PlainWorker
Employers › OH

Manufacturing · Dayton, OH

Triangle Precision Industries, INC.

According to OSHA enforcement records (2010–2026), Triangle Precision Industries, INC. ranks #92,988 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 3 inspections.

Lower half by penalty0% serious
$500
OSHA penalties
1
Violations cited
3
OSHA inspections
#92,988
of 99,447 penalized employers

Triangle Precision Industries, INC. in Dayton, OH has been the subject of 3 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $500. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Triangle Precision Industries, INC. 3 times over 2 years, roughly annually. These inspections resulted in 1 violation, averaging 0.3 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #92,988 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Fuqua Tool and Die, LLC in Hendersonville, TN is another manufacturing employer with 2 OSHA inspections on record and $500 in current penalties.

0.3
violations per inspection
0.0%
of violations were serious
#92,988
of 99,447 penalized employers

Compliance score

B 85/100
  • B OSHA safety compliance: 1 violation across 3 OSHA inspections (0.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Triangle Precision Industries, INC. runs well below peers (0.03x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$500 Top 6% most affordable more affordable than 94% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Triangle Precision Industries, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.006.312.618.925.1OSHA inspectionsViolations citedT & D METAL PRODUCTS…, OSHA inspections: 3 · Violations cited: 5CG ROXANE LLC, OSHA inspections: 3 · Violations cited: 6PILGRIM'S PRIDE, OSHA inspections: 3 · Violations cited: 8WELCO ACETYLENE CORP., OSHA inspections: 3 · Violations cited: 24MPV MORGANTON PRESSU…, OSHA inspections: 3 · Violations cited: 16RUIZ FOODS PRODUCT, …, OSHA inspections: 3 · Violations cited: 9RAS PROCESS EQUIPMEN…, OSHA inspections: 3 · Violations cited: 12NIBCO INC., OSHA inspections: 3 · Violations cited: 9IDEAL MANUFACTURING,…, OSHA inspections: 3 · Violations cited: 13DYNATECT LEAD SCREWS…, OSHA inspections: 3 · Violations cited: 18NORTHSTAR DIRECT, LLC, OSHA inspections: 3 · Violations cited: 21JOHN J. STEUBY COMPANY, OSHA inspections: 3 · Violations cited: 21OX PAPERBOARD ILLINO…, OSHA inspections: 3 · Violations cited: 4FORMED FIBER TECHNOL…, OSHA inspections: 3 · Violations cited: 8DAL-TILE DISTRIBUTIO…, OSHA inspections: 3 · Violations cited: 6ORGANIC MATTERS, INC., OSHA inspections: 3 · Violations cited: 21REFLEK MANUFACTURING…, OSHA inspections: 3 · Violations cited: 11FIC AMERICA CORP., OSHA inspections: 3 · Violations cited: 4UNARCO MATERIAL HAND…, OSHA inspections: 3 · Violations cited: 8COMMERCIAL METALS CO…, OSHA inspections: 3 · Violations cited: 5Triangle Precision I…, OSHA inspections: 3 · Violations cited: 1
Triangle Precision Industries, INC. has 3 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Triangle Precision Industries, INC. in the Manufacturing enforcement ledger

In Manufacturing, Triangle Precision Industries, INC. sits at penalty rank #33,820 of 35,243 penalized establishments ($500 assessed).

How Triangle Precision Industries, INC. Compares

Triangle Precision Industries, INC.'s 0.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.03x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-08-30

Last Inspection

2013-12-11

Inspection Span

2 yrs

Violations / Inspection

0.3

Avg Penalty / Inspection

$167

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 0.3 violations per visit. That's $167 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,800

Current Penalty Amount

$500

Penalty Reduction

82.1%

What this shows Penalties were reduced by $2,300 from the initial assessment of $2,800. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Triangle Precision Industries, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Triangle Precision Industries, INC. Industry Avg
Inspections 3 2.6
Violations 1 8.0
Total Penalty $500 $15,763
Avg Penalty per Inspection $167 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Triangle Precision Industries, INC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($500 here).

Warren Industries INC $500 MI Fuqua Tool and Die, LLC $500 TN Perfecseal Incorporated $500 WI BY-Pas International Corporation DBA Quest Car Care Products $500 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

T & D Metal Products, LLC 3 insp. Watseka, IL CG Roxane LLC 3 insp. Olancha, CA Pilgrim's Pride 3 insp. Lufkin, TX Welco Acetylene CORP. 3 insp. Newark, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Fuqua Tool and Die, LLC
Hendersonville, TN
2 inspections $500
Kimberly-Clark Worldwide INC
Ogden, UT
3 inspections $500
Flagstone Foods - el Paso
El Paso, TX
3 inspections $500
Alliance Carolina Tool & Mold Corporation
Arden, NC
2 inspections $500
Anaheim Stone Works, INC.
Anaheim, CA
2 inspections $500

Compare Triangle Precision Industries, INC. vs Fuqua Tool and Die, LLC side-by-side →

What to do with this record

Use Triangle Precision Industries, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Triangle Precision Industries, INC. against Fuqua Tool and Die, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Triangle Precision Industries, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Triangle Precision Industries, INC. safe to work at? ▼
Based on OSHA records, Triangle Precision Industries, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Triangle Precision Industries, INC. have? ▼
Triangle Precision Industries, INC. has 1 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $500.
How many OSHA inspections has Triangle Precision Industries, INC. had? ▼
Triangle Precision Industries, INC. has had 3 OSHA inspections, with the first recorded on 2011-08-30 and the most recent on 2013-12-11. This averages 0.3 violations per inspection.
What is the total penalty amount for Triangle Precision Industries, INC.? ▼
Triangle Precision Industries, INC. has been assessed $500 in current OSHA penalties, reduced from an initial assessment of $2,800 (a 82.1% reduction).
What industry does Triangle Precision Industries, INC. operate in? ▼
Triangle Precision Industries, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Triangle Precision Industries, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Triangle Precision Industries, INC. ranks #92,988 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Triangle Precision Industries, INC.'s safety record compare to industry average? ▼
Triangle Precision Industries, INC.'s total OSHA penalty of $500 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fuqua Tool and Die, LLC in Hendersonville, TN is a similar manufacturing employer with $500 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.