015-10-09

Inspection Span

2 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$800

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 1.7 violations per visit. That's $800 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

80.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

20.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,500

Current Penalty Amount

$2,400

Penalty Reduction

31.4%

Combined Impact (OSHA + WHD)

$2,400

What this shows Penalties were reduced by $1,100 from the initial assessment of $3,500. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$0
Employees Affected
0
WHD Violations
0

Industry Safety Context: Manufacturing

How Troy Granite compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Troy Granite Industry Avg
Inspections 3 2.6
Violations 5 8.0
Total Penalty $2,400 $15,763
Avg Penalty per Inspection $800 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Troy Granite, both outside PA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Troy Granite vs Texaloy Foundry Company side-by-side →

What to do with this record

Use Troy Granite's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Troy Granite against Texaloy Foundry Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Troy Granite's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Troy Granite also carries $0 in Wage and Hour Division back-wages, a separate enforcement track from OSHA safety violations. How wage-theft enforcement works

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Troy Granite safe to work at?
Based on OSHA records, Troy Granite's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Troy Granite have?
Troy Granite has 5 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,400.
How many OSHA inspections has Troy Granite had?
Troy Granite has had 3 OSHA inspections, with the first recorded on 2014-01-24 and the most recent on 2015-10-09. This averages 1.7 violations per inspection.
What is the total penalty amount for Troy Granite?
Troy Granite has been assessed $2,400 in current OSHA penalties, reduced from an initial assessment of $3,500 (a 31.4% reduction). Additionally, $0 in back wages were owed through WHD enforcement.
Does Troy Granite have any serious or willful violations?
Yes. Troy Granite has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
Has Troy Granite been cited for wage theft?
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Troy Granite, resulting in $0 in back wages owed to an undisclosed number of workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Troy Granite operate in?
Troy Granite operates in the Manufacturing sector (NAICS code 327991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
What should I do if Troy Granite owes me wages?
If you believe Troy Granite owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $0 in back wages owed by this employer across 1 case.
Where does Troy Granite rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Troy Granite ranks #73,377 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Troy Granite's safety record compare to industry average?
Troy Granite's total OSHA penalty of $2,400 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, South Jersey Precision Tool & Mold, INC. in Vineland, NJ is a similar manufacturing employer with $2,400 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.